Transition Networks

Transition Networks · OCA-1BB100-NA

Transition Networks OCA-1BB100-NA 10-Port Managed Switch

10-port managed switch cabinet for outdoor telecom and security networks

• 10 Gigabit ports deliver full-duplex backbone capacity for distributed security sites.
• Sealed outdoor cabinet eliminates secondary sheltering for pole or field deployment.
• VLAN, port mirroring, and STP isolate camera, access-control, and management traffic.

Transition Networks · N-GXE-POE-LC-01

Transition Networks N-GXE-POE-LC-01 Gigabit PoE+ Converter

Gigabit PoE+ media converter with 100m multimode fiber reach

• Passes up to 30W PoE+ over fiber, powering cameras or readers without local PSUs.
• Extends gigabit copper-to-multimode fiber links up to 100m, eliminating EMI on long runs.
• DIN rail mount and lifetime warranty simplify cabinet integration and long-term support.

Transition Networks · M/GE-ISW-LC-01

Transition Networks M/GE-ISW-LC-01 Gigabit Media Converter

Managed Gigabit media converter for copper-to-fiber with DIN-rail mount

• Managed Gigabit conversion bridges copper and single-mode fiber at full 1 Gbps.
• DIN-rail mount enables clean panel integration in control cabinets and network frames.
• Industrial-rated operating temperature sustains reliable links in harsh environments.

Transition Networks · M/GE-ISW-SFP-01

Transition Networks M/GE-ISW-SFP-01 Gigabit Media Converter

Gigabit copper-to-fiber converter with DIN rail mount for outdoor industrial networks

• Converts copper RJ-45 to single-mode fiber SFP at full 1 Gbps throughput.
• Rated -40°C to 75°C for reliable deployment in outdoor and industrial enclosures.
• DIN rail mount simplifies installation in control panels with only 1.8 W draw.

Transition Networks · M/E-PSW-FX-02-NA

Transition Networks M/E-PSW-FX-02-NA Media Converter

Single mode fiber media converter for 10/100 Mbps copper-to-fiber extends reach

• Converts 10/100 Mbps copper to single mode fiber, extending links beyond 20 km.
• DIN rail mount fits directly in control enclosures—no extra shelving required.
• Lifetime warranty backs industrial-grade reliability for remote and field sites.

Transition Networks · LSS2200-8P

Transition Networks LSS2200-8P 8-Port Managed PoE++ Switch

8-port PoE++ managed switch with 90W per port for security cameras

• All 8 RJ45 ports deliver 802.3bt PoE++ up to 90W each, powering PTZ cameras and readers.
• 720W total PoE budget supports a full 8-port load without external injectors or splitters.
• DIN rail mount and managed Layer 2/3 switching simplify VLAN and QoS config at the edge.

Transition Networks · ION106-A-NA

Transition Networks ION106-A-NA 6-Slot Modular Chassis

6-slot 10G fiber chassis for unmanaged backbone networks

• Six swappable line card slots let you match exact port counts and fiber types per site.
• Supports up to 24 single-mode fiber ports at 10 Gbps for high-density camera backbones.
• Unmanaged design with rack and DIN rail mounting cuts provisioning time in any control room.

Transition Networks · EO2PSE4052-111

Transition Networks EO2PSE4052-111 32-Port PoE+ Fiber Switch

32-port Gigabit PoE+ switch with single-mode fiber uplink, DIN-rail mount

• All 32 Gigabit ports deliver IEEE 802.3at PoE+, eliminating external PSUs at remote sites.
• Single-mode fiber uplink supports runs beyond 10 km, bridging buildings without copper.
• Unmanaged, DIN-rail design deploys in minutes—no config needed, fits 19-inch panels.

Transition Networks · EO2PD4052-111

Transition Networks EO2PD4052-111 Gigabit PoE+ Fiber Converter

32-port Gigabit PoE+ fiber converter for long-distance remote deployments

• 32-port density consolidates Gigabit fiber runs to a single DIN rail module.
• Single-mode fiber backhaul extends data and PoE+ power beyond 10 km unrepeated.
• 30W PoE+ per port powers remote cameras and access readers over the fiber link.

Transition Networks · E-100BTX-FX-06-NA

Transition Networks E-100BTX-FX-06-NA Media Converter

Copper-to-fiber converter extends Ethernet 12.4 miles over multimode fiber

• Extends Ethernet up to 12.4 miles over multimode fiber, eliminating copper distance limits.
• Bridges 100Base-TX copper (RJ-45) to 100Base-FX fiber with 100 Mbps throughput.
• TAA compliant with a lifetime warranty, supporting federal procurement and long-term deployments.

Transition Networks · E-100BTX-FX-06(LC)-NA

Transition Networks E-100BTX-FX-06(LC)-NA 100Base-TX TO Fiber

Copper-to-fiber media converter for 100 Mbps network extension

• Converts 100Base-TX RJ-45 to LC fiber, extending runs well beyond the 100m copper limit.
• DIN-rail mount fits panel enclosures and utility cabinets; no rack space required.
• Included stand-alone PSU enables independent deployment without PoE or bus power dependency.

Transition Networks · E-100BTX-FX-05(SCHT)-NA

Transition Networks E-100BTX-FX-05(SCHT)-NA Media Converter

Copper-to-fiber media converter extends 100Mbps networks up to 2 km

• Extends 100Mbps copper links to 2 km over multimode fiber without repeaters.
• Full-duplex operation delivers simultaneous 100Mbps TX/RX — no throughput loss.
• DIN-rail mount fits directly into telecom and industrial control cabinets.

Transition Networks · C4110-4848

Transition Networks C4110-4848 10Gig Media Converter Card

32-port 10G single-mode fiber media converter card, plug-and-play

• 32 single-mode fiber ports deliver 10G throughput for high-density backbone links.
• Unmanaged plug-and-play design eliminates configuration time during deployment.
• Multi-protocol support (1GbE–10GbE, SONET) preserves compatibility with legacy gear.

Transition Networks · 25160

Transition Networks 25160 PS 48VDC 10A DIN Rail Managed Switch

10-port managed switch, 48VDC 10A, DIN rail mount for field networks

• 10 managed Gigabit ports support VLAN isolation and remote port control without site visits.
• Accepts 48VDC 10A or universal AC (90–264V, 47–63 Hz) — no extra power conversion needed.
• 35mm DIN rail mount fits standard electrical enclosures; lifetime warranty backs field deployments.

Transition Networks · 25148-NA

Transition Networks 25148-NA 90W 48V Power Adapter Level 6

90W 48V power adapter for Transition Networks Gigabit switches

• Delivers 90W at 48V DC for reliable power to Gigabit switch deployments.
• Keyed Level 6 connector prevents reverse-polarity errors during field installation.
• Compatible with Transition Networks 24- and 48-port unmanaged Gigabit switches.

Transition Networks · 25105

Transition Networks 25105 120W DIN Rail Power Supply

48VDC 120W DIN rail supply for network & security infrastructure

• Delivers stable 48VDC @ 2.5A output for switches, IP cameras, and access control nodes.
• Universal 88–264V / 47–63 Hz AC input supports North American and international deployments.
• DIN rail mount integrates into standard enclosures, eliminating bench-top power bricks.

Transition Networks · 25104

Transition Networks 25104 48VDC 5A DIN Rail Power Supply

48VDC 5A DIN rail supply for distributed network and PoE infrastructure

• Delivers 48VDC at 5A (240W) to power PoE injectors or access point clusters.
• Accepts 85–264VAC at 47–63 Hz, supporting single-SKU sparing across global sites.
• DIN rail mount fits standard electrical enclosures; lifetime warranty backs field installs.

Transition Networks · SBFTF1039-105-BR

Transition Networks 10/100BTX TO 100BFX MM LC 2KM With -br Power Supply - SBFTF1039-105-BR

Transition Networks · M/GE-T-SX-01-NA

Transition Networks Mini 1000BASET TO 1000BASESX SC MM 220/550M 3.3V - NA - M/GE-T-SX-01-NA

Transition Networks · M/GE-T-SFP-01-NA

Transition Networks Mini 1000BASET TO 1000BASEX SFP W/na - M/GE-T-SFP-01-NA