Lifesafety Power FPV102-E1 10A/12V Power Supply Enclosure
Overview
The FPV102-E1 is a 10-ampere, 12-volt power supply housed in a dedicated equipment enclosure. This unit addresses the core infrastructure challenge in distributed security deployments: delivering stable, continuous 12VDC to multiple cameras, access control readers, and auxiliary devices across a facility without introducing noise or voltage sag that degrades image quality or reader performance.
The 10-ampere capacity at 12V provides 120 watts of usable power—sufficient to feed a mid-scale camera cluster (4–6 standard IP cameras) or a mixed-load control cabinet (readers, locks, sensors, cameras combined). The enclosed form factor isolates the power electronics and any battery backup hardware from environmental exposure, moisture, and accidental contact, reducing field troubleshooting and extending component lifespan in warehouse, retail, and light industrial settings.
Compatibility
The FPV102-E1 integrates into security systems that require centralized 12VDC distribution from a single power node. It is commonly paired with commercial power supplies and access control systems that do not have integrated PoE or require redundant power architecture. Consult system documentation to confirm voltage and amperage requirements before installation.
Installation Considerations
Verify that the enclosure can be mounted near the primary equipment rack or in a secure, climate-controlled utility space. Ensure adequate ventilation if battery backup hardware is integrated inside the unit. Confirm that the 12VDC output connectors match the input terminals on target devices (screw terminals, DIN connectors, or proprietary fittings vary by configuration). Ground the enclosure per local electrical code to prevent transient damage to downstream devices.
