Lifesafety Power FPO150-C8PD8PE2M Redundant Power Supply
Overview
The FPO150-C8PD8PE2M is a 150W redundant power supply designed for mission-critical security deployments where input power loss cannot tolerate downtime. Redundancy topology allows two independent AC or DC inputs to feed a single output bus, eliminating single points of failure in access control panels, NVRs, and distributed camera arrays. Deploy this where main and backup power circuits are available and battery supervision is required.
Compatibility
Integrates with Lifesafety Power control panels and any security system requiring supervised, redundant 12VDC or 24VDC power distribution. Confirm voltage and connector type against your panel's power input specifications before ordering.
Specifications
Input: Dual AC or DC inputs support cross-over operation — if primary input fails, secondary automatically supplies the load without manual switching or restart delay. Output: 150W total capacity at rated voltage; internal distribution supports up to eight 12VDC or 24VDC loads. Supervision: Integrated fault reporting detects input loss, brownout, or overload conditions and signals the control panel, enabling real-time alerting to operations. Battery Backup: Compatible with auxiliary battery modules (sold separately) to bridge power gaps during transfer events or extended outages. Form Factor: DIN-rail or wall-mount enclosure sized for cabinet integration alongside control electronics.
Installation Constraints
Verify both AC/DC input sources are available and wired to separate circuits before installation. Redundancy requires two independent feeds; single-input wiring disables redundant failover. Confirm load current does not exceed 150W at operating temperature. Consult system documentation for battery compatibility and supervision wiring requirements.
