i-PRO · WJND400/4000T4

i-PRO WJND400/4000T4 64-Channel H.264 NVR

64-channel network video recorder built for large-scale surveillance operations requiring centralized video management and efficient H.264 compression

• Handles 64 simultaneous camera inputs with per-stream bandwidth from 32 kbps to 10 Mbps.
• Rack-mount form factor fits standard 19-inch enclosures for SOC and data center deployment.
• D-sub25pin interface integrates legacy PTZ and dome controls without proprietary adapters.

i-PRO · NVR-T-1-MWS-V2

I-pro WT1-B Single Intel 9TH GEN HEX Core CPU - NVR-T-1-MWS-V2

Replacement or upgrade CPU module for i-PRO WT1-B network video recorder chassis

• 9th Gen Intel Hex Core module upgrades WT1-B processing without replacing the chassis.
• Resolves CPU ceiling issues under concurrent playback, analytics, and export workloads.
• Field-replaceable, tool-friendly install — no cabling or factory reset required.

Kantech · ADVER30R5H3G

Kantech VideoEdge 3U Hybrid 32-Channel 30TB NVR

32-channel hybrid NVR with 30TB RAID storage in 3U rackmount

• 3U hybrid NVR runs 32 analog + 32 IP channels at once
• 30TB storage onboard for medium-large surveillance sites
• Rack-mount with RS-232 and IP/Ethernet for VMS integration

Lifesafety Power · AC-CABLE-18-BOXED-SET-OF-2

Lifesafety Power AC-Cable-18-Boxed-Set-Of-2 AC Cable Harness

N 18-inch AC power cable harness sold as a matched pair, designed specifically for Lifesafety Power FPO series power supplies

• 18-inch length routes cleanly to FPO series AC input without extension cables or splices.
• Two-pack per box lets you stage a spare on-site, avoiding service delays on second deployments.
• Connector pinout matches FPO series units at 120 VAC, ensuring rated compatibility at installation.

Lifesafety Power · BX50-E5

Lifesafety Power BX50-E5 Standard Power Systems 50W Single Voltag

Compact 50W single-voltage PoE power supply designed to centralize power distribution for small- to mid-scale IP security installations

• 50W PoE budget supports 8–12 typical IP cameras (4–6W each) from a single unit.
• 802.3af/at PoE over Cat5e or better eliminates separate DC cable runs to edge devices.
• Compact form factor fits wall-mount cabinets and cramped electrical closets cleanly.

Lifesafety Power · C8P-BOXED

Lifesafety Power C8P-BOXED C8P-BOXED

Compact boxed power supply and battery backup module designed for multi-camera and access control deployments requiring power continuity during mains

• 8 independent 24VDC outputs consolidate backup power for cameras, readers, and sensors.
• Integrated battery backup keeps critical security devices online during AC mains loss.
• Boxed enclosure fits rack and wall-mount installs, reducing cabinet footprint and cable sprawl.

Lifesafety Power · D8-BOXED

Lifesafety Power D8-BOXED D8-Boxed 8 outputs fused at 3A each

Centralized power distribution unit designed for security and access control installations where multiple devices draw power from a single regulated

• 8 independently fused 3A outputs prevent a single device fault from killing the entire system.
• Centralized boxed form factor consolidates power distribution into one enclosure-mounted unit.
• Supports up to 24A total capacity across mixed security devices from a single regulated source.

Lifesafety Power · D8P-BOXED

Lifesafety Power D8P-BOXED D8P-BOXED

Compact boxed power distribution enclosure designed for security integrators deploying centralized power management across IP camera networks, access

• Pre-assembled boxed enclosure eliminates field assembly and reduces wiring errors.
• Centralizes power feeds for cameras, access control, and auxiliary devices from one unit.
• Compact footprint fits space-constrained telecom cabinets, closets, and equipment racks.

Lifesafety Power · E2-BS1

Lifesafety Power E2-BS1 E2 enclosure with one battery shelf

Single battery shelf module engineered to expand backup power capacity within the E2 enclosure line

• Modular shelf mounts inside E2 enclosures, eliminating external UPS units.
• Connects directly to the E2 internal power bus, backing up all downstream devices.
• Single-shelf form factor suits small-to-mid-scale access control and surveillance sites.

Lifesafety Power · E5M-BOXED

Lifesafety Power E5M-BOXED LABEL Unified Power Sol.LABEL Unifie

Unified power distribution and management solution designed for small to mid-scale security installations requiring consolidated power delivery

• Consolidates 12VDC power distribution from a single enclosure, reducing wiring complexity.
• Delivers 8.5W output to cameras, readers, and auxiliary devices in one chassis.
• Enclosure form factor mounts in equipment racks near primary power entry points.

Lifesafety Power · FPV4-E1

Lifesafety Power FPV4-E1 4A Ps/Enclosure

4-ampere power supply enclosure engineered for centralized power distribution in IP camera and access control deployments

• 4A continuous output supports small-to-mid-scale IP camera or access control loads.
• 24VAC input aligns with standard security infrastructure transformers and panels.
• Single-enclosure distribution reduces wiring overhead and simplifies fault isolation.

Lifesafety Power · RBE-BOXED

Lifesafety Power RBE-BOXED Rackmount Battery Enclosure 12VDC 8 Am

Rackmount battery enclosure designed to consolidate backup power capacity for distributed security and life-safety systems

• Holds four 12VDC 8A batteries, centralizing backup power in a single rack chassis.
• Independent per-slot management allows battery replacement without taking the system offline.
• 19-inch rackmount form factor consolidates distributed battery storage, reducing cabling runs.

Lifesafety Power · RD150-16/E

Lifesafety Power RD150-16/E 220VAC input Rackmount 150W pwr supp

Supervised rackmount power distribution enclosure designed for small-to-medium security and access control installations where centralized power

• Switchable 12V/24V output powers mixed legacy and modern devices from one supply.
• 16 independently fused outputs isolate zone faults without dropping remaining circuits.
• 2U rackmount form factor integrates into standard 19-inch racks alongside network gear.

Lifesafety Power · RD150/250

Lifesafety Power RD150/250 Rack Mount DC dual voltage

Rack-mounted DC power distribution unit configured for dual-voltage output: 12V at 12A and 24V at 6A

• Dual-rail output delivers 12V @ 12A and 24V @ 6A for mixed-voltage deployments.
• Rack-mount form factor consolidates power distribution and reduces cabinet clutter.
• Both rails operate simultaneously, supporting up to 144W per rail concurrently.

Lifesafety Power · SD4P-BOXED

Lifesafety Power SD4P-BOXED FLEXPOWER SD4 SD16 Smart Distributio

Smart power distribution module designed for centralized management of multiple security and access control circuits in integrated installations

• Device-level supervision detects circuit faults instantly, eliminating manual polling.
• Integrates natively with SD4 and SD16 platforms for staged, no-stranded-asset expansion.
• Ships pre-configured for immediate rack or wall mount, reducing on-site deployment time.

NETGEAR · GS724T-600NAS

NETGEAR GS724T-600NAS 24PT GE Smart Switch

24-port Gigabit smart switch designed for converged IP security deployments where surveillance cameras, access control systems, and IT infrastructure

• All 24 Gigabit ports run simultaneously at full line rate on a 52 Gbps non-blocking fabric.
• 256 VLANs and IGMP snooping isolate camera, access control, and IT traffic on one switch.
• Two SFP uplink slots support fiber backbone links without consuming edge Gigabit ports.

NETGEAR · MS308E-100NAS

Netgear MS308E-100NAS 8PT Multigig Plus Switch

N unmanaged MultiGig Plus switch designed for IP security and edge-networked device deployments where plug-and-play operation and multi-gigabit

• Eight PoE++ (802.3bt) ports deliver up to 90W each for high-draw cameras and PTZ heads.
• MultiGig speeds (2.5G/5G/10G) let legacy 1G and modern endpoints share one unmanaged switch.
• Zero-configuration deployment with hardware bandwidth management suits lean-IT edge sites.

Pelco · VXS2B-R0-N

Pelco VXS2B-R0-N 100-Channel NVR Video Recorder

100-channel NVR with configurable RAID storage and Windows Server 2019

• HDD/SSD agnostic design lets you choose drive type and RAID topology at deployment
• 32GB memory, enterprise SATA/SAS drive support for large-scale recording operations
• NDAA Section 889 compliant for federal and regulated security installations

Pelco · VXS2C-E216-N12S

Pelco VXS2C-E216-N12S 216TB SAS NVR

216TB SAS NVR for 100-channel enterprise surveillance

• 216TB SAS storage with high sequential write for dense multi-camera recording
• 100 VideoXpert license channels on Dell PowerEdge R760XD2 with Intel processors
• Redundant power supplies and Windows Server 2019 for 24/7 mission-critical ops

Pelco · VXS2C-E288-N16S

Pelco VXS2C-E288-N16S 288TB SAS NVR Server

288TB SAS enterprise NVR with 100-channel VideoXpert license

• 288TB SAS storage for continuous high-throughput recording across dense deployments
• Dell PowerEdge R760XD2 chassis with Intel E5 processor and 64GB memory
• Redundant power supplies and Windows Server 2019 for IT infrastructure integration

Posiflex · 21972060129

Posiflex 21972060129 Adapter Power 12V 60W Ks/Xt L5+l V2

Dedicated 60W, 12-volt power supply engineered for Posiflex KS and XT series terminals, specifically the L5+L V2 form factor

• OEM 12V/60W rail sustains full terminal load including printers and scanners.
• Purpose-built connector pinout eliminates intermittent faults from mismatched adapters.
• Stable voltage regulation protects NVRAM and prevents transaction log corruption.

QNAP · VS-12156U-RP-PRO+-US

QNAP 12-BAY 2U NVR 56-CH Surveillance - VS-12156U-RP-PRO+-US

QNAP · TVR-AI200-16CH-16P-US

QNAP 16-Channel Poe+ Network Smart NVR - TVR-AI200-16CH-16P-US

Network video recorder purpose-built for small-to-mid commercial surveillance deployments where you need to power and record up to 16 IP cameras from

QNAP · QVP-21C-US

QNAP 2 BAY NVR 8CH (max Channels 16) VMS Built-in - QVP-21C-US

Tower-form-factor network surveillance server built around an Intel Celeron J6412 quad-core processor running QVR Pro OS — QNAP's purpose-built video

QNAP · TRAY-25-BLK01

QNAP 2.5 HDD Tray With Key Lock And Two Keys - TRAY-25-BLK01

2.5-inch hard drive tray designed for compatible QNAP NAS enclosures , providing a secure, keyed-lock mechanism that prevents unauthorized drive

QNAP · QDA-A2MAR

QNAP 2.5 SATA TO Dual M.2 2280 SATA Drive AD - QDA-A2MAR

Drive adapter that converts a single 2.5" SATA bay into two M.2 2280 SATA slots, letting you populate otherwise unused bays in compatible QNAP NAS

QNAP · TRAY-25-BLK02

QNAP 2.5 SSD Tray With Key Lock And Two Keys - TRAY-25-BLK02

2.5" drive tray designed for compatible QNAP NAS enclosures , adding a keyed lock mechanism that prevents unauthorized drive removal — a practical

QNAP · TRAY-25-BLK03

QNAP 2.5 SSD Tray With Key Lock And Two Keys - TRAY-25-BLK03

2.5" SSD drive tray designed for compatible QNAP NAS enclosures that require a keyed locking mechanism to prevent unauthorized drive removal

QNAP · TRAY-25-NK-BLK04

QNAP 2.5 Tray For 24 Bay Es Nas - TRAY-25-NK-BLK04

2.5" U.2 drive tray from QNAP, purpose-built to seat U.2 NVMe SSDs into the QNAP storage ecosystem

QNAP · TRAY-25-NK-BLK03

QNAP 2.5 Tray Module For Tray-35-Nk-BLK05 - TRAY-25-NK-BLK03

2.5-inch drive tray module designed to adapt smaller 2.5" SSDs or hard drives for installation in compatible QNAP NAS enclosures

QNAP · SP-SS-TRAY-BLACK

QNAP 25HDD Tray For Ss-Tower Nas Series - SP-SS-TRAY-BLACK

Factory-new, genuine black drive tray designed specifically for QNAP SS-Tower NAS enclosures that accept 2.5-inch drives

QNAP · TRAY-35-WHT01

QNAP 3.5 HDD Tray With Key Lock - TRAY-35-WHT01

White 3.5" hard drive tray with an integrated key lock designed for QNAP NAS enclosures that use tool-less, hot-swap drive bays

QNAP · TRAY-35-BLK01

QNAP 3.5 HDD Tray With Key Lock And Two Keys - TRAY-35-BLK01

Replacement or spare 3.5" hard drive tray designed for compatible QNAP NAS enclosures

QNAP · TRAY-35-BLK02

QNAP 3.5 HDD Tray With Key Lock And Two Keys - TRAY-35-BLK02

Replacement or spare HDD tray for compatible QNAP NAS enclosures and expansion units

QNAP · QDA-A2AR

QNAP 3.5 SATA TO Dual 2.5 SATA Drive Adapte - QDA-A2AR

Passive drive bay adapter that lets you install two 2.5-inch SATA 6Gbps drives — HDDs or SSDs — into a single 3.5-inch SATA drive bay

QNAP · QDA-SA3-4PCS

QNAP 6 GBPS 2.5-Inch Sas To SATA Drive Adapte - QDA-SA3-4PCS

Four-pack of 6 Gbps SAS-to-SATA drive adapters from QNAP, designed to let standard 2.5-inch SATA SSDs or hard drives occupy SAS drive bays in