Network Video Recorders (NVRs)
Sub categories
Showing Results for Network Video Recorders (NVRs)
-
i-PRO
SKU: WJND400/4000T4
i-PRO WJND400/4000T4 64-Channel H.264 NVR
- Handles 64 simultaneous camera inputs with per-stream bandwidth from 32 kbps to 10 Mbps.
- Rack-mount form factor fits standard 19-inch enclosures for SOC and data center deployment.
- D-sub25pin interface integrates legacy PTZ and dome controls without proprietary adapters.
$11,611.00 $9,125.99 Save $2,485.01The item has been added -
i-PRO
SKU: NVR-T-1-MWS-V2
I-pro WT1-B Single Intel 9TH GEN HEX Core CPU - NVR-T-1-MWS-V2
- 9th Gen Intel Hex Core module upgrades WT1-B processing without replacing the chassis.
- Resolves CPU ceiling issues under concurrent playback, analytics, and export workloads.
- Field-replaceable, tool-friendly install — no cabling or factory reset required.
$2,695.00 $2,117.99 Save $577.01The item has been added -
Kantech
SKU: ADVER30R5H3G
Kantech VideoEdge 3U Hybrid 32-Channel 30TB NVR
32-channel hybrid NVR with 30TB RAID storage in 3U rackmount
- 3U hybrid NVR runs 32 analog + 32 IP channels at once
- 30TB storage onboard for medium-large surveillance sites
- Rack-mount with RS-232 and IP/Ethernet for VMS integration
$30,982.00 $19,939.99 Save $11,042.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: AC-CABLE-18-BOXED-SET-OF-2
Lifesafety Power AC-Cable-18-Boxed-Set-Of-2 AC Cable Harness
- 18-inch length routes cleanly to FPO series AC input without extension cables or splices.
- Two-pack per box lets you stage a spare on-site, avoiding service delays on second deployments.
- Connector pinout matches FPO series units at 120 VAC, ensuring rated compatibility at installation.
$30.00 $29.99 Save $0.01The item has been added -
Lifesafety Power
SKU: BX50-E5
Lifesafety Power BX50-E5 Standard Power Systems 50W Single Voltag
- 50W PoE budget supports 8–12 typical IP cameras (4–6W each) from a single unit.
- 802.3af/at PoE over Cat5e or better eliminates separate DC cable runs to edge devices.
- Compact form factor fits wall-mount cabinets and cramped electrical closets cleanly.
$332.00 $218.99 Save $113.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: C8P-BOXED
Lifesafety Power C8P-BOXED C8P-BOXED
- 8 independent 24VDC outputs consolidate backup power for cameras, readers, and sensors.
- Integrated battery backup keeps critical security devices online during AC mains loss.
- Boxed enclosure fits rack and wall-mount installs, reducing cabinet footprint and cable sprawl.
$113.00 $74.99 Save $38.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: D8-BOXED
Lifesafety Power D8-BOXED D8-Boxed 8 outputs fused at 3A each
- 8 independently fused 3A outputs prevent a single device fault from killing the entire system.
- Centralized boxed form factor consolidates power distribution into one enclosure-mounted unit.
- Supports up to 24A total capacity across mixed security devices from a single regulated source.
$51.00 $50.99 Save $0.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: D8P-BOXED
Lifesafety Power D8P-BOXED D8P-BOXED
- Pre-assembled boxed enclosure eliminates field assembly and reduces wiring errors.
- Centralizes power feeds for cameras, access control, and auxiliary devices from one unit.
- Compact footprint fits space-constrained telecom cabinets, closets, and equipment racks.
$51.00 $33.99 Save $17.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: E2-BS1
Lifesafety Power E2-BS1 E2 enclosure with one battery shelf
- Modular shelf mounts inside E2 enclosures, eliminating external UPS units.
- Connects directly to the E2 internal power bus, backing up all downstream devices.
- Single-shelf form factor suits small-to-mid-scale access control and surveillance sites.
$320.00 $210.99 Save $109.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: E5M-BOXED
Lifesafety Power E5M-BOXED LABEL Unified Power Sol.LABEL Unifie
- Consolidates 12VDC power distribution from a single enclosure, reducing wiring complexity.
- Delivers 8.5W output to cameras, readers, and auxiliary devices in one chassis.
- Enclosure form factor mounts in equipment racks near primary power entry points.
$120.00 $119.99 Save $0.01The item has been added -
Lifesafety Power
SKU: FPV4-E1
Lifesafety Power FPV4-E1 4A Ps/Enclosure
- 4A continuous output supports small-to-mid-scale IP camera or access control loads.
- 24VAC input aligns with standard security infrastructure transformers and panels.
- Single-enclosure distribution reduces wiring overhead and simplifies fault isolation.
$296.00 $194.99 Save $101.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: RBE-BOXED
Lifesafety Power RBE-BOXED Rackmount Battery Enclosure 12VDC 8 Am
- Holds four 12VDC 8A batteries, centralizing backup power in a single rack chassis.
- Independent per-slot management allows battery replacement without taking the system offline.
- 19-inch rackmount form factor consolidates distributed battery storage, reducing cabling runs.
$557.00 $365.99 Save $191.01The item has been added -
Lifesafety Power
SKU: RD150-16/E
Lifesafety Power RD150-16/E 220VAC input Rackmount 150W pwr supp
- Switchable 12V/24V output powers mixed legacy and modern devices from one supply.
- 16 independently fused outputs isolate zone faults without dropping remaining circuits.
- 2U rackmount form factor integrates into standard 19-inch racks alongside network gear.
$799.00 $524.99 Save $274.01The item has been added -
Lifesafety Power
SKU: RD150/250
Lifesafety Power RD150/250 Rack Mount DC dual voltage
- Dual-rail output delivers 12V @ 12A and 24V @ 6A for mixed-voltage deployments.
- Rack-mount form factor consolidates power distribution and reduces cabinet clutter.
- Both rails operate simultaneously, supporting up to 144W per rail concurrently.
$1,136.00 $746.99 Save $389.01The item has been added -
Lifesafety Power
SKU: SD4P-BOXED
Lifesafety Power SD4P-BOXED FLEXPOWER SD4 SD16 Smart Distributio
- Device-level supervision detects circuit faults instantly, eliminating manual polling.
- Integrates natively with SD4 and SD16 platforms for staged, no-stranded-asset expansion.
- Ships pre-configured for immediate rack or wall mount, reducing on-site deployment time.
$158.00 $103.99 Save $54.01The item has been added -
Add to Cart The item has been addedNETGEAR
SKU: GS724T-600NAS
NETGEAR GS724T-600NAS 24PT GE Smart Switch
- All 24 Gigabit ports run simultaneously at full line rate on a 52 Gbps non-blocking fabric.
- 256 VLANs and IGMP snooping isolate camera, access control, and IT traffic on one switch.
- Two SFP uplink slots support fiber backbone links without consuming edge Gigabit ports.
$398.26 $233.99 Save $164.27The item has been added
Network Video Recorders (NVRs)
Network Video Recorders (NVRs) provide centralized recording and management for IP surveillance systems. Select an NVR based on camera count, resolution requirements, retention targets, and long-term storage scalability to ensure reliable commercial deployments.
Plan Your Deployment
- Camera count and resolution requirements
- Retention period and storage capacity planning
- Throughput and recording bandwidth limits
- RAID configuration and redundancy strategy
- Remote access and VMS integration needs
Network Video Recorders (NVRs) — Engineering-Grade Video Recording & Storage for Commercial Deployments
This category covers 988 working models of network video recorders (nvrs) sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Channel count and supported resolution define the recorder's ceiling. A 16-channel NVR rated for 8MP per channel is a different product from a 16-channel rated for 2MP — the latter throttles your future camera upgrades. Read the per-channel and aggregate bitrate ceilings (often expressed in Mbps incoming/outgoing). A safe rule: target an NVR with at least 50% headroom on bitrate, and channel count one step above current need.
Storage architecture matters as much as raw capacity. Surveillance-grade drives (WD Purple, Seagate SkyHawk) are tuned for 24/7 write loads and a small concurrent read count; desktop drives fail in months under the same workload. RAID levels affect both fault tolerance and write performance — RAID 5 for general retention with one drive of redundancy, RAID 6 or 10 for larger arrays where two-drive failure isn't recoverable in RAID 5.
VMS choice locks you into a vendor ecosystem more than any camera decision will. Genetec, Milestone, Hanwha Wisenet WAVE, Avigilon, and Axis Camera Station differ on per-camera licensing cost, third-party integrations (access control, video analytics, identity), and analyst workflow. Demo the operator interface with the people who will actually use it before committing — analyst frustration drives more replacements than technical limits.
Plan for off-site or redundant storage. Single-site recorders fail or get stolen. Cloud-archive licensing, NAS replication, and multi-site federation become important the moment a chain customer asks for centralized investigation tools. Recorders that bury cloud-archive in a per-camera SaaS bundle drive long-term costs much higher than a one-time NAS expansion.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 20MP+, 8MP, 12MP, 2MP, 5MP, 4MP, 16MP, 6MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired, Wi-Fi |
| Power | PoE, PoE+, AC/DC, PoE++, Battery |
| Channels | 16, 32, 8, 64, 4, 12, 24, 28 |
| Storage | microSD, HDD |
Top Brands in This Category
Frequently Asked Questions
How many drives can fit in a typical NVR?
Compact desktop NVRs hold 1-2 drives — typically capping around 16TB usable. Mid-size rack-mount NVRs hold 4-8 drives, often 32-64TB usable in RAID 5/6. Enterprise NVRs and dedicated storage servers scale to 16+ drives with hot-swap and JBOD expansion. Match drive count to your retention math; running out of drive bays mid-project means a recorder replacement, not just a drive add.
Should I use surveillance-grade or enterprise drives?
Surveillance-grade drives (WD Purple, Seagate SkyHawk) are correct for most NVRs — they're tuned for many concurrent write streams from cameras with low read count. Enterprise drives (WD Gold, Seagate IronWolf Pro, Exos) are appropriate for high-channel-count systems with many concurrent investigator clients reading recorded video. Avoid desktop drives entirely; they're rated for 8x5 light duty and fail quickly in 24/7 NVR loads.
What's the difference between an NVR and a hybrid recorder?
An NVR records exclusively from IP cameras over Ethernet. A hybrid (or tribrid) recorder accepts both IP cameras and legacy analog/HD-over-coax cameras on dedicated BNC inputs, useful for migrations where you can't replace coax runs immediately. Hybrid units cost more per channel and add complexity; if you're starting fresh or fully replacing analog, a pure NVR is simpler and almost always cheaper per usable channel.
Can I expand storage on an existing NVR?
Most rack NVRs and storage servers accept storage expansion via empty drive bays, eSATA/SAS JBOD shelves, or iSCSI targets. Desktop NVRs with only 1-2 bays generally do not. Before buying, check the recorder's supported expansion architecture and the maximum raw and usable capacity — many sub-$2,000 NVRs cap below the 24TB threshold most projects need within three years.
Do I need a dedicated VMS workstation?
For a few cameras and one or two simultaneous operators, the NVR's built-in client interface is enough. For 32+ cameras, multiple investigator seats, video walls, or wall-of-monitors operations, a dedicated workstation (or thin client) running the VMS client is standard. The workstation needs adequate GPU decode capacity for the simultaneous stream count — H.265 decode acceleration is essential at scale.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.
Build a Complete System
Most network video recorders (nvrs) installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.
