Lifesafety Power FPO75/75-C4PD8PE1 4-Lock 8-Output Power Cabinet
Overview
The FPO75/75-C4PD8PE1 is a compact 75W power distribution cabinet designed to supply and manage power to electric locks and auxiliary devices in access control and security installations. The unit consolidates multiple outputs into a single enclosure, reducing panel clutter and simplifying wiring in confined equipment cabinets where space constraints and wire density are critical concerns.
Power Outputs & Distribution
The cabinet provides 4 dedicated lock outputs and 8 auxiliary outputs. Each auxiliary output is Class 2 power-limited and rated for 2.5A maximum draw per channel. Total rated capacity is 75W, available in either 6A/12V or 3A/24V configuration depending on your downstream load requirements. This voltage flexibility accommodates both 12VDC and 24VDC locking hardware and sensors without requiring separate supply hardware. Lock outputs are supervised, enabling detection of door strike faults or wiring failures.
Installation Context
Mount this unit within your access control panel or equipment enclosure. E1 enclosure rating indicates suitability for general indoor commercial environments. Plan wiring runs from the cabinet to distributed locks and sensors; each auxiliary channel can independently support up to 2.5A, enabling per-device current limiting and short-circuit protection. Verify total 75W budget across all active outputs before commissioning — simultaneous high-load operation on multiple channels will approach or exceed capacity.
When to Choose a Different Model
If your installation requires more than 8 auxiliary outputs or higher per-channel current capacity (above 2.5A), evaluate larger-capacity units in the Lifesafety Power cabinet family. If you need integrated battery backup or uninterruptible power for extended hold times on door strikes during mains failure, consult a power supply with integrated UPS or charger support.
