Lifesafety Power FPV4-B100E1 Dual-Output 2A Power Supply

Overview

The FPV4-B100E1 is a compact 2-ampere power supply delivering selectable 12VDC or 24VDC output, purpose-built for small-to-medium IP security camera deployments and networked access control systems. The switchable voltage output eliminates the need to stock multiple PSU variants — configure once at installation, then lock in the output voltage for the entire installation lifespan. A 2A rating per output supports multiple mid-range fixed cameras or a single PTZ unit without auxiliary boosters.

Compatibility

The FPV4-B100E1 integrates into power supply and enclosure configurations where mixed 12V and 24V equipment must coexist on a single shelf or DIN rail. Verify specific camera or access-control module voltage requirements before deployment — the switchable design prevents accidental overvoltage to downstream devices. Works with standard security-grade cabling and distribution blocks.

Typical Deployment

Install in shallow wall-mount or rack enclosures where space is constrained and redundancy is not required. The 2A ceiling makes it suitable for low-power camera arrays (2–4 compact domes per 12V branch, or 1–2 per 24V branch depending on lens motor draw). Not intended as primary power for high-current PTZ units without load analysis.

Voltage Selection Benefit

Switchable 12V/24V output reduces inventory overhead on mixed-platform jobs and simplifies troubleshooting — no need to confirm PSU variant during site visits. Set the voltage jumper or selector at the bench, label clearly, and deploy.