Power & UPS
Sub categories
Power Supplies
1027 items
PoE Injectors & Midspans
395 items
Power Delivery & Supplies
1639 items
Surge Protectors
12 items
UPS & Power Management
47 items
Showing Results for Power & UPS
-
Altronix
SKU: VERTILINE16D
Altronix VERTILINE16D 16-Output 10A 24/28VAC Supply
16-output 24/28VAC rack supply, 10A per channel, independent fusing
- 16 independently fused 10A outputs prevent a single fault from cascading across zones.
- 24/28VAC output directly powers mag locks, strikes, and readers without conversion.
- 115VAC input and 19-inch rack mount integrate cleanly into standard NA cabinets.
$955.38 $577.99 Save $377.39The item has been added -
Altronix
SKU: VERTILINE16DI
Altronix VERTILINE16DI Rack Mount Power Supply 16 PTCprotected
16-output 24VAC rack mount supply with individual PTC protection
- 16 individually PTC-protected outputs prevent a single fault from taking down the entire system.
- Regulated 24/28VAC at up to 16A per channel supports locks, readers, and cameras simultaneously.
- Rack-mount form factor simplifies centralized power distribution in standard equipment enclosures.
$1,426.16 $765.99 Save $660.17The item has been added -
Altronix
SKU: VERTILINE33D
Altronix VERTILINE33D 16-Output 12VDC Rack Supply
16-output 12VDC rack supply for centralized security system power
- 16 independent 12VDC output terminals let you isolate circuits per device.
- 8A @ 12VDC total capacity supports dense multi-camera or access control loads.
- Rack-mount form factor with 115VAC input fits standard security enclosures.
$815.64 $438.99 Save $376.65The item has been added -
Altronix
SKU: VERTILINE33TD
Altronix VERTILINE33TD 16-Output 12VDC Rackmount Supply
16-channel 12VDC rackmount supply, 16A per output, 1U form factor
- 16 independent 12VDC channels prevent single-fault cascade across access control loads.
- Each output delivers up to 16A, supporting high-drain readers, locks, and sensors.
- 1U rackmount chassis consolidates power distribution and simplifies rack-level troubleshooting.
$1,019.86 $544.99 Save $474.87The item has been added -
Altronix
SKU: VERTILINE33TDV
Altronix VERTILINE33TDV 8-Output 12VDC Rack Power Supply
8-output 12VDC rack supply for distributed security power
- Eight independent 12VDC outputs at 8A each support up to 8 separate devices.
- 19-inch rack-mount form factor integrates cleanly into standard IDF/MDF enclosures.
- CE-certified with a Lifetime Limited Warranty, reducing long-term compliance risk.
$1,019.86 $559.99 Save $459.87The item has been added -
Altronix
SKU: VERTILINE3D
Altronix VERTILINE3D 8-Output Rack Mount Power Supply
8-output rack mount supply with selectable 12/24VDC for distributed systems
- 8 independent regulated outputs deliver up to 8A each at 12VDC or 24VDC.
- Selectable dual-voltage rails support mixed 12V/24V device loads in one rack unit.
- CE-certified with a lifetime limited warranty for long-term rack deployments.
$740.33 $398.99 Save $341.34The item has been added -
Altronix
SKU: VERTILINE48M
Altronix VERTILINE48M 56VDC 6.5A 8-Output Rack Supply
56VDC rack supply with 8 fused outputs for access control and security systems
- Eight independently fused outputs isolate load faults, preventing cascade failures.
- Delivers regulated 56VDC at 6.5A continuous for access control and security loads.
- 2U rack-mount form factor integrates directly alongside switches and controllers.
$1,144.74 $628.99 Save $515.75The item has been added -
Altronix
SKU: VERTILINE48MDV
Altronix VERTILINE48MDV 16-Output 56VDC Rack Power Supply
16-output 56VDC rack supply with individual circuit protection for distributed systems
- 16 individually PTC-protected outputs prevent cascading failures across distributed loads.
- Regulated 56VDC at 6.5A total capacity suits enterprise IP cameras and access control panels.
- 2U rack-mount form factor centralizes power in standard 19-inch racks with supervised outputs.
$1,144.74 $616.99 Save $527.75The item has been added -
Altronix
SKU: VERTILINE563
Altronix VERTILINE563 Dual 56VDC 6A Rack Power Supply
Dual 56VDC 6A rack supply with integrated battery backup
- Two independent 56VDC/6A outputs support redundant power distribution in a single rack unit.
- Integrated battery backup ensures seamless failover during mains power loss.
- UL Listed and CE certified for compliant deployment in North American and European installations.
$817.42 $439.99 Save $377.43The item has been added -
Altronix
SKU: VERTILINE63D
Altronix VERTILINE63D 24VDC 16-Output Rackmount Supply
16-output 24VDC rackmount supply for distributed security power
- 16 independent 24VDC outputs eliminate daisy-chaining and allow per-device cycling.
- Selectable 8A or 16A per output accommodates mixed low- and high-draw security loads.
- 1U rackmount form factor integrates into any standard 19-inch rack on 115VAC mains.
$813.05 $436.99 Save $376.06The item has been added -
Altronix
SKU: VERTILINE63TD
Altronix VERTILINE63TD 16 Output Rack Mount Power Supply - 24VD
16-channel 24VDC rack supply with isolated outputs for distributed power
- 16 isolated 24VDC outputs let you power devices independently on a single 1U unit.
- Delivers up to 16A at 24VDC from a 115VAC feed, simplifying rack power budgeting.
- 1U rackmount form factor fits standard 19-inch enclosures, preserving cabinet space.
$1,020.20 $550.99 Save $469.21The item has been added -
Add to Cart The item has been addedAltronix
SKU: VERTILINE6D
Altronix VERTILINE6D 8-Output Rack Mount Power Supply
8-channel 24VDC rack mount supply for distributed security infrastructure
- Eight isolated 24VDC channels at 8A each simplify multi-zone power distribution.
- Standard 19-inch rack-mount form factor consolidates DC power in constrained equipment rooms.
- 115VAC single-phase input with regulated DC output reduces field wiring complexity.
In stock · Ships same business day$737.29 $395.99 Save $341.30The item has been added -
Altronix
SKU: VERTILINE6DV
Altronix VERTILINE6DV 24VDC 8A Rack-Mount Power Supply
Eight independent 24VDC outputs at 8A each in compact rack mount
- Eight PTC-protected 24VDC outputs prevent short-circuit damage across all connected devices.
- Each independent output delivers up to 8A, supporting high-draw access control or camera loads.
- Standard 19-inch rack-mount form factor centralizes power distribution in equipment room builds.
$737.29 $404.99 Save $332.30The item has been added -
Altronix
SKU: VERTILINE8
Altronix VERTILINE8 CCTV AC Rack Mount Power Supp.115/230VAC
Eight 24/28VAC outputs in 19-inch rack mount for CCTV systems
- Eight independently fused 24/28VAC outputs deliver 5A each for multi-camera arrays.
- Standard 19-inch rack-mount form factor centralizes CCTV power and reduces cable clutter.
- UL Listed with a Lifetime Limited Warranty for compliant, long-term rack deployments.
$795.12 $427.99 Save $367.13The item has been added -
Altronix
SKU: VERTILINE83
Altronix VERTILINE83 8-Output 24/28VAC Power Supply
8-output 24/28VAC rack supply with 10A per channel and dual-voltage input
- 8 independently fused 24/28VAC outputs isolate faults to a single circuit.
- 10A per channel supports high-current PTZ motors and multi-camera circuits.
- Dual-voltage input (115/220VAC) enables deployment across North American and international sites.
$916.09 $502.99 Save $413.10The item has been added -
Altronix
SKU: VERTILINE83C
Altronix VERTILINE83C 8-Output Rack Mount CCTV Power Supply
8-output 24/28VAC rack supply for centralized CCTV camera power
- Eight independently fused outputs isolate faults and protect each camera circuit.
- Selectable 24/28VAC output simplifies compatibility across mixed CCTV camera deployments.
- 1U rack-mount form factor integrates directly into standard security control room enclosures.
$916.09 $502.99 Save $413.10The item has been added
Power is the foundation of every surveillance, access-control, and network system. Centralized, supervised, battery-backed power keeps cameras recording, doors locking, and switches forwarding during outages and surge events. Choose components sized for your load — recorder UPS, camera supplies, PoE midspans, surge protection — and your system runs through the events that take down unmanaged installations.
Plan a Reliable Power System
- Sized power supplies — 12V or 24V DC sized to total device load plus 25% headroom for spin-up, aging, and expansion.
- UPS & battery backup — runtime sized to your outage profile, with managed shutdown for NVRs and access controllers.
- PoE budgets — 802.3af, at, and bt midspans/switches sized for total port load, not just per-port maximum.
- Surge protection & grounding — at the building entrance and at outdoor camera locations exposed to lightning.
- Distribution & redundancy — rack PDUs, DIN-rail supplies for industrial cabinets, and dual-source feeds for life-safety loads.
Shop by Category
UPS & Battery Backup
Rack-mount and tower UPS units sized to NVR, switch, and controller load — line-interactive and double-conversion topologies for clean recovery.
Power Supplies
12V DC and 24V DC supplies for camera and access-control panels — sized by current draw with 25% headroom for surge and expansion.
PoE Injectors & Midspans
802.3af, 802.3at, and 802.3bt midspans for legacy switches — 15W to 90W per port for PTZ cameras, displays, and high-power readers.
Rack Power Supplies
19-inch chassis with distributed outputs — PTC fused, supervised, and battery-backup ready for multi-camera or access-control deployments.
DIN Rail Power Supplies
Industrial DIN-rail supplies for control cabinets — wide-range AC input, redundant pairing, and temperature-rated for harsh environments.
Power Delivery & Supplies
Centralized distribution panels, surge protection, and grounding products for organized, code-compliant low-voltage installations.
Surge Protectors
Inline Ethernet, coax, and AC surge suppressors for outdoor cameras, antenna runs, and equipment-room protection — critical for rooftop and pole-mount installations.
Featured Brands
Altronix
Access-control and CCTV power — rack and wall enclosures, battery backup, and FACP-compatible supervised power.
Lifesafety Power
Networked supervised power for access control and fire — Mercury, LenelS2, and Genetec integrations.
NETGEAR
PoE+ and PoE++ switches and midspans with high port-count power budgets for camera and Wi-Fi deployments.
Ubiquiti
UniFi PoE switches with managed budget per port — strong fit for IT-managed surveillance VLANs.
Cradlepoint
Cellular failover routers with PoE and dual-SIM for branch-site continuity when WAN drops.
Transition Networks
Industrial PoE++ media converters and ruggedized switches for outdoor, transportation, and utility deployments.
Buyer FAQ
How do I size a UPS for my surveillance system?
Add up the wattage of every device on the UPS — recorder, switch, monitor, controller, and PoE budget for the cameras — then add 25% headroom for spin-up and aging. Multiply by your target runtime (typically 15–30 minutes for managed shutdown, 4–8 hours for site continuity) to pick a VA rating. Our team can review your bill of materials and recommend a model — submit details via the contact form.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) delivers up to 15.4W per port — fine for fixed-lens cameras and basic readers. PoE+ (802.3at) lifts that to 30W — covers PTZ heaters, IR illuminators, and most multi-sensor cameras. PoE++ (802.3bt Type 3/4) runs up to 60W or 90W per port for high-power thermal cameras, displays, and access-control controllers. Pick a switch or midspan whose total budget covers the sum of per-port loads, not just the per-port maximum.
Why use a midspan instead of a PoE switch?
When you have an existing non-PoE switch you want to keep, a midspan (PoE injector) adds power without replacing the switch. Midspans also help when you need to upgrade a few high-power ports (60W or 90W) without buying an entire 802.3bt switch.
Do I need surge protection on outdoor cameras?
Yes — outdoor Ethernet runs collect induced energy during nearby strikes even when the camera isn't directly hit. Inline PoE surge protectors at the camera (or at the building entry) clamp the spike and protect the recorder/switch. Critical for any pole-mount or rooftop deployment.
How do I plan power for an access-control system?
Each door typically needs 1–2A at 12V DC (controller + reader + lock + REX). Multiply by door count, then size a supervised power supply (Altronix, Lifesafety) with battery backup matched to UL 294 / NFPA 72 hold-up time for your jurisdiction. Our Senior Specialist team has working integrators who size these systems daily.
Need help sizing your system?
Our team includes working integrators who size camera-system power, PoE budgets, and access-control supplies daily. Send your bill of materials, recorder count, and target runtime — we'll recommend the right UPS, supply, and midspans before you order.