Lifesafety Power FPV104-2D8E1 10A/24VDC Power Supply

Overview

The Lifesafety Power FPV104-2D8E1 is a regulated 24VDC power supply rated at 10 amps output, designed to feed multiple downstream security devices and control circuits in integrated access control and surveillance deployments. The 16 auxiliary outputs allow parallel distribution to multiple cameras, readers, locks, or relay modules from a single centralized power source — reducing panel footprint and simplifying wiring.

Compatibility

Fits standard security equipment racks and integration enclosures where 24VDC rail power is specified. The FPV104-2D8E1 supports any 24V-powered device: IP cameras drawing PoE midspan injection, electric strike locks, magnetic door holders, relay modules, and field I/O cards. Verify your downstream load totals do not exceed the 10A aggregate output ceiling.

Installation Notes

Confirm input AC voltage matches your facility mains (typically 110–240V, but verify against your specific unit). Wire auxiliary outputs according to circuit current draw — oversizing wires for long runs (50+ feet) minimizes voltage drop at the device. Do not exceed 10A total across all 16 outputs simultaneously; distribute high-draw loads across separate outputs if available. Ensure adequate enclosure ventilation if mounted in a confined cabinet.

When to Choose a Different Model

If your total load exceeds 10A, or if you need higher voltage (12V, 48V) or AC output, evaluate other Lifesafety Power supplies in the same family with higher current ratings or alternative voltage specifications. Consult a power distribution planning guide to calculate aggregate device loads before ordering.