Lifesafety Power FPO150-C4D8E1 150W Supervised Power Supply
Overview
The FPO150-C4D8E1 is a compact 150W supervised power supply engineered for small-to-mid-scale security installations where you need distributed power with individual circuit protection. The unit delivers either 12A at 12VDC or 6A at 24VDC — sufficient to run multiple IP cameras, door controllers, or access hardware simultaneously. The four independent auxiliary outputs, each fused at 3A, allow you to isolate loads and protect against cascading failures if a single downstream device shorts. This matters in warehouse or retail deployments where a faulty camera or lock solenoid shouldn't bring down your entire system.
Compatibility
The FPO150-C4D8E1 integrates with distributed power architectures supporting standard 12VDC and 24VDC peripheral devices — IP cameras rated for these voltages, electric strikes, magnetic locks, motion sensors, and auxiliary control circuits. Verify your specific device voltage and current draw against the 3A-per-output limit. The unit pairs well with networked video recorders that require localized power distribution at remote sensor locations.
Installation Notes
The E1 enclosure is cabinet-mount form factor. Confirm your installation space accommodates the unit dimensions and allows access to terminal blocks for field wiring. Each output is independently fused; use only 3A fuses rated for your operating voltage. Downstream wiring must match local electrical codes and the voltage class of your application.
When to Choose a Different Model
If you require higher aggregate current capacity (more than 150W total), a larger Lifesafety Power model in the same supervised supply family may be required. If your deployment calls for battery backup or UPS functionality, consider a different product category designed for emergency power systems.
