Lifesafety Power FPO150-B100C8D8PE4X 150W Dual Voltage Power Supply
Overview
The FPO150-B100C8D8PE4X is a 150W power distribution unit designed for surveillance and access control systems requiring redundant power feeds and multiple relay outputs. Built as a 120 VAC input dual-voltage supply, it delivers the wattage needed to support multi-camera installations and door lock circuits simultaneously without overloading a single branch circuit. The eight relay lock outputs handle 12VDC solenoid releases and electronic locks; the eight auxiliary outputs provide 24VDC logic signaling to access control readers, door sensors, and auxiliary devices. Deploy this where you need centralized power conditioning, output isolation, and intelligent relay switching for a small-to-medium security perimeter.
Compatibility
The FPO150-B100C8D8PE4X integrates with Lifesafety Power control panels and legacy access control systems that require 24VDC auxiliary signaling and 12VDC solenoid switching. Verify input voltage availability (120 VAC single-phase) at the installation location and confirm that the total connected lock and sensor load does not exceed 150W output capacity. If your system uses modern ONVIF IP cameras with integrated PoE, this supply is not the right choice—route cameras to a managed PoE switch instead. This unit is purpose-built for hardwired access control and legacy systems that expect discrete relay outputs.
Installation Notes
Mount in a secure electrical enclosure rated for the total load. Verify 120 VAC branch circuit capacity before connection; 150W at 120VAC draws approximately 1.25A. Do not exceed relay contact ratings on lock outputs—verify solenoid resistance and inrush current with your door hardware manufacturer. All outputs are isolated from input power; use shielded twisted-pair cabling for relay signaling runs exceeding 50 feet to minimize noise coupling to nearby cameras or sensors.
