Lifesafety Power FPO150-C4PE1 4-Output Class 2 Power Supply

Overview

The FPO150-C4PE1 is a 150W class 2 power supply housed in an E1 enclosure, purpose-built for access control and lock management in commercial security systems. It delivers four independent 2.5A outputs at either 12V or 24V, with a total capacity of 12A at 12V or 6A at 24V — enough to drive multiple electromagnetic locks, door strikes, or mag locks in small-to-medium installations without requiring separate power runs to each device. This density matters: one supply, one UPS integration point, one management footprint.

Compatibility

The FPO150-C4PE1 integrates with any access control panel or security system that requires class 2 power delivery for electromagnetic locking hardware. It is compatible with standard magnetic locks rated for 12V or 24V DC operation, electric strikes, and door position sensors commonly deployed in commercial buildings, warehouses, and data centers. Verify your lock specifications against the 2.5A per-output limit — high-inrush locks may require soft-start modules or sequential output assignment to avoid nuisance breakers.

Installation Notes

Wire the FPO150-C4PE1 to your access control panel's power output terminals using appropriate gauge conductors for the 12A or 6A total draw. Observe polarity and use strain relief at all entry points. The E1 enclosure is designed for cabinet or wall-mount installation in controlled environments — not for direct outdoor exposure or wet locations. Ensure adequate ventilation around the unit to prevent thermal stress, particularly if running sustained near full load (150W continuous).