Sub categories

Showing Results for Infrastructure

Compare

Out of stock
NETGEAR

SKU: 6000451-10000S

NETGEAR 6000451-10000S 3/4/5G Mobile MIMO Antenna
- Dual-element MIMO with 4.1/4.6 dBi gain strengthens 3G/4G LTE/5G links in shielded sites.
- Wall and ceiling mounting options let you optimize signal capture without structural changes.
- Plastic enclosure with industrial temperature rating suits warehouses, substations, and field offices.
$85.33 $59.99 Save $25.34

Add to Cart
The item has been added
Free shipping over $499

$85.33 $59.99 Save $25.34

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: PR460X-111NAS

NETGEAR 6PT 10G/MG PRO Router W/4Y Insight - PR460X-111NAS
- Six 10G/multi-gigabit ports eliminate bottlenecks across high-density camera tiers.
- Layer 3 routing with OSPF, RIPv2, and 64 VLANs segments camera and office traffic.
- Four years of Insight cloud management included for multi-site remote monitoring.
$1,100.68 $523.99 Save $576.69

Add to Cart
The item has been added
Free shipping over $499

$1,100.68 $523.99 Save $576.69

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: RAXE300-100NAS

NETGEAR 6PT AXE7800 Wifi 6E - RAXE300-100NAS
- AXE7800 tri-band WiFi 6E supports 50+ concurrent clients with reduced airtime congestion.
- Six Gigabit Ethernet ports handle IP cameras, APs, and NVR backhaul without added switches.
- 6 GHz band provides 7 additional 80 MHz channels, cutting co-channel interference on-site.
$465.50 $326.99 Save $138.51

Add to Cart
The item has been added
Free shipping over $499

$465.50 $326.99 Save $138.51

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: RS700S-100NAS

NETGEAR 6PT Nighthawk WIFI 7 Tri-band Rout - RS700S-100NAS
- WiFi 7 tri-band isolates surveillance streams on dedicated 6 GHz band.
- Six Gigabit Ethernet ports hardwire cameras, NVRs, and PoE switches directly.
- 802.11be backhaul extends remote camera clusters without added cabling runs.
$931.02 $650.99 Save $280.03

Add to Cart
The item has been added
Free shipping over $499

$931.02 $650.99 Save $280.03

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: GS308LP-100NAS

NETGEAR 8 Port Gigabit Ethernet Unmanaged - GS308LP-100NAS
- All 8 ports deliver 802.3at PoE+ up to 30W each for cameras and readers.
- 123W shared PoE budget supports up to eight mid-power IP cameras on one switch.
- Unmanaged plug-and-play operation requires zero configuration for fast deployment.
In stock · Ships same business day

$129.79 $74.99 Save $54.80

Add to Cart
The item has been added
Free shipping over $499

$129.79 $74.99 Save $54.80

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: GS308EP-100NAS

Netgear 8-PORT Gigabit Ethernet Poe+ Smart - GS308EP-100NAS
- 8-port Gigabit smart switch with PoE+ on every port
- Up to 30W per port for mid-range cameras and APs
- Eliminates separate PoE injectors for camera deployments
$153.07 $88.99 Save $64.08

Add to Cart
The item has been added
Free shipping over $499

$153.07 $88.99 Save $64.08

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: GS108-411NAS

NETGEAR 8PT Copper Gigabit Switch - GS108-411NAS
- All 8 copper ports run 1 Gbps full-duplex on a 16 Gbps non-blocking fabric.
- Passes PoE+ (802.3at, 30W/port) upstream — no separate injectors needed per run.
- Fanless, zero-config design installs in closets or DIN-rail without IT overhead.
$75.86 $52.99 Save $22.87

Add to Cart
The item has been added
Free shipping over $499

$75.86 $52.99 Save $22.87

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: GS108MX-100NAS

NETGEAR 8PT Gig Um 1P 10G/Multi-Gig Uplink - GS108MX-100NAS
- 8x 1GbE ports aggregate camera, NVR, and sensor traffic to a single backhaul.
- 10G/Multi-Gig uplink supports 2.5G, 5G, and 10GBASE-T to match your backbone speed.
- Unmanaged plug-and-play operation requires zero configuration for fast edge deployment.
$191.74 $125.99 Save $65.75

Add to Cart
The item has been added
Free shipping over $499

$191.74 $125.99 Save $65.75

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: MS108TUP-100NAS

NETGEAR 8PT Poe++ Multigig Smart Swch - MS108TUP-100NAS
- All 8 ports deliver PoE++ at 95W each, powering PTZ and multi-sensor cameras without injectors.
- Multi-gig uplinks (2.5G/5G/10G) prevent aggregation bottlenecks when all 8 PoE ports run full throughput.
- VLAN, SNMP, CLI, and Web GUI management simplify segmentation and monitoring in commercial deployments.
$579.30 $405.99 Save $173.31

Add to Cart
The item has been added
Free shipping over $499

$579.30 $405.99 Save $173.31

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: EX6120-100NAS

NETGEAR AC1200 WIFI Range Extender - Essentials - EX6120-100NAS
- AC1200 dual-band (2.4 GHz + 5 GHz) extends 802.11ac coverage without proprietary firmware.
- Gigabit Ethernet port supports hardwired IP cameras or NVRs where cable runs are feasible.
- Plug-in wall-mount form factor simplifies deployment in warehouses and retail environments.
$170.67 $118.99 Save $51.68

Add to Cart
The item has been added
Free shipping over $499

$170.67 $118.99 Save $51.68

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: EX6250-100NAS

NETGEAR AC1750 Dual-band WIFI Mesh Extender - EX6250-100NAS
- AC1750 (1.7 Gbps aggregate) dual-band backhaul supports multiple simultaneous IP camera feeds.
- 802.11ac Wi-Fi 5 compatible with any standard router—no proprietary mesh protocol lock-in.
- Wall-plug form factor with internal antennas deploys in tight spaces without external protrusions.
$155.16 $106.99 Save $48.17

Add to Cart
The item has been added
Free shipping over $499

$155.16 $106.99 Save $48.17

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: EX3110-100NAS

NETGEAR AC750 WIFI Range Extender - Supports NEW - EX3110-100NAS
- AC750 dual-band (433 Mbps 5 GHz + 300 Mbps 2.4 GHz) supports simultaneous camera streams.
- Transparent repeater mode lets IP cameras and NVRs connect automatically without reconfiguration.
- Wall-outlet powered (11V AC); no PoE infrastructure required for quick deployment in dead zones.
$62.05 $43.99 Save $18.06

Add to Cart
The item has been added
Free shipping over $499

$62.05 $43.99 Save $18.06

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: AFT402-10000S

NETGEAR AFT402-10000S Fan Tray for M4500 Switches
- Drop-in OEM fit for M4500-32C and M4500-48XF8C chassis—no modifications required.
- Sustains airflow across C3558/8GB DDR3 ECC under 3,558W sustained switching load.
- Protects 32-port 10G/100G fabric and out-of-band 1G management port from thermal throttling.
$217.22 $151.99 Save $65.23

Add to Cart
The item has been added
Free shipping over $499

$217.22 $151.99 Save $65.23

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: AGM722F

NETGEAR AGM722F Fiber 1000BASE-LX Gbic Module
- Extends Gigabit Ethernet up to 10 km over single-mode fiber without repeaters.
- Eliminates ground loops and EMI interference across long campus or industrial runs.
- Hot-swappable GBIC form factor allows live insertion with no switch downtime.
$700.00 $482.99 Save $217.01

Add to Cart
The item has been added
Free shipping over $499

$700.00 $482.99 Save $217.01

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: AGM731F

Netgear AGM731F
- Delivers 1 Gbps throughput over multimode fiber for bandwidth-intensive surveillance streams.
- SFP mini-GBIC form factor is hot-swappable, enabling live replacement without switch downtime.
- Industrial operating temperature rating supports reliable deployment in warehouses and harsh sites.
$188.26 $109.99 Save $78.27

Add to Cart
The item has been added
Free shipping over $499

$188.26 $109.99 Save $78.27

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: AGM732F

Netgear AGM732F 1000BASE-LX SFP Gbic
- 1000BASE-LX single-mode fiber delivers reliable 1 Gbps links up to 10 km.
- Hot-swappable SFP form factor allows live insertion with zero network downtime.
- Industrial temperature rating supports uncontrolled closets and outdoor cabinets.
$391.02 $228.99 Save $162.03

Add to Cart
The item has been added
Free shipping over $499

$391.02 $228.99 Save $162.03

Add to cart Add to quote Compare

Infrastructure

Infrastructure components provide the network and power backbone that supports reliable surveillance and access control systems. Select switches, PoE devices, power supplies, and transmission hardware designed for commercial environments.

Plan Your Deployment

Total PoE power budget and port density requirements
Switch throughput and uplink capacity planning
Redundancy and failover design considerations
Distance limitations and fiber conversion needs
Power conditioning and voltage compatibility

PoE Planning Guide Get Sizing Help

What to Look For When Buying

The six decisions that matter most before you spec.

PoE Power Budget Math

A 24-port PoE+ switch with 370W total budget can't actually run 24 outdoor cameras at peak 25W each. Simultaneous peak — not nameplate — is the limit. Always verify per-port PoE allocation and total budget against actual camera load. See PoE budget planning and why your PoE switch fails after 18 cameras.

328-Foot Ethernet Limit

Cat5e, Cat6, and Cat6A all top out at 100 meters (328ft) per TIA-568. Past that, you need a media converter to fiber, a PoE extender, or an intermediate switch. Common gotcha: in-wall patch + faceplate + drop + jumper all count against 328ft. Long runs to perimeter cameras frequently exceed the limit — plan for fiber or coax-PoE extension.

Managed vs Unmanaged Switches

Unmanaged switches work for small deployments but provide no VLAN segmentation, no QoS for video traffic, no monitoring, and no remote troubleshooting. Managed switches (Layer 2 or Layer 3) let you isolate cameras on a dedicated VLAN, prioritize video over office traffic, and diagnose link failures from a central SNMP platform. Spec managed for any deployment over 8 cameras.

UPS Sizing & Runtime

NVR + switches + cameras + access control have very different power profiles than office gear. Size UPS for actual wattage of all connected loads + 20% headroom, and calculate runtime with battery-life curves (runtime is non-linear — doubling load often cuts runtime 60%+). Surveillance UPS should provide 15-30 min to accommodate generator transfer or graceful shutdown.

Copper vs Fiber Uplinks

In-rack uplinks on 10G copper (Cat6A) work fine for short runs. Between-building and multi-floor uplinks should be fiber — single-mode for >300m, multimode for under. Fiber is also electrically isolated, which matters in lightning-prone environments. Axis, Hanwha, and Ubiquiti switches include SFP/SFP+ uplinks across most models.

Cooling & Airflow in Racks

Surveillance gear runs 24/7 — a closed rack at 90°F interior temperature will fail drives and switches faster than spec. Specify perforated doors, rack-mount fans, and leave 1U of airflow gap above/below heat-generating equipment. NVRs with internal fans need front-to-back airflow; network switches vary by vendor. Check thermal spec before sealing a wall-mount enclosure.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

802.3af / at / bt PoE Standards

802.3af = 15.4W/port (entry cameras), 802.3at PoE+ = 25.5W/port (most outdoor cameras), 802.3bt PoE++ Type 3 = 60W, Type 4 = 90W (PTZ, heated, multi-sensor). Specify switch support for the highest standard your cameras need — future-proofing with PoE++ switches costs marginally more.

TIA-568 Cabling Standards

Cat5e rated to 1 Gbps at 100m. Cat6 rated to 10 Gbps at 55m, 1 Gbps at 100m. Cat6A rated to 10 Gbps at 100m with proper grounding. Use Cat6A for new surveillance cabling runs — marginal cost premium over Cat6, meaningful margin for long runs + high PoE.

SFP / SFP+ / QSFP+ Modules

Small Form-factor Pluggable optics for fiber uplinks. SFP = 1 Gbps, SFP+ = 10 Gbps, QSFP+ = 40 Gbps. Match module to switch vendor compatibility (some vendors lock to their own brand of optics). Multimode fiber with OM3/OM4 for ≤300m, single-mode for longer or future-proof runs.

VLAN Segmentation

Dedicated VLAN for surveillance isolates camera traffic from office network — improves security (camera-to-camera lateral movement blocked), performance (no contention with office traffic), and troubleshooting. Configure access-control and intercom VLANs separately. Managed switches required; unmanaged switches cannot segment.

Long-Reach PoE Extension

Ethernet-over-Coax (EoC) extends Ethernet + PoE to 1,500+ feet over existing RG59 coax — ideal for analog-to-IP retrofits. Ethernet-over-UTP extenders push runs to 4,000ft over CAT cable. NVT Phybridge CHARIoT, Altronix eBridge, and Veracity Highwire are the common product families. Rate-limited to 100 Mbps typically.

UPS Topology: Line-Interactive vs Double-Conversion

Line-interactive UPS switch to battery on power failure — sufficient for office gear. Double-conversion (online) UPS convert AC→DC→AC continuously, providing perfectly conditioned power — required for sensitive SCADA/security gear in dirty-power environments. Specify double-conversion for NVRs at critical sites.

Typical Deployment Scenarios

8-Camera Single-Site Retrofit

Existing network + 8 outdoor IP cameras. Add a 16-port managed PoE+ switch (Ubiquiti UniFi, Axis T85) on a dedicated VLAN. 1U rack UPS for the NVR + switch. 120-160 watts total PoE budget comfortably runs 8 outdoor cameras with heater + IR.

48-Camera Campus Upgrade

Four buildings, 48 cameras total, existing fiber backbone. Per-building 24-port PoE++ switch with SFP+ fiber uplink to core. Dedicated surveillance VLAN, QoS for video traffic, SNMP monitoring. 2-post relay rack in each IDF closet with dedicated surveillance UPS.

Perimeter Fence Line (1,200ft)

6 bullet cameras + 2 PTZs along perimeter fence, main NVR in building. Fiber media converter + outdoor-rated fiber to a PoE++ switch in a weatherproof enclosure at the fence line. Alternative: NVT Phybridge CHARIoT over existing coax for retrofit applications.

Multi-Floor Office Tower

Stacked IDFs on every floor, cameras + access control + intercom on dedicated VLANs. Cisco Catalyst or Ubiquiti UniFi Pro managed switches per floor with 10G fiber uplink to building core. Per-IDF 3U UPS. Integration with VMS and access control head-end at main BDF.

Frequently Asked Questions

How do I calculate PoE budget for a camera deployment?

Sum the peak wattage of every camera (not nameplate — check spec sheet for "PoE class" or "max consumption"). Add 15-20% headroom for inrush during cold-start. The result is your required simultaneous-peak PoE budget. A 24-port PoE+ switch advertised at 370W can only run about 18 outdoor cameras with heaters + IR — see PoE budget planning.

What's the maximum Ethernet cable run for an IP camera?

100 meters (328 feet) per TIA-568 — total distance from switch port to camera port. That includes in-rack patch cords, in-wall cabling, faceplate jack, and camera jumper. For longer runs, use fiber with a media converter or a long-reach PoE extender. Going past 328ft on copper causes intermittent packet loss that looks like camera problems.

Do I need managed or unmanaged PoE switches?

For more than 8 cameras or any mixed-use network (cameras sharing infrastructure with office traffic), specify managed. VLAN segmentation isolates camera traffic for security and performance; QoS ensures video gets bandwidth priority; SNMP monitoring surfaces failures before users call. Unmanaged switches are acceptable only for small standalone deployments.

What UPS runtime should I plan for an NVR + switch?

15-30 minutes of runtime at actual load is typical — enough to ride through brief outages or allow graceful shutdown before battery exhaustion. For sites with generator transfer, 5-10 minutes is sufficient. Size UPS wattage for actual connected load + 20%, and use the vendor's runtime-at-load curve (runtime is non-linear). Double-conversion UPS for sensitive or dirty-power sites.

How far can I extend PoE past 328 feet?

Ethernet-over-Coax extenders (NVT Phybridge CHARIoT, Altronix eBridge) push Ethernet + PoE to 1,500+ feet over existing RG59/RG6 coax — ideal for analog-to-IP retrofits. UTP-based extenders reach 2,000-4,000 feet on Cat cable at reduced bandwidth (typically 100 Mbps). For new runs over 328ft, fiber + PoE switch at the camera end is usually cleaner architecture.

Should I put cameras on a separate VLAN?

Yes — always. A dedicated camera VLAN isolates camera traffic from office network for security (blocks camera-to-camera lateral movement if one is compromised), performance (cameras don't contend with office bandwidth), and troubleshooting (camera traffic is cleanly separated for packet capture). Requires managed switches; takes 10 minutes to configure on Ubiquiti UniFi, Cisco Catalyst, or any enterprise switch.

Sub categories

Showing Results for Infrastructure

Infrastructure

Plan Your Deployment

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading