Lifesafety Power · FPO75-D8PE4B

Lifesafety Power FPO75-D8PE4B FPO75-D8PE4B

75W DIN-rail mounted power supply engineered for distributed security deployments where multiple devices require centralized, protected power

• 75W DIN-rail supply delivers 8 independently supervised outputs for multi-zone deployments.
• Per-output supervision enables individual circuit fault isolation across mixed device types.
• Supports 12VDC or 24VDC input rails to fit existing facility power infrastructure.

Lifesafety Power · FPO75-D8PE6M

Lifesafety Power FPO75-D8PE6M FPO75-D8PE6M

75-watt power supply and battery backup unit designed to maintain continuous operation of networked security devices during mains power loss

• 75W regulated DC output sustains cameras and access readers during mains failure.
• Multi-output terminal design allows modular power distribution across several endpoints.
• Compact form factor supports wall-mount or rack installation in network closets and IDF rooms.

Lifesafety Power · FPO75-D8PNLCE4M

Lifesafety Power FPO75-D8PNLCE4M 75W Single Voltage 120 VAC

120VAC single-voltage power supply rated at 75W, designed to centralize power distribution for networked security devices in small to mid-scale

• 75W single-voltage output centralizes power for multiple low-current security loads.
• 120VAC input aligns with standard dedicated AC circuits, reducing distribution complexity.
• Single-voltage design cuts transformer overhead and lowers installation labor on uniform rails.

Lifesafety Power · FPO75/150-2C82D8E8M

Lifesafety Power FPO75/150-2C82D8E8M FPO75/150-2C82D8E8M

Compact, dual-output power supply designed to feed independent power rails in distributed security installations

Lifesafety Power · FPO75/150-2C8P2D8PE4M1

Lifesafety Power FPO75/150-2C8P2D8PE4M1 FPO75/150-2C8P2D8PE4M1

Redundant power supply engineered for distributed security and life-safety installations where dual-channel power distribution and automatic failover

• Redundant dual-channel architecture eliminates single points of failure in critical deployments.
• 75W primary / 150W combined output supports parallel load-balancing across multiple device zones.
• Eight isolated power circuits across 2 distribution boards enable flexible per-zone circuit assignment.

Lifesafety Power · FPO75/150-C4C82D8PE4M1

Lifesafety Power FPO75/150-C4C82D8PE4M1 16 Door

16-door rated power distribution module designed for small-to-mid-sized access control installations

• Supports up to 16 doors from a single 12V DC power distribution module.
• Consolidates lock, reader, and ancillary device power to reduce panel clutter.
• Fits small-to-mid-sized access control installs with room for moderate expansion.

Lifesafety Power · FPO75/150-C4C82D8PE8M1

Lifesafety Power FPO75/150-C4C82D8PE8M1 FPO75/150-C4C82D8PE8M1

75W redundant power supply built for security systems requiring continuous uptime and failover protection

• 75W redundant output eliminates single points of failure in camera and access control systems.
• Automatic switchover between dual AC inputs requires no manual intervention or system restart.
• Configuration code C4C82D8PE8M1 defines output voltage, terminal layout, and supervision protocol.

Lifesafety Power · FPO75/150-C4PD8PE1

Lifesafety Power FPO75/150-C4PD8PE1 FPO75/150-C4PD8PE1

Redundant power supply designed for distributed security deployments where loss of primary power cannot interrupt video, access control, or alarm

• Dual independent output rails isolate loads, preventing a single fault from dropping all circuits.
• Redundant architecture supports 99.5%+ uptime deployments for NVRs, access panels, and alarms.
• Separate circuit inputs allow phase or UPS isolation, maximizing protection against power events.

Lifesafety Power · FPO75/150-C4PD8PE2

Lifesafety Power FPO75/150-C4PD8PE2 FPO75/150-C4PD8PE2

Regulated, dual-output power supply designed for surveillance and access-control installations where independent circuit management is required

Lifesafety Power · FPO75/150-C8D8E2

Lifesafety Power FPO75/150-C8D8E2 FPO75/150-C8D8E2

Dual-voltage power supply enclosure designed for access control systems, surveillance networks, and distributed lock / solenoid applications

• Delivers 75W at 12V or 150W at 24V to match your downstream device requirements.
• Eight fused 3A auxiliary outputs distribute power to multiple locks or control boards.
• Compact E2 enclosure mounts in server rooms, electrical closets, or equipment racks.

Lifesafety Power · FPO75/150-C8D8E4

Lifesafety Power FPO75/150-C8D8E4 FPO75/150-C8D8E4

N industrial-grade power distribution unit designed to supply regulated direct current to distributed security and life-safety equipment in fixed

• Dual-output design powers multiple security devices from a single field-installed unit.
• Centralized power supervision simplifies monitoring of cameras, readers, and alarm loads.
• Standard hand-tool installation reduces deployment time in warehouse and enterprise sites.

Lifesafety Power · FPO75/150-C8D8E4A

Lifesafety Power FPO75/150-C8D8E4A FPO75/150-C8D8E4A

225W access control power supply purpose-built for multi-door installations requiring simultaneous 12V and 24V output rails

• 225W total output powers simultaneous 12V and 24V rails for multi-door deployments.
• 8 onboard DIN relay modules control up to 8 independent door strike or lock zones.
• Steel E4A enclosure (24×20×4.5 in) supports surface-mount or 19-inch rack integration.

Lifesafety Power · FPO75/150-C8D8E4S

Lifesafety Power FPO75/150-C8D8E4S FPO75/150-C8D8E4S

Compact, wall-mountable power distribution enclosure designed for small to mid-scale surveillance deployments

• Delivers 225W total across dual 12V and 24V outputs from a single enclosure.
• E4S form factor (24×20×4.5 in) mounts to 19-inch racks or wall surfaces.
• Supports mixed-voltage loads — IP cameras on 12V, access readers on 24V.

Lifesafety Power · FPO75/150-C8D8PE4M1

Lifesafety Power FPO75/150-C8D8PE4M1 8 Door

N 8-door industrial power supply designed to provision and supervise access control systems in facilities requiring hardened power distribution

• Provisions and supervises 8 door circuits from a single centralized unit.
• Integrated circuit supervision detects open, short, and tamper faults per door.
• Battery backup eliminates the need for separate UPS units at each door location.

Lifesafety Power · FPO75/150-C8D8PE8M

Lifesafety Power FPO75/150-C8D8PE8M 8 Door

Multi-output power supply engineered for small- to mid-scale access control deployments

• 8 independent output channels isolate door lock and reader circuits across up to 8 access points.
• Centralized regulated DC power reduces field wiring complexity in warehouses and office deployments.
• Battery power support maintains lock and reader operation during primary power interruptions.

Lifesafety Power · FPO75/150-C8PD8PE2

Lifesafety Power FPO75/150-C8PD8PE2 8 lock 8 auxiliary outputs cl

75W class 2 power distribution enclosure built for access control and low-voltage security systems

• Supplies 8 dedicated lock outputs and 8 auxiliary outputs from one enclosure.
• Dual-rated 75W/150W lets you scale multi-door deployments without swapping hardware.
• Class 2 limited outputs at 2.5A each; no per-circuit overcurrent protection required.

Lifesafety Power · FPO75/150-C8PD8PE4

Lifesafety Power FPO75/150-C8PD8PE4 Preconfigured single and dual

Preconfigured power distribution unit designed for small-to-mid-scale security deployments where single and dual voltage circuits are required

• Ships preconfigured, eliminating field setup time and reducing commissioning complexity.
• Supports mixed single and dual voltage circuits for cameras and access control from one unit.
• Fixed preconfiguration suits small-to-mid-scale deployments; verify specs before ordering.

Lifesafety Power · FPO75/150-C8PD8PE4M

Lifesafety Power FPO75/150-C8PD8PE4M FPO75/150-C8PD8PE4M

Compact, dual-channel power distribution supply designed for IP-based security installations where devices operate on 12VDC or 24VDC

• Dual-channel design powers 12VDC and 24VDC devices from a single enclosure.
• DIN-rail mount simplifies integration into existing security control panels.
• Separate output rails prevent cross-voltage damage to mixed downstream devices.

Lifesafety Power · FPO75/150-C8PD8PE4M1

Lifesafety Power FPO75/150-C8PD8PE4M1 FPO75/150-C8PD8PE4M1

225W modular power supply enclosure built for distributed access-control and security systems that require multiple independent 12V and 24V auxiliary

• 225W modular enclosure centralizes 12V/24V distribution across multi-zone access systems.
• Eight relay-driven outputs independently feed door locks, strikes, or Class 2 signaling devices.
• Class 2 power-limited outputs simplify code compliance for downstream access-control devices.

Lifesafety Power · FPO75/150-C8PD8PE4S

Lifesafety Power FPO75/150-C8PD8PE4S 8DR SWH Pro specific 12V &

225W dual-output power supply engineered specifically for 8DR SWH Pro access control systems

• 225W dual-output supply powers both 12V and 24V readers from a single unit.
• E4S enclosure (24H × 20W × 4.5D in.) fits standard 19-inch rack or wall cabinet.
• Purpose-built for 8DR SWH Pro platforms, eliminating daisy-chained power units.

Lifesafety Power · FPO75/150-E2

Lifesafety Power FPO75/150-E2 FPO75/150-E2

Dual-voltage access control and surveillance power supply designed to feed mid-scale security systems — door locks, readers, cameras, intercoms

• Dual-voltage output (12VDC/24VDC) feeds locks, readers, and cameras from one supply.
• Base 75W capacity expands to 150W via modules, scaling with growing access control loads.
• E2 enclosure protects internal components from dust, vibration, and incidental moisture.

Lifesafety Power · FPO75/250-2C82D8E4V1

Lifesafety Power FPO75/250-2C82D8E4V1 FPO75/250-2C82D8E4V1

150W rack-mount power supply designed to feed 16 independent fused outputs for access control systems, specifically Vertx door locks and auxiliary

• 150W rack-mount supply drives 16 independently fused outputs for access control circuits.
• Dual-voltage rails (12V DC / 24V DC) support Vertx locks and auxiliary devices from one unit.
• 24"H × 20"W × 4.5"D enclosure fits standard 19" relay racks alongside breakers and terminals.

Lifesafety Power · FPO75/75-C4D8E1

Lifesafety Power FPO75/75-C4D8E1 4 Lock 8 Aux Outputs 6A/12V

75W modular power supply designed for multi-output access control and door-locking systems

• Dual-voltage output (6A @ 12VDC or 3A @ 24VDC) fits mixed lock and reader loads.
• Eight independently fused 3A auxiliary outputs isolate faults to a single channel.
• Four dedicated lock outputs in an E1 cabinet eliminate external distribution modules.

Lifesafety Power · FPO75/75-C4PD8PE1

Lifesafety Power FPO75/75-C4PD8PE1 4 Lock 8 Aux Outputs 6A/12V

Compact 75W power distribution cabinet designed to supply and manage power to electric locks and auxiliary devices in access control and security

• 75W cabinet delivers 4 supervised lock outputs plus 8 Class 2 aux channels.
• Selectable 6A/12V or 3A/24V output supports mixed locking hardware from one unit.
• Each aux channel is independently current-limited to 2.5A for per-device protection.

Lifesafety Power · FPO75/75-C4PD8PE4M

Lifesafety Power FPO75/75-C4PD8PE4M FPO75/75-C4PD8PE4M

75-watt fixed-output power supply designed for distributed security system deployments where separate regulated outputs are required

Lifesafety Power · FPO75/75-C8D8E2

Lifesafety Power FPO75/75-C8D8E2 8 lock 8 auxiliary outputs fuse

75W fused power distribution enclosure designed for access control and surveillance systems requiring isolated, individually fused outputs for

• 16 individually fused 3A outputs isolate faults so one short never kills the whole system.
• Dual-voltage operation (6A @ 12V or 3A @ 24V) supports both 12V and 24V lock architectures.
• 75W total budget across 8 lock and 8 auxiliary channels suits multi-door access deployments.

Lifesafety Power · FPO75/75-C8PD8PE2

Lifesafety Power FPO75/75-C8PD8PE2 8 lock 8 auxiliary outputs cl

75W distributed power module designed to supply lock and auxiliary device control in multi-door or multi-zone access control installations

• Delivers 75W distributed power across 8 lock outputs and 8 auxiliary outputs.
• Each output is independently current-limited to 2.5A for class 2 power-limited circuits.
• Configures for 6A/12V or 3A/24V DC — specify voltage at order time.

Lifesafety Power · FPV102-2D8E1

Lifesafety Power FPV102-2D8E1 10A/12V 16 Auxillary Outputs

Compact 12VDC power distribution module rated at 10 amps continuous output, designed to supply and manage power to multi-camera surveillance systems

• 10A continuous at 12VDC supports 8–12 fixed cameras or mixed PTZ and relay loads.
• 16 auxiliary outputs allow independent fusing and fault isolation per downstream device.
• Centralized distribution eliminates stacked wall supplies, reducing wiring complexity.

Lifesafety Power · FPV102-D8E1

Lifesafety Power FPV102-D8E1 10A/12V 8 Auxillary Outputs

12VDC, 10-ampere power supply engineered to distribute power across multiple security devices in a single installation

• 12VDC at 10A total output powers up to 10 one-amp cameras from one supply.
• Eight isolated auxiliary outputs improve fault isolation—one tripped circuit won't drop others.
• Consolidates distributed 12V loads, eliminating separate transformers per device in the rack.

Lifesafety Power · FPV102-E1

Lifesafety Power FPV102-E1 10A/12V Ps/Enclosure

10-ampere, 12-volt power supply housed in a dedicated equipment enclosure

• Delivers 10A at 12VDC (120W) to power 4–6 IP cameras or mixed access control loads.
• Enclosed form factor shields power electronics from moisture and accidental contact.
• Centralizes 12VDC distribution from a single node, simplifying multi-device wiring.

Lifesafety Power · FPV102-R8E1

Lifesafety Power FPV102-R8E1 10A/12V 8 Lock Outputs

12-volt regulated power supply rated for 10 amperes maximum output, configured with 8 independent relay lock outputs

• Centralized 12V/10A regulated supply drives up to 8 independent relay lock outputs.
• Eight onboard relay outputs eliminate discrete relay banks in access control cabinets.
• Cabinet-mount form factor suits mag locks, electric strikes, and REX device deployments.

Lifesafety Power · FPV104-2D8E1

Lifesafety Power FPV104-2D8E1 10A/24V 16 Auxillary Outputs

Regulated 24VDC power supply rated at 10 amps output, designed to feed multiple downstream security devices and control circuits in integrated access

• Regulated 24VDC at 10A powers up to 16 downstream devices from one source.
• 16 auxiliary outputs reduce panel footprint and simplify access control wiring.
• Supports cameras, electric strikes, mag locks, and relay modules on a 24V rail.

Lifesafety Power · FPV104-D8E1

Lifesafety Power FPV104-D8E1 10A/24V 8 Auxillary Outputs

10-amp 24VDC regulated power supply with 8 separately supervised auxiliary outputs, designed for integrators deploying access control, intrusion

• 10A at 24VDC regulated output powers multiple readers, strikes, and sensors from one source.
• 8 independently supervised auxiliary outputs enable per-circuit fault detection and isolation.
• Cabinet-mount design centralizes distributed 24VDC power for access control and intrusion panels.

Lifesafety Power · FPV104-E1

Lifesafety Power FPV104-E1 10A/24V Ps/ Enclosure

10-ampere, 24-volt regulated power supply housed in a wall- or rack-mount enclosure

• Delivers regulated 24VDC at 10A to support mid-sized camera and reader arrays.
• Wall- or rack-mount enclosure centralizes DC distribution, eliminating per-device wall-warts.
• Terminal blocks accept 18–14 AWG copper wiring for standard low-voltage field connections.

Lifesafety Power · FPV104-R8E1

Lifesafety Power FPV104-R8E1 10A/24V 8 Lock Outputs

Regulated 24VDC power supply rated for 10A continuous output, designed to serve multiple electromagnetic lock circuits in access control and security

• Regulated 24VDC at 10A continuous output powers up to 8 electromagnetic lock circuits.
• Eight individual outputs consolidate mid-scale door control wiring into a single supply.
• Sized for 4–8 door deployments; calculate per-lock draw to stay within 10A total.

Lifesafety Power · FPV4-B100E1

Lifesafety Power FPV4-B100E1 2A/12V 2A/24V

Compact 2-ampere power supply delivering selectable 12VDC or 24VDC output, purpose-built for small-to-medium IP security camera deployments and

• Switchable 12V/24V output eliminates stocking separate PSUs for mixed-voltage jobs.
• 2A per output supports 2–4 compact dome cameras on a single 12V branch.
• Compact form factor fits shallow wall-mount or DIN rail enclosures with constrained space.