Lifesafety Power FPO150-B100C8PD8PE2 150W Dual Voltage Power Supply with 8-Lock Controller

Overview

The FPO150-B100C8PD8PE2 is a 150W distributed power supply designed for access control and security systems requiring multiple independent lock outputs. It provides simultaneous 12VDC and 24VDC rails in a single enclosure, eliminating the need for separate power supplies when mixed voltage devices are deployed. The E2 enclosure rating supports typical commercial security installations in non-hazardous environments.

Output Specifications

Eight supervised outputs deliver class 2 power-limited current at 2.5A maximum per output. The 12VDC rail supplies 4A total capacity; the 24VDC rail supplies 4A total capacity — meaning you can distribute lock actuation, access readers, and control circuits across eight independent channels without overloading any single power rail. This split-rail design prevents one misbehaving circuit from collapsing voltage to others, a critical requirement in access control systems where reader failure or solenoid stall can draw sustained current.

Compatibility

The FPO150-B100C8PD8PE2 integrates with access control power supplies and commercial access control panels from equipment manufacturers that support 12/24VDC distributed power architectures. Verify your access control system documentation for input voltage and supervised output requirements before installation.

Installation Context

Deploy this unit in electrical rooms, closets, or secure cabinet mounting scenarios where multiple locks and readers draw from a common power backbone. The independent outputs allow zone-based power management — power loss to one lock does not affect others. Class 2 rating limits fault-current hazards and eliminates the need for expensive Class 1 breakers in some jurisdictions.