Lifesafety Power FPO150-B100C8PD8PE4A 8-Output 150W Power Supply
Overview
The FPO150-B100C8PD8PE4A is a 150W Class 2 power supply purpose-built for AMAG-based access control and auxiliary device circuits. It delivers eight discrete outputs, each rated at 2.5A, plus dedicated 12V and 24V rails capable of 4A each — solving the power distribution challenge on multi-door AMAG deployments where you need isolated, protected channels to readers, strike plates, and auxiliary loads without daisy-chaining or undersizing the main feed.
Compatibility
This supply is engineered specifically for AMAG access control systems and compatible auxiliary output configurations. Verify your AMAG panel or integration spec sheet confirms FPO150-class power sourcing before installation — AMAG systems often specify discrete power distribution topologies that differ from standard UPS or generic multi-output designs.
Installation Notes
The FPO150-B100C8PD8PE4A ships in an E4 enclosure rated for mounting in a standard 19-inch or wall-mount rack environment. Each of the eight outputs is individually fused and current-limited at 2.5A — do not exceed per-channel limits or protection circuits will trip. The 12V and 24V rails support up to 4A each. Class 2 certification means this supply is suitable for low-voltage access control circuits; do not use for line-voltage or main power distribution. Ensure adequate ventilation around the enclosure — 150W dissipation at full load requires clear air space. Wire strain relief and conduit entry points follow standard enclosure conventions; refer to the mounted device layout before cutting conduit holes.
