Lifesafety Power · FPO150-B100C8D8PE4M1

Lifesafety Power FPO150-B100C8D8PE4M1 FPO150-B100C8D8PE4M1

150W wall-mount power supply enclosure rated for dual 12V and 24V output, designed to feed distributed camera arrays, lock controllers, and

• Delivers 150W at dual 12V/24V output to feed cameras, locks, and sensors.
• 8-channel mercury relay module enables coordinated switching across multi-zone loads.
• Wall-mount profile (24×20×4.5 in) fits IT closets and junction boxes efficiently.

Lifesafety Power · FPO150-B100C8D8PE4X

Lifesafety Power FPO150-B100C8D8PE4X 150W Dual Voltage 120 VAC 8

150W power distribution unit designed for surveillance and access control systems requiring redundant power feeds and multiple relay outputs

• 150W output supports multi-door lock circuits and auxiliary devices on one unit.
• Eight relay outputs switch 12VDC solenoid locks; eight aux outputs deliver 24VDC signaling.
• 120VAC single-phase input simplifies branch circuit planning in hardwired access control installs.

Lifesafety Power · FPO150-B100C8D8PE6M/T8-A

Lifesafety Power FPO150-B100C8D8PE6M/T8-A 150W Dual Voltage 120

150W dual-voltage power supply designed for access control and surveillance infrastructure requiring distributed relay-driven door locks, gate

• 150W capacity supports mid-scale multi-door deployments from a single chassis.
• 8 relay lock outputs and 8 auxiliary outputs enable independent per-door power zones.
• Accepts 120 VAC input; compatible with 12 VDC or 24 VDC relay-switched lock circuits.

Lifesafety Power · FPO150-B100C8D8PE6M1

Lifesafety Power FPO150-B100C8D8PE6M1 FPO150-B100C8D8PE6M1

Supervised, dual-input redundant power supply designed for security and life-safety systems requiring uninterrupted operation across multiple load

• Dual AC inputs eliminate single-point-of-failure risk on mains power.
• Supervised outputs report load-circuit faults directly to the control panel.
• 150W capacity supports access control, CCTV, and alarm circuits simultaneously.

Lifesafety Power · FPO150-B100C8E4M

Lifesafety Power FPO150-B100C8E4M FPO150-B100C8E4M

150-watt regulated power supply from Lifesafety Power

Lifesafety Power · FPO150-B100C8P2D8PE6M/P8-A

Lifesafety Power FPO150-B100C8P2D8PE6M/P8-A FPO150-B100C8P2D8PE6M

150W regulated power supply designed for security and access control system integration

• 150W regulated output supports mid-to-large camera arrays and mixed access control loads.
• 8 independent output channels allow isolated rail assignment for devices with varied voltage needs.
• Integrated battery backup and supervision circuitry ensures failover and fault alerting in 24/7 deployments.

Lifesafety Power · FPO150-B100C8P2D8PE6M/P8-C

Lifesafety Power FPO150-B100C8P2D8PE6M/P8-C FPO150-B100C8P2D8PE6M

150W modular power supply designed for multi-output security and access control deployments

• 150W modular architecture supports multi-output security and access control deployments.
• Field-configurable output modules adapt to changing circuit requirements without full replacement.
• Individual circuit protection allows channel reconfiguration without powering down the supply.

Lifesafety Power · FPO150-B100C8PD8PE2

Lifesafety Power FPO150-B100C8PD8PE2 150W Dvps 12/24 8 Lock Contr

150W distributed power supply designed for access control and security systems requiring multiple independent lock outputs

• Dual 12VDC and 24VDC rails in one enclosure eliminate separate supplies for mixed-voltage deployments.
• Eight supervised, power-limited outputs at 2.5A each isolate circuits so one fault won't collapse the bus.
• 150W total capacity with 4A per rail supports simultaneous lock, reader, and control circuit loading.

Lifesafety Power · FPO150-B100C8PD8PE4A

Lifesafety Power FPO150-B100C8PD8PE4A 8DR AMAG specific with 8 au

150W Class 2 power supply purpose-built for AMAG-based access control and auxiliary device circuits

• Eight discrete 2.5A outputs eliminate daisy-chaining across multi-door AMAG deployments.
• Dedicated 12V and 24V rails at 4A each power readers and strikes on independent circuits.
• Class 2 certified 150W supply ships in an E4 enclosure ready for 19-inch or wall-mount rack.

Lifesafety Power · FPO150-B100C8PD8PE4M

Lifesafety Power FPO150-B100C8PD8PE4M FPO150-B100C8PD8PE4M

150W distributed-voltage power supply rated for access control and intrusion alarm infrastructure

• Delivers 150W total with simultaneous 4A at 12V and 4A at 24V outputs.
• Supports 8 door lock circuits and 8 Class 2-rated auxiliary outputs at 2.5A each.
• E4M enclosure with Mercury backplate suits constrained security closets and cabinets.

Lifesafety Power · FPO150-B100C8PD8PE4M1

Lifesafety Power FPO150-B100C8PD8PE4M1 FPO150-B100C8PD8PE4M1

150-watt regulated power supply designed for IP security camera installations, access control systems, and integrated physical security deployments

• 150W regulated output consolidates power for cameras, readers, and door strikes.
• Eight independently fused channels limit fault propagation across connected devices.
• PD supervision monitors per-channel power delivery for proactive fault detection.

Lifesafety Power · FPO150-B100C8PD8PE4V1

Lifesafety Power FPO150-B100C8PD8PE4V1 FPO150-B100C8PD8PE4V1

150W power distribution enclosure designed to supply and protect door locks, magnetic latches, and auxiliary access control devices in multi-zone

• 150W access control power supply for door locks and latches
• Multi-zone power distribution for facility deployments
• Equipment cabinet enclosure for protected install

Lifesafety Power · FPO150-B100C8PD8PE6V

Lifesafety Power FPO150-B100C8PD8PE6V FPO150-B100C8PD8PE6V

150-watt regulated power supply designed for access control, intrusion detection, and networked security device deployments where distributed DC

• 150W regulated output supports multiple DC devices from a single centralized supply.
• Eliminates individual wall supplies, reducing installation labor on multi-device builds.
• Compatible with 12VDC and 24VDC readers, door strikes, and motion sensors.

Lifesafety Power · FPO150-B100C8PE2M

Lifesafety Power FPO150-B100C8PE2M 150W Dual Voltage 120 VAC 8

150W switching power supply designed for access control panels, locking mechanisms, and distributed security infrastructure requiring dual-voltage

• Delivers 150W across 8 relay lock outputs for multi-zone door hardware control.
• 120 VAC input integrates directly with standard building power—no step-down required.
• Relay-driven outputs support door strikes, mag-locks, and fail-safe latches in one supply.

Lifesafety Power · FPO150-B100C8PE4M1

Lifesafety Power FPO150-B100C8PE4M1 FPO150-B100C8PE4M1

150-watt managed power supply designed to centralize voltage distribution and load management across networked surveillance installations

• 150W managed supply centralizes power for 4–8 camera circuits in one unit.
• Per-channel fault isolation prevents a single load failure from taking down adjacent circuits.
• Accepts AC 110–240V input, suitable for standard commercial building infrastructure.

Lifesafety Power · FPO150-B100E1

Lifesafety Power FPO150-B100E1 FPO150-B100E1

150W dual-voltage power supply that delivers up to 4A at 12V and 4A at 24V simultaneously — solving the common integration problem where a single

• Delivers 4A at 12V and 4A at 24V simultaneously from a single 150W supply.
• Eliminates separate power feeds for mixed 12V sensors and 24V access control devices.
• E1 enclosure fits standard wall-mount or rack installs in control rooms and closets.

Lifesafety Power · FPO150-B150C8D8PE4M

Lifesafety Power FPO150-B150C8D8PE4M 150W selectable 12/24V 12A

150W programmable dual-voltage power supply with 8 auxiliary power outputs and integrated fire alarm interface

• 150W supply runs up to 12A at 12V or 6A at 24V for multi-door deployments.
• 8 individually fused auxiliary outputs allow independent circuit protection per door.
• Integrated fire alarm interface supports fail-safe and fail-secure lock switching.

Lifesafety Power · FPO150-B150C8D8PE4M1

Lifesafety Power FPO150-B150C8D8PE4M1 150W Dual Voltage 120 VAC

150W dual voltage power supply rated for 120 VAC input

• 150W at 120 VAC input supports mid-sized multi-door access control deployments.
• 8 relay lock outputs drive EM locks and REX devices across independent door circuits.
• 8 auxiliary outputs power sensors and ancillary devices without a separate supply.

Lifesafety Power · FPO150-BOXED

Lifesafety Power FPO150-BOXED FPO150-BOXED

150W boxed power supply designed for small- to medium-scale security deployments where compact form factor and reliable DC output are required

• 150W rated output handles mixed loads—cameras, readers, and door strikes in one zone.
• 12 VDC output suits standard access control readers and low-voltage security cameras.
• Factory-boxed enclosure eliminates on-site assembly, reducing installation labor at remote sites.

Lifesafety Power · FPO150-C4D8E1

Lifesafety Power FPO150-C4D8E1 150W Svps 4 Aux Out CONTROLLED8 Au

Compact 150W supervised power supply engineered for small-to-mid-scale security installations where you need distributed power with individual

• Delivers 12A at 12VDC or 6A at 24VDC to power cameras, strikes, and controllers.
• Four independent 3A-fused outputs isolate faults and prevent cascading circuit failures.
• 150W supervised supply suits small-to-mid-scale distributed security deployments.

Lifesafety Power · FPO150-C4E2M

Lifesafety Power FPO150-C4E2M FPO150-C4E2M

Compact 150W power supply designed to support distributed security deployments where multiple devices require independent, supervised power rails

Lifesafety Power · FPO150-C4PE1

Lifesafety Power FPO150-C4PE1 4 lock outputs class 2 pwr ltd at 2

150W class 2 power supply housed in an E1 enclosure, purpose-built for access control and lock management in commercial security systems

• Four independent 2.5A outputs support 12V or 24V locks from a single 150W supply.
• Class 2 rating eliminates separate power-limited circuit wiring for each lock run.
• E1 enclosure suits cabinet or wall-mount install in commercial controlled environments.

Lifesafety Power · FPO150-C82D8E2

Lifesafety Power FPO150-C82D8E2 150W Single Voltage 120 VAC 8 Re

150W single-voltage (120 VAC input) power supply designed for access control and surveillance integration environments

• Delivers 150W regulated output to power multiple door strikes and mag locks.
• Eight relay lock outputs enable dedicated switched control for each door circuit.
• 16 auxiliary output circuits support alarm devices, strobes, and ancillary loads.

Lifesafety Power · FPO150-C82D8PE4M/T8-A

Lifesafety Power FPO150-C82D8PE4M/T8-A 150W Single Voltage 120

150W single voltage 120VAC power distribution unit designed for access control, security, and life-safety system installations

• Delivers 150W at 120VAC input to power locks, readers, and exit devices across zones.
• Eight dedicated relay lock outputs enable direct control of electric locks and strike plates.
• Sixteen auxiliary outputs support signaling and device switching in multi-door deployments.

Lifesafety Power · FPO150-C8D8E2

Lifesafety Power FPO150-C8D8E2 8 Lock 8 Auxout 12A/12V 6A/24V

150W regulated power supply enclosure designed to distribute power to distributed access control and security subsystems

• Delivers 12VDC/12A or 24VDC/6A to match existing lock infrastructure without rewiring.
• 8 individually fused 3A auxiliary outputs isolate faults to a single circuit, not the whole panel.
• 150W regulated cabinet supports 8 lock outputs across multi-door access control deployments.

Lifesafety Power · FPO150-C8E1

Lifesafety Power FPO150-C8E1 150W Svps 8 Lock Out E1 Cab

150W supervised power supply housed in an E1 enclosure, designed to distribute fused 12VDC or 24VDC power to access control, alarm, and security

• Eight independently fused 3A outputs isolate faults and protect downstream devices.
• 150W total capacity supports 12A at 12VDC or 6A at 24VDC for multi-door deployments.
• Supervised E1 cabinet enables real-time fault reporting to control panels or monitoring stations.

Lifesafety Power · FPO150-C8E2

Lifesafety Power FPO150-C8E2 12A/12V Or 6A/24V E2 Enclosure+ 8 Re

Compact, dual-voltage power enclosure designed to supply low-voltage DC power and relay switching to access control systems, electric locks, and door

• Dual-voltage output (12A/12VDC or 6A/24VDC) supports mixed legacy and modern lock hardware.
• 8 independent relay outputs distribute load across multiple lock lines without cross-interference.
• E2-rated enclosure allows indoor or semi-protected outdoor mounting in access control runs.

Lifesafety Power · FPO150-C8PD8PE2

Lifesafety Power FPO150-C8PD8PE2 Eight Door Access Control

150W, Class 2 power-limited supply designed to power eight independent door locks and eight auxiliary outputs in access control installations

• Powers eight independent door locks at up to 2.5A per output, no local supplies needed.
• Selectable 12V/24V DC output (12A or 6A) fits most multi-door access control architectures.
• Class 2 power-limited 150W design meets NEC requirements for access control wiring compliance.

Lifesafety Power · FPO150-C8PD8PE2M

Lifesafety Power FPO150-C8PD8PE2M FPO150-C8PD8PE2M

150W redundant power supply designed for mission-critical security deployments where input power loss cannot tolerate downtime

• Dual AC/DC inputs auto-switch on primary failure with no restart delay.
• 150W output bus distributes power across up to eight 12VDC or 24VDC loads.
• Integrated fault supervision signals input loss, brownout, or overload to the panel.

Lifesafety Power · FPO150-C8PD8PE6M1

Lifesafety Power FPO150-C8PD8PE6M1 150W Single Voltage 120 VAC 8

150W single voltage (120VAC input) power supply built for access control, door locks, auxiliary devices, and surveillance infrastructure requiring

• 8 relay lock outputs eliminate external relay modules in access control runs.
• 8 auxiliary outputs deliver dedicated circuits for REX, sensors, and accessories.
• 120VAC single-voltage input simplifies compliance with standard facility power.

Lifesafety Power · FPO150-C8PE1

Lifesafety Power FPO150-C8PE1 8 Lock Ouputs 12A/12V Or 6A/24PWR

150W cabinet-mounted power distribution unit designed to supply and supervise multiple electronic locks, door readers, and access control ancillaries

• Eight independently supervised 2.5A outputs cover standard strikes and mag-locks per zone.
• Selectable 12VDC/12A or 24VDC/6A lets you match voltage to lock hardware and cable run length.
• Class 2 power-limited design satisfies life safety code without additional current-limiting relays.

Lifesafety Power · FPO150-D8E1

Lifesafety Power FPO150-D8E1 150W Svps 8 Aux Out E1 Cabinet

150W supervised power supply housed in a compact E1 enclosure, designed to distribute and protect auxiliary 12VDC or 24VDC loads across multiple

• Eight independently fused 3A outputs prevent a single short from killing adjacent circuits.
• Field-selectable 12V or 24V output supports mixed-voltage loads from one unit.
• Supervised architecture reports faults directly to the panel, cutting troubleshooting time.

Lifesafety Power · FPO150-D8E2

Lifesafety Power FPO150-D8E2 FPO150-D8E2

150-watt regulated power supply designed for distributed security installations where multiple devices require independent, supervised power rails

• 150W regulated output supports multiple independent supervised power rails.
• Fits standard 19-inch rack or wall-mount for space-constrained deployments.
• Accepts 16–12 AWG wiring; compatible with Class 2/Class 3 security systems.

Lifesafety Power · FPO150-D8E4M1

Lifesafety Power FPO150-D8E4M1 FPO150-D8E4M1

Power distribution accessory from the Lifesafety Power product line, engineered for multi-output camera and access control deployments where

• Centralizes power distribution across multiple IP cameras and access control devices.
• Eliminates individual wall adapters, reducing cable runs and field wiring complexity.
• Battery backup support enables continuity during outages in commercial deployments.

Lifesafety Power · FPO150-D8PE1

Lifesafety Power FPO150-D8PE1 150W Svps 8 Aux Out E1 Cabinet

150W switched-mode power supply housed in an E1 enclosure, designed to distribute DC power to networked security equipment across distributed

• 150W switched-mode supply powers up to 8 Class 2-limited 2.5A outputs concurrently.
• Eliminates downstream distribution modules, reducing rack complexity and install labor.
• Fits standard 19-inch racks or wall-mount enclosures for scalable distributed deployments.

Lifesafety Power · FPO150-D8PE2M

Lifesafety Power FPO150-D8PE2M 4 Door

Four-door power distribution unit designed for access control and security system integration

• Centralizes power for four doors, reducing wiring runs and point-of-failure risk.
• Supervised outputs provide real-time fault alerts to the access control panel.
• Wall or DIN-rail mountable for flexible placement in equipment or server rooms.