Lifesafety Power FPO75/250-2C82D8E4V1 FPO75/250-2C82D8E4V1

Lifesafety Power FPO75/250-2C82D8E4V1 Access Control Power Supply

Overview

The FPO75/250-2C82D8E4V1 is a 150W rack-mount power supply designed to feed 16 independent fused outputs for access control systems, specifically Vertx door locks and auxiliary devices. This is your consolidation point when you're running multiple electronically controlled entry points from a single location and need redundant, fused distribution without building a custom harness.

Compatibility

Purpose-built for Vertx system architecture, the FPO75/250-2C82D8E4V1 supplies both 12V DC (6A rail) and 24V DC (10A rail) — the two standard voltages for commercial access control hardware. Fused outputs protect individual lock circuits, so a single door solenoid fault won't cascade across the entire system. Verify your Vertx control panel and lock model documentation to confirm voltage and current draw per device before load planning.

Installation Notes

The E4V1 enclosure is 24 inches high, 20 inches wide, and 4.5 inches deep — sized for standard 19-inch relay racks with room for breaker panel and terminal blocks alongside. Fused output design means each of the 16 circuits is independently protected; replacement fuses are a standard service item. Ensure main AC input is sized for 150W total load and termination is via appropriate gauge wire for your breaker and distance run. Consult the Vertx integration guide for correct output assignment (12V vs. 24V) and polarity on each lock circuit.