Electric Strikes
Showing Results for Electric Strikes
-
Camden
SKU: CX-1000/74
Camden CX-1000/74 Electric Strike Lock
Network electric strike, 24VDC fail-secure, TCP/IP control
- TCP/IP integration for centralized access control across multiple doors
- Fail-secure locking mode holds strike in locked position during power loss
- 24VDC operation with wall, ceiling, or pole mount for flexible installation
$62.00 $37.99 Save $24.01 -
Camden
SKU: CX-1000/77
Camden CX-1000/77 Electric Strike
- Fail-secure 24VDC design keeps door locked on power loss or panel fault.
- SPDT relay input requires no firmware, VMS, or network integration to deploy.
$115.00 $70.99 Save $44.01 -
Camden
SKU: CX-DE1200-B1
Camden CX-DE1200-B1 15 Second Fixed Exit Delay
- Controls up to 4 doors from a single TCP/IP-networked controller, cutting installation overhead.
- 15-second fixed exit delay supports emergency egress compliance across all coordinated door strikes.
- 24VDC operation with proximity reader compatibility eliminates additional decoder hardware at each door.
$1,400.00 $851.99 Save $548.01 -
Camden
SKU: CX-DE1200-B2
Camden CX-DE1200-B2 30 Second Fixed Exit Delay
- Controls exit delay sequencing across up to 4 doors from a single 24VDC unit.
- Fixed 30-second delay ensures consistent, repeatable egress timing on every cycle.
- Compatible with proximity readers and magnetic locks for straightforward integration.
$1,400.00 $851.99 Save $548.01 -
Camden
SKU: CX-DE1200-B3
Camden CX-DE1200-B3 15 Second Fixed Exit Delay
- Controls up to 4 electromagnetic locks from a single 24VDC module.
- Fixed 15-second egress delay ensures consistent, predictable lock release timing.
- Proximity reader integration supports card/badge credential workflows across all doors.
$1,400.00 $851.99 Save $548.01 -
Camden
SKU: CX-DE1200-N1
Camden CX-DE1200-N1 15/30 Selectable Exit Delay
- Controls up to 4 magnetic lock strikes simultaneously from a single 24 VDC unit.
- Selectable 15 or 30-second exit delay configures field-side without firmware changes.
- TCP/IP connectivity enables remote monitoring, configuration, and audit logging.
$1,400.00 $852.99 Save $547.01 -
Camden
SKU: CX-DE1200-N2
Camden CX-DE1200-N2 15 Second Fixed Exit Delay
- Controls up to 4 magnetic lock doors from a single 24VDC unit.
- TCP/IP communication enables centralized monitoring across networked access control systems.
- 15-second fixed exit delay supports proximity card credential enforcement on every door.
$1,400.00 $851.99 Save $548.01 -
Camden
SKU: CX-DE1200-N3
Camden CX-DE1200-N3 30 Second Fixed Exit Delay
- Controls magnetic strikes across 4 independent doors from a single 24VDC controller.
- TCP/IP connectivity enables centralized remote monitoring and ACS integration over Ethernet.
- 30-second fixed exit delay delivers consistent, synchronized egress timing with proximity readers.
$1,400.00 $851.99 Save $548.01 -
Camden
SKU: CX-DE1200-N4
Camden CX-DE1200-N4 15 Second Fixed Exit Delay
- Controls exit delay timing across 4 independent doors from a single 24VDC device.
- TCP/IP Ethernet connectivity enables centralized monitoring from any access control platform.
- Fixed 15-second egress delay enforces consistent door hold timing for mag lock installations.
$1,400.00 $851.99 Save $548.01 -
Camden
SKU: CX-DE1214-38
Camden CX-DE1214-38 3/8" Filler Plate
- Fills a 3/8" recess gap for flush strike alignment without frame modification.
- Compatible with the full CX-DE1200 series, covering single and double door configs.
- Speeds retrofit installs on hollow metal or wood doors with non-standard jamb widths.
$36.00 $35.99 Save $0.01 -
Camden
SKU: CX-DE1214-58
Camden CX-DE1214-58 5/8" Filler Plate
5/8" metal filler plate for Camden magnetic lock door frame prep
- Standardizes door frame alignment for 4-door access control systems
- Metal construction fits Camden proximity reader magnetic strike setups
- Operates on 24VDC power for integrated security deployments
$39.00 $38.99 Save $0.01 -
Camden
SKU: CX-DE1215
Camden CX-DE1215 1 x 1.5" Angle Bracket
- Mounts CX-DE1200 series single-door delayed egress magnetic locks at 24VDC.
- 1 x 1.5" profile provides standoff clearance for solenoid wiring without cable kinks.
- Compatible with CX-DE1200-N1 through B3 models; not suitable for CX-DE1220 double-door.
$48.00 $47.99 Save $0.01 -
Camden
SKU: CX-DE1216
Camden CX-DE1216 1.5" x 1.5" Angle Bracket
- 1.5" × 1.5" steel bracket ensures precise strike alignment, preserving full magnetic holding force.
- Compatible with CX-DE1200 series single-door and CX-DE1220 double-door 24VDC mag-lock assemblies.
- Fits standard wood, steel, and aluminum door frames with minimal frame modification required.
$48.00 $47.99 Save $0.01 -
Camden
SKU: CX-DE1220-B1
Camden CX-DE1220-B1 15 Second Fixed Exit Delay
- Fixed 15-second exit delay controller for up to 4 doors
- Consistent egress delay timing across all connected doors
- 24VDC operation with magnetic lock strike output drive
$2,525.00 $1,545.99 Save $979.01 -
Camden
SKU: CX-DE1220-N1
Camden CX-DE1220-N1 15/30 Selectable Exit Delay
- Controls up to 4 magnetic locks from one unit, cutting wiring runs and hardware count.
- Selectable 15- or 30-second exit delays per door support varied egress compliance needs.
- TCP/IP connectivity enables remote monitoring and integration with enterprise AC platforms.
$2,525.00 $1,537.99 Save $987.01 -
Camden
SKU: CX-DESPK15SM
Camden CX-DESPK15SM 15W External Audio Speaker Station
- 15W output delivers 90dB+ SPL for clear voice alerts in moderate-noise environments.
- 24VDC operation ties directly into existing access control power—no extra transformer needed.
- Integrates with Camden CX-DE1200 and CX-DE1220 delayed-egress locks for code-compliant audio.
$150.00 $91.99 Save $58.01
Electric Strikes
Electric strikes replace the fixed strike plate in a door frame with an electromechanical unit that releases on command, allowing a door to be pushed or pulled open without retracting the latch bolt. They are the default door control device on most commercial access control openings.
Plan Your Deployment
- Fail-safe (unlocks on power loss) vs. fail-secure (stays locked)
- Voltage (12/24 VDC or 12/24 VAC) and current draw (holding and inrush)
- Frame material: hollow metal, aluminum, or wood
- ANSI/BHMA grade and static strength rating
- Latch monitoring, door position, and tamper signals required
What to Look For
Fail-secure is the standard on most interior commercial openings; fail-safe is required on stair doors, areas of refuge, and egress paths where local code demands free exit. Match voltage to the existing door control panel. ANSI Grade 1 strikes are rated for the heaviest commercial cycles and are recommended on high-traffic doors.
Common Deployment Scenarios
Electric strikes are used on perimeter storefronts, tenant entries, office suite doors, and interior security-zone doors. They are commonly paired with a request-to-exit sensor and door position contact to complete the opening monitoring required by audit trails.