Lifesafety Power FPV104-E1 10A/24V Power Supply Enclosure
Overview
The FPV104-E1 is a 10-ampere, 24-volt regulated power supply housed in a wall- or rack-mount enclosure. This form factor consolidates DC power distribution for networked security systems—cameras, intercoms, access control readers, and supplemental devices—in installations where centralized, protected power delivery is required. The 10A output capacity supports mid-sized camera arrays or mixed device loads in warehouse, retail, or campus deployments where multiple devices require synchronized 24VDC without individual wall-wart supplies.
Compatibility
The FPV104-E1 supplies regulated 24VDC suitable for any legacy or current security device rated for 24V operation. Verify the total system current draw does not exceed 10 amperes at full load; sum all connected device current ratings (typically 0.3–1.5A per camera, 0.5A per reader, 1–2A per solenoid). This enclosure is commonly deployed in power supply and backup systems for networked IP surveillance installations and mixed legacy/IP hybrid environments.
Installation Notes
The enclosure design enables DIN-rail or wall mounting in electrical closets or equipment racks. Ensure adequate ventilation around the unit; do not enclose in unvented cabinets unless thermal design specifies continuous-duty operation. Terminal block wiring is standard 18–14 AWG copper for main DC output. Confirm input AC mains voltage matches the unit rating before powering on. All connections should be made with appropriate strain relief and cable glands if the enclosure is exposed to vibration or environmental ingress.
