Sub categories

Showing Results for Infrastructure

Compare

Add to Cart The item has been added
NETGEAR

SKU: WAX610-100NAS

NETGEAR WAX610-100NAS 1PT Business WiFi 6 AP
- WiFi 6 (802.11ax) delivers up to 1.2 Gbps on 5 GHz for dense client environments.
- Standard 802.3af PoE input simplifies deployment—no injector or special switch required.
- Standalone Web UI with per-SSID QoS eliminates controller dependency for faster rollout.
$254.88 $156.99 Save $97.89

Add to Cart
The item has been added
Free shipping over $499

$254.88 $156.99 Save $97.89

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: WAX610Y-100NAS

NETGEAR WAX610Y-100NAS 1PT Business WiFi 6 Outdoor AP
- WiFi 6 (802.11ax) delivers up to 1.2 Gbps aggregate across 50,000+ sq ft outdoors.
- PoE++ (802.3bt) input eliminates separate power runs to remote wall or ceiling mounts.
- Industrial temp rating and UV-stabilized plastic housing sustain full-season outdoor operation.
$350.47 $198.99 Save $151.48

Add to Cart
The item has been added
Free shipping over $499

$350.47 $198.99 Save $151.48

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: WAX615PA-100NAS

NETGEAR WAX615PA-100NAS 1PT Insight Managed WiFi6 AX3000
- WiFi 6 AX3000 supports 100+ concurrent clients without throughput saturation.
- Dual 4x4 MIMO on 5GHz reduces dead zones in open-plan and multi-floor deployments.
- 802.3at PoE input (15.3–30.1W) eliminates dedicated power runs at each AP location.
$327.57 $245.99 Save $81.58

Add to Cart
The item has been added
Free shipping over $499

$327.57 $245.99 Save $81.58

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: WAX620PA-100NAS

NETGEAR WAX620PA-100NAS WiFi 6 Power Adapter
- Delivers 802.3at PoE+ power (9W–25.5W) to the WAX620 over a single cable run.
- 2.5G Multi-Gig Ethernet port preserves full AX3600 throughput without a separate power drop.
- Requires Cat 6A cabling and a PoE+ switch providing ≥30W per port for reliable operation.
$326.57 $201.99 Save $124.58

Add to Cart
The item has been added
Free shipping over $499

$326.57 $201.99 Save $124.58

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: WAX630-100NAS

NETGEAR WAX630-100NAS 2PT Business WiFi 6 AP
- Tri-band WiFi 6 delivers 6 Gbps aggregate throughput across one 2.4GHz and two 5GHz radios.
- 2.5Gbps PoE++ uplink draws only 9.3W typical, easing PoE budget planning on existing switches.
- Cloud-managed via Insight dashboard with 8 SSIDs and VLAN isolation; 1-year subscription included.
$545.96 $389.99 Save $155.97

Add to Cart
The item has been added
Free shipping over $499

$545.96 $389.99 Save $155.97

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: WBE710-100NAS

NETGEAR WBE710-100NAS WiFi 7 Access Point
- WiFi 7 tri-band radio delivers 9.4 Gbps aggregate wireless throughput.
- Powered via 2.5G PoE++ (802.3bt) input — no separate power supply required.
- Wall or ceiling mount form factor suits both open-floor and corridor deployments.
$493.85 $288.99 Save $204.86

Add to Cart
The item has been added
Free shipping over $499

$493.85 $288.99 Save $204.86

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: WBE718-111NAS

NETGEAR WBE718 Tri-Band PoE 2.5G Insight - WBE718-111NAS
- WiFi 7 tri-band (2.4/5/6 GHz) cuts congestion in dense camera and access-control deployments.
- 2.5G Ethernet uplink prevents backhaul bottlenecks on PoE switches serving real-time security devices.
- Single-cable 802.3at PoE eliminates auxiliary power runs on ceiling and wall-mount installs.
$1,035.50 $491.99 Save $543.51

Add to Cart
The item has been added
Free shipping over $499

$1,035.50 $491.99 Save $543.51

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: WBE750-100NAS

NETGEAR WBE750-100NAS WiFi 7 Access Point
- 18.4 Gbps tri-band WiFi 7 handles concurrent voice, video, and IoT traffic.
- 10G Ethernet uplink prevents backhaul bottlenecks in high-density deployments.
- PoE++ (802.3bt) input eliminates separate power runs for wall or ceiling mounts.
$987.71 $601.99 Save $385.72

Add to Cart
The item has been added
Free shipping over $499

$987.71 $601.99 Save $385.72

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: WBE758-111NAS

NETGEAR WBE758 Tri-Band PoE 10G Insight - WBE758-111NAS
- Wi-Fi 7 tri-band delivers 19+ Gbps aggregate, handling mixed camera and client loads.
- 10G PoE uplink eliminates uplink saturation across multi-AP surveillance deployments.
- 802.3bt PoE++ input removes auxiliary power runs, simplifying ceiling-mount installs.
$1,593.09 $846.99 Save $746.10

Add to Cart
The item has been added
Free shipping over $499

$1,593.09 $846.99 Save $746.10

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RNR4XCHG-10000S

NETGEAR X-change System Board Module FOR - RNR4XCHG-10000S
- Direct drop-in replacement for ReadyNAS 1100 — no RAID rebuild or data migration required.
- Preserves existing RAID metadata, NFS/SMB shares, and surveillance recording policies on swap.
- Board auto-detects attached drives on power-up, minimizing downtime during hardware failure recovery.
$1,400.00 $965.99 Save $434.01

Add to Cart
The item has been added
Free shipping over $499

$1,400.00 $965.99 Save $434.01

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: XS508M-100NAS

NETGEAR XS508M-100NAS 8PT 10G Unmanaged Switch
- 8 × 10G ports deliver 80 Gbps non-blocking throughput for trunk and aggregation links.
- Unmanaged design requires zero configuration — powers on and forwards frames at wire speed.
- Rated 0°C–40°C with plastic enclosure; suits edge and non-climate-controlled installations.
$862.86 $559.99 Save $302.87

Add to Cart
The item has been added
Free shipping over $499

$862.86 $559.99 Save $302.87

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: XS508TM-100NAS

NETGEAR XS508TM-100NAS 8-Port 10G Smart Switch
- All 8 ports run 10 Gbps symmetric throughput, eliminating mixed-speed bottlenecks.
- PoE++ (802.3bt) on every port powers high-draw PTZ and thermal devices up to ~90W.
- Built-in 802.1Q VLANs and port-level QoS isolate and prioritize surveillance traffic.
$1,332.40 $777.99 Save $554.41

Add to Cart
The item has been added
Free shipping over $499

$1,332.40 $777.99 Save $554.41

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: XS512EM-200NAS

NETGEAR XS512EM-200NAS 12-Port 10-Gigabit Ethernet Switch
- 12 × 10G ports and 176 Gbps non-blocking fabric handle simultaneous 4K NVR streams.
- Web GUI, VLAN, QoS, and SNMP monitoring reduce setup complexity without sacrificing control.
- Wall and ceiling mount options with industrial-rated housing suit retrofit closet deployments.
$1,464.00 $1,007.99 Save $456.01

Add to Cart
The item has been added
Free shipping over $499

$1,464.00 $1,007.99 Save $456.01

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: XS516TM-100NAS

NETGEAR XS516TM-100NAS PoE Network Switch
- All 16 ports run at 10G, supporting dense high-resolution IP camera deployments.
- 160 Gbps throughput eliminates bottlenecks across simultaneous multi-stream video feeds.
- Managed via Web GUI and SNMP with VLAN and QoS support for traffic segmentation.
$2,172.40 $1,251.99 Save $920.41

Add to Cart
The item has been added
Free shipping over $499

$2,172.40 $1,251.99 Save $920.41

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: XS724TM-100NAS

NETGEAR XS724TM-100NAS 24-Port 10G Smart Switch
- All 24 ports run at 10 Gbps, eliminating bottlenecks on dense multi-NVR topologies.
- Web GUI and SNMP management enable VLAN segmentation and QoS without CLI expertise.
- Wall- or ceiling-mountable plastic housing with a 5-year warranty suits retrofit deployments.
$3,417.92 $1,963.99 Save $1,453.93

Add to Cart
The item has been added
Free shipping over $499

$3,417.92 $1,963.99 Save $1,453.93

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: XS748T-100NES

Netgear XS748T-100NES
- All 48 ports run at 10GbE, eliminating uplink bottlenecks in dense camera deployments.
- Layer 3 management via CLI, Web GUI, and SNMP enables VLAN segmentation and QoS control.
- 5-year warranty backs long-term deployment in enterprise and industrial network backbones.
$7,147.32 $4,923.99 Save $2,223.33

Add to Cart
The item has been added
Free shipping over $499

$7,147.32 $4,923.99 Save $2,223.33

Add to cart Add to quote Compare

Infrastructure

Infrastructure components provide the network and power backbone that supports reliable surveillance and access control systems. Select switches, PoE devices, power supplies, and transmission hardware designed for commercial environments.

Plan Your Deployment

Total PoE power budget and port density requirements
Switch throughput and uplink capacity planning
Redundancy and failover design considerations
Distance limitations and fiber conversion needs
Power conditioning and voltage compatibility

PoE Planning Guide Get Sizing Help

What to Look For When Buying

The six decisions that matter most before you spec.

PoE Power Budget Math

A 24-port PoE+ switch with 370W total budget can't actually run 24 outdoor cameras at peak 25W each. Simultaneous peak — not nameplate — is the limit. Always verify per-port PoE allocation and total budget against actual camera load. See PoE budget planning and why your PoE switch fails after 18 cameras.

328-Foot Ethernet Limit

Cat5e, Cat6, and Cat6A all top out at 100 meters (328ft) per TIA-568. Past that, you need a media converter to fiber, a PoE extender, or an intermediate switch. Common gotcha: in-wall patch + faceplate + drop + jumper all count against 328ft. Long runs to perimeter cameras frequently exceed the limit — plan for fiber or coax-PoE extension.

Managed vs Unmanaged Switches

Unmanaged switches work for small deployments but provide no VLAN segmentation, no QoS for video traffic, no monitoring, and no remote troubleshooting. Managed switches (Layer 2 or Layer 3) let you isolate cameras on a dedicated VLAN, prioritize video over office traffic, and diagnose link failures from a central SNMP platform. Spec managed for any deployment over 8 cameras.

UPS Sizing & Runtime

NVR + switches + cameras + access control have very different power profiles than office gear. Size UPS for actual wattage of all connected loads + 20% headroom, and calculate runtime with battery-life curves (runtime is non-linear — doubling load often cuts runtime 60%+). Surveillance UPS should provide 15-30 min to accommodate generator transfer or graceful shutdown.

Copper vs Fiber Uplinks

In-rack uplinks on 10G copper (Cat6A) work fine for short runs. Between-building and multi-floor uplinks should be fiber — single-mode for >300m, multimode for under. Fiber is also electrically isolated, which matters in lightning-prone environments. Axis, Hanwha, and Ubiquiti switches include SFP/SFP+ uplinks across most models.

Cooling & Airflow in Racks

Surveillance gear runs 24/7 — a closed rack at 90°F interior temperature will fail drives and switches faster than spec. Specify perforated doors, rack-mount fans, and leave 1U of airflow gap above/below heat-generating equipment. NVRs with internal fans need front-to-back airflow; network switches vary by vendor. Check thermal spec before sealing a wall-mount enclosure.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

802.3af / at / bt PoE Standards

802.3af = 15.4W/port (entry cameras), 802.3at PoE+ = 25.5W/port (most outdoor cameras), 802.3bt PoE++ Type 3 = 60W, Type 4 = 90W (PTZ, heated, multi-sensor). Specify switch support for the highest standard your cameras need — future-proofing with PoE++ switches costs marginally more.

TIA-568 Cabling Standards

Cat5e rated to 1 Gbps at 100m. Cat6 rated to 10 Gbps at 55m, 1 Gbps at 100m. Cat6A rated to 10 Gbps at 100m with proper grounding. Use Cat6A for new surveillance cabling runs — marginal cost premium over Cat6, meaningful margin for long runs + high PoE.

SFP / SFP+ / QSFP+ Modules

Small Form-factor Pluggable optics for fiber uplinks. SFP = 1 Gbps, SFP+ = 10 Gbps, QSFP+ = 40 Gbps. Match module to switch vendor compatibility (some vendors lock to their own brand of optics). Multimode fiber with OM3/OM4 for ≤300m, single-mode for longer or future-proof runs.

VLAN Segmentation

Dedicated VLAN for surveillance isolates camera traffic from office network — improves security (camera-to-camera lateral movement blocked), performance (no contention with office traffic), and troubleshooting. Configure access-control and intercom VLANs separately. Managed switches required; unmanaged switches cannot segment.

Long-Reach PoE Extension

Ethernet-over-Coax (EoC) extends Ethernet + PoE to 1,500+ feet over existing RG59 coax — ideal for analog-to-IP retrofits. Ethernet-over-UTP extenders push runs to 4,000ft over CAT cable. NVT Phybridge CHARIoT, Altronix eBridge, and Veracity Highwire are the common product families. Rate-limited to 100 Mbps typically.

UPS Topology: Line-Interactive vs Double-Conversion

Line-interactive UPS switch to battery on power failure — sufficient for office gear. Double-conversion (online) UPS convert AC→DC→AC continuously, providing perfectly conditioned power — required for sensitive SCADA/security gear in dirty-power environments. Specify double-conversion for NVRs at critical sites.

Typical Deployment Scenarios

8-Camera Single-Site Retrofit

Existing network + 8 outdoor IP cameras. Add a 16-port managed PoE+ switch (Ubiquiti UniFi, Axis T85) on a dedicated VLAN. 1U rack UPS for the NVR + switch. 120-160 watts total PoE budget comfortably runs 8 outdoor cameras with heater + IR.

48-Camera Campus Upgrade

Four buildings, 48 cameras total, existing fiber backbone. Per-building 24-port PoE++ switch with SFP+ fiber uplink to core. Dedicated surveillance VLAN, QoS for video traffic, SNMP monitoring. 2-post relay rack in each IDF closet with dedicated surveillance UPS.

Perimeter Fence Line (1,200ft)

6 bullet cameras + 2 PTZs along perimeter fence, main NVR in building. Fiber media converter + outdoor-rated fiber to a PoE++ switch in a weatherproof enclosure at the fence line. Alternative: NVT Phybridge CHARIoT over existing coax for retrofit applications.

Multi-Floor Office Tower

Stacked IDFs on every floor, cameras + access control + intercom on dedicated VLANs. Cisco Catalyst or Ubiquiti UniFi Pro managed switches per floor with 10G fiber uplink to building core. Per-IDF 3U UPS. Integration with VMS and access control head-end at main BDF.

Frequently Asked Questions

How do I calculate PoE budget for a camera deployment?

Sum the peak wattage of every camera (not nameplate — check spec sheet for "PoE class" or "max consumption"). Add 15-20% headroom for inrush during cold-start. The result is your required simultaneous-peak PoE budget. A 24-port PoE+ switch advertised at 370W can only run about 18 outdoor cameras with heaters + IR — see PoE budget planning.

What's the maximum Ethernet cable run for an IP camera?

100 meters (328 feet) per TIA-568 — total distance from switch port to camera port. That includes in-rack patch cords, in-wall cabling, faceplate jack, and camera jumper. For longer runs, use fiber with a media converter or a long-reach PoE extender. Going past 328ft on copper causes intermittent packet loss that looks like camera problems.

Do I need managed or unmanaged PoE switches?

For more than 8 cameras or any mixed-use network (cameras sharing infrastructure with office traffic), specify managed. VLAN segmentation isolates camera traffic for security and performance; QoS ensures video gets bandwidth priority; SNMP monitoring surfaces failures before users call. Unmanaged switches are acceptable only for small standalone deployments.

What UPS runtime should I plan for an NVR + switch?

15-30 minutes of runtime at actual load is typical — enough to ride through brief outages or allow graceful shutdown before battery exhaustion. For sites with generator transfer, 5-10 minutes is sufficient. Size UPS wattage for actual connected load + 20%, and use the vendor's runtime-at-load curve (runtime is non-linear). Double-conversion UPS for sensitive or dirty-power sites.

How far can I extend PoE past 328 feet?

Ethernet-over-Coax extenders (NVT Phybridge CHARIoT, Altronix eBridge) push Ethernet + PoE to 1,500+ feet over existing RG59/RG6 coax — ideal for analog-to-IP retrofits. UTP-based extenders reach 2,000-4,000 feet on Cat cable at reduced bandwidth (typically 100 Mbps). For new runs over 328ft, fiber + PoE switch at the camera end is usually cleaner architecture.

Should I put cameras on a separate VLAN?

Yes — always. A dedicated camera VLAN isolates camera traffic from office network for security (blocks camera-to-camera lateral movement if one is compromised), performance (cameras don't contend with office bandwidth), and troubleshooting (camera traffic is cleanly separated for packet capture). Requires managed switches; takes 10 minutes to configure on Ubiquiti UniFi, Cisco Catalyst, or any enterprise switch.

Sub categories

Showing Results for Infrastructure

Infrastructure

Plan Your Deployment

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading