Lifesafety Power FPO150-B100C8D8PE4M1 Power Supply Enclosure
Overview
The FPO150-B100C8D8PE4M1 is a 150W wall-mount power supply enclosure rated for dual 12V and 24V output, designed to feed distributed camera arrays, lock controllers, and access-control devices across commercial surveillance and security installations. The unit ships with an 8-channel mercury relay module (B100C8D8PE4M1) and fits in a compact footprint (24H × 20W × 4.5D inches), making it suitable for IT closets, junction boxes, and equipment racks where space and wire density demand dense, organized power distribution.
Compatibility
This enclosure works with 12V and 24V surveillance camera systems, access control panels requiring low-voltage switching, and security device networks that need coordinated relay-driven power switching. The 8-channel relay configuration supports simultaneous control of multiple 12V or 24V loads — typical for camera power feeds, lock strike circuits, and auxiliary sensor circuits in medium-scale multi-zone installations. Verify the voltage and current requirements of your specific camera line and controller before deployment; consult the device datasheet for PoE vs. direct 12/24V draw expectations.
Installation Notes
Mount the enclosure to a vertical DIN rail or directly to a wall surface via the provided mounting lugs. Ensure adequate ventilation around the unit to maintain thermal headroom during continuous 150W operation — do not enclose or stack without thermal analysis. Input power delivery must be sourced from a properly grounded circuit breaker or UPS output rated for 150W continuous load. All relay output terminals are field-wirable; follow your local electrical code and site wiring standards when connecting 12V and 24V camera feeds, door strikes, or lock circuits. The mercury relay module requires no ongoing maintenance but should be inspected annually for corrosion in humid environments (salt spray, condensation-prone areas).
What's in the Box
- 1× FPO150-B100C8D8PE4M1 power enclosure assembly
- 1× 8-channel mercury relay module (pre-installed)
- DIN rail mounting hardware and wall brackets
