Cradlepoint 170623-001 US Power Line Cord C7 1.8M
Overview
The Cradlepoint 170623-001 is a standard AC power line cord designed for Cradlepoint networking equipment. This 1.8-meter (approximately 5.9 feet) cord bridges the gap between a standard US wall outlet and Cradlepoint routers or appliances that require C7 power input. The model number 170623-001 (often searched as 170623 001) is a straightforward replacement or spare cable suitable for branch offices, remote sites, data centers, and any deployment where power redundancy or cable replacement is necessary.
Key Features
- NEMA 1-15 Connector (Plug End): Standard US male connector rated for 110–120V outlets. This is the most common wall outlet type in North America, so the cord will fit any standard US electrical outlet without adapters or special wiring.
- IEC 60320 C7 Connector (Device End): The C7 connector is designed for low-power equipment. This connector is narrower and more compact than larger C13/C19 standards, making it ideal for compact appliances and routers where space is tight or cord routing must be precise.
- 1.8-Meter Length: Approximately 5.9 feet of cable provides enough reach for typical equipment placement 3–6 feet from the wall outlet. Long enough for flexible placement without slack, short enough to avoid trailing hazards in confined server racks or warehouse automation setups.
- Compatible with Cradlepoint Product Line: The C7 connector matches Cradlepoint routers and appliances requiring this input type. Always verify your device's power input specification before ordering — mismatched connectors will not fit, so checking your equipment's manual or label is essential.
- Replacement or Redundancy: Use this cord as a spare for primary deployments or as a backup for critical branch office or remote-site connectivity. Having a spare on hand reduces downtime if the primary cord fails or is damaged.
- Standard Safety Certification: The cord meets US electrical safety standards for plug and connector design, ensuring it performs safely under normal operating conditions and typical power loads for Cradlepoint equipment.
Deployment Context
The 170623-001 is a consumable accessory, not a performance component — its job is to deliver power reliably. It makes sense in two main scenarios: (1) as an original replacement when an existing cord wears out, gets damaged, or is misplaced, and (2) as a spare kept on hand at remote or branch sites where equipment downtime is costly and a replacement cord cannot be sourced quickly. In warehouse automation or security integrator deployments, having spare power cords on the shelf for critical routers or appliances is common practice and reduces mean time to recovery (MTTR) if a failure occurs.
Because this is a passive cable with no electronics, power delivery is straightforward — it simply carries standard AC mains voltage and current to your Cradlepoint device. The cord does not reduce or regulate voltage, add surge protection, or filter noise. If your site requires surge suppression or backup power, those are separate purchases (a UPS or surge-protected power strip).
When to Choose a Different Option
If your Cradlepoint device requires a different connector type (such as C13 for larger appliances or a proprietary connector), this cord will not be compatible. Always confirm your device's power input label or manual before ordering. If you need integrated surge protection or uninterruptible power supply (UPS) functionality, consider a separate UPS unit or surge strip alongside this cord rather than a specialty cable.
Frequently Asked Questions
Q: Will the 170623-001 fit my Cradlepoint device?
A: Only if your device has an IEC 60320 C7 power input connector. Check your device's power label or manual. If the input is labeled "C7," this cord is compatible. Other connector types (C13, C19, proprietary) will not fit.
Q: Can I use this cord outside the US?
A: The NEMA 1-15 connector is US-specific and will not fit international wall outlets. For non-US deployments, you will need a cord with the appropriate regional connector (such as UK, EU, or IEC 60320 C6/C7 variants designed for those markets).
Q: Is 1.8 meters long enough for my setup?
A: At approximately 5.9 feet, the 1.8M length is suitable for equipment placement 3–6 feet from the outlet. If you need longer reach, you may need a power extension cord or alternative routing. Verify outlet distance before ordering.
Q: Does this cord add any surge protection or filtering?
A: No. This is a passive power cord with no active protection. If surge suppression is required, install a separate surge-protected power strip or UPS between the outlet and the cord.
Q: What is the maximum power load this cord can handle?
A: The C7 connector and NEMA 1-15 plug are rated for standard household loads (typically under 15A at 120V). Cradlepoint routers and appliances are low-power devices and operate well within this rating. Do not use this cord for high-power equipment such as heaters or air compressors.
Q: Is this a used or new cord?
A: This unit is supplied in used condition. Inspect the cord and connectors for damage, kinks, or discoloration before installation. If the cord shows signs of wear, it is safer to use a new replacement.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Cradlepoint 170623-001 is a straightforward replacement power cord—nothing fancy, but critical for continuous operation. At 1.8 meters with a C7 connector on one end and NEMA 1-15 on the other, it bridges standard US wall outlets to Cradlepoint networking equipment that expects low-voltage, low-current input. In field deployments, especially remote branch offices or data centers, having spare cords on hand is just good preventive maintenance.
Technical Highlights:
- IEC 60320 C7 Connector: Designed for compact, low-power devices. The C7 is narrower than C13/C19 standards, so it's favored by router and appliance makers who need to minimize footprint. Cradlepoint uses this extensively, so if your device has a C7 input, this cord is the direct fit.
- NEMA 1-15 Plug (US Standard): The everyday 110–120V two-prong connector. No special wiring, no regional variants—it plugs into any standard US outlet. This is critical: NEMA 1-15 is US-only. If your deployment includes Canada or Mexico with the same outlet standard, you're fine. Anything else requires a different cord.
- 1.8-Meter (5.9 ft) Length: Enough cable for typical rack or tabletop placement 4–6 feet from the outlet without excess slack. Shorter than a standard C7 extension would be, so it's less prone to being tripped over or pinched in tight spaces—important in server rooms and automation closets.
Deployment Considerations:
- Verify connector type on your Cradlepoint device before ordering. A C13 or proprietary connector will not accept this cord, and forcing a mismatch can damage both the cord and the device.
- This is a passive cable—no surge protection, no filtering, no smart power management. If your site requires redundant power or surge suppression, add a UPS or protected power strip separately.
- Used condition: Inspect for cuts, kinks, or discoloration on the insulation and connectors. A damaged cord can arc or short under load. If it looks worn, replace it rather than risk a fire or equipment damage.
Best suited for IT architects and integrators stocking spare cables for multi-site Cradlepoint deployments. In a remote branch office where downtime is expensive, this cord—kept as a backup—is cheap insurance against a single point of failure.
