TP-Link SG2008P vs Lantronix S2220-1014-NA: Specification Comparison
Both the TP-Link SG2008P and the Lantronix S2220-1014-NA are 8-port managed Gigabit switches aimed at security and small-to-medium network deployments. The SG2008P differentiates itself with a 62W PoE+ budget across all eight ports and cloud-managed Omada SDN integration, while the S2220-1014-NA offers Layer 2 management with fiber backbone capability via a 100BASE-LX10 single-mode SFP uplink. This comparison covers PoE and power delivery, port density and connectivity options, and management platform depth.
In This Guide
- Which switch delivers more usable PoE power and how does each handle power-sensitive camera deployments?
- How do the two switches compare on port configuration, fiber uplink options, and switching capacity?
- What management depth and integration ecosystem does each switch offer?
- Which should you choose: the SG2008P or the S2220-1014-NA?
- Side-by-Side Specs
- FAQ
Which switch delivers more usable PoE power and how does each handle power-sensitive camera deployments?
The SG2008P carries a rated 62W PoE budget shared across all 8 RJ45 ports, supporting both 802.3af (15.4W per port) and 802.3at (30W per port) standards. At 30W per camera, the full budget supports up to two simultaneous 802.3at devices at maximum draw, or up to four at the lower 802.3af ceiling of 15.4W each. The power supply is specified as a 53.5 VDC / 1.31A external adapter.
The S2220-1014-NA provides no PoE capability as stated in the available specifications. No PoE budget, PoE standard, or per-port wattage is listed for this model. Buyers deploying IP cameras or access control panels that require power over the network cable cannot rely on the S2220-1014-NA for that function without separate PoE injectors or a mid-span device.
How do the two switches compare on port configuration, fiber uplink options, and switching capacity?
The SG2008P offers 8 x RJ45 Gigabit Ethernet ports with a stated non-blocking switching capacity of 16 Gbps. No fiber or SFP uplink port is specified in the provided data. Form factor supports both wall and rack mounting, with physical dimensions of 11.6 x 7.1 x 1.7 inches. Internal flash memory is listed at 32 MB.
The S2220-1014-NA provides 8 x 10/100/1000BASE-T RJ45 copper ports plus a 100BASE-LX10 single-mode fiber uplink via SC connector with a stated reach of up to 10 km. This fiber uplink enables long-distance backbone connections to a head-end switch or NVR closet without signal degradation over copper distance limits. No switching capacity figure (Gbps fabric) is provided in the available specifications, nor are dimensions, memory, or a power supply specification listed.
What management depth and integration ecosystem does each switch offer?
The SG2008P is managed via TP-Link's Omada SDN platform, which supports centralized cloud or on-premises controller-based management. This enables network-wide configuration, VLAN segmentation, traffic prioritization, and remote monitoring within the Omada ecosystem alongside other TP-Link Omada access points and routers. Omada SDN compatibility is a material consideration for sites already standardized on TP-Link infrastructure.
The S2220-1014-NA is described as a Layer 2 managed switch with VLAN support, traffic prioritization, and remote monitoring. No named management platform, controller software, or cloud service is identified in the provided specifications. The warranty is stated as 2 years; no warranty term is listed for the SG2008P in the provided data. Buyers requiring integration with a specific third-party management ecosystem should verify S2220-1014-NA compatibility independently, as no SDN or controller pairing is documented here.
Which should you choose: the SG2008P or the S2220-1014-NA?
Our take: The SG2008P is the stronger choice when the deployment requires powering IP cameras or access control devices directly from the switch, while the S2220-1014-NA is the better fit when a long-distance single-mode fiber uplink to a backbone switch or head-end is the primary requirement. The SG2008P delivers a documented 62W PoE+ budget (802.3af/at) and a 16 Gbps switching fabric — figures absent from the S2220-1014-NA's specification set. Conversely, the S2220-1014-NA's 100BASE-LX10 SC fiber port provides up to 10 km single-mode reach, a capability the SG2008P does not offer. The SG2008P also ties into the Omada SDN controller ecosystem; the S2220-1014-NA names no equivalent platform. Choose the SG2008P for PoE-powered edge camera closets on an Omada network; choose the S2220-1014-NA where fiber backbone connectivity over distance is the governing constraint and PoE is not needed.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | TP-Link SG2008P | Lantronix S2220-1014-NA |
|---|---|---|
| Product Type | 8-Port Gigabit Smart Managed Switch | 8-Port Managed Gigabit Switch |
| Management | Layer 2/3 Smart (Omada SDN) | Layer 2 Managed |
| Total Ports | 8 x RJ45 Gigabit | 8 x 10/100/1000BASE-T RJ45 |
| Fiber / SFP Uplink | — | 100BASE-LX10 single-mode (SC), up to 10 km |
| PoE Support | 802.3af / 802.3at | — |
| PoE Budget | 62 W | — |
| Switching Capacity | 16 Gbps | — |
| Power Supply | 53.5 VDC / 1.31 A External Adapter | — |
| Operating Temperature | -40°C to 60°C | — |
| Flash Memory | 32 MB | — |
| Mount Type | Wall; Rack | — |
| Dimensions | 11.6 x 7.1 x 1.7 in | — |
| Connector Types | RJ45 | RJ45 (copper) and SC (fiber) |
| Warranty | — | 2 Years |
| Management Platform | Omada SDN (cloud or on-premises controller) | — |
| Compatible Use Case | Small-to-medium networks | Security infrastructure |
Frequently Asked Questions
Which should you choose: the SG2008P or the S2220-1014-NA?
The SG2008P is the stronger choice when the deployment requires powering IP cameras or access control devices directly from the switch, while the S2220-1014-NA is the better fit when a long-distance single-mode fiber uplink to a backbone switch or head-end is the primary requirement. The SG2008P delivers a documented 62W PoE+ budget (802.3af/at) and a 16 Gbps switching fabric — figures absent from the S2220-1014-NA's specification set. Conversely, the S2220-1014-NA's 100BASE-LX10 SC fiber port provides up to 10 km single-mode reach, a capability the SG2008P does not offer. The SG2008P also ties into the Omada SDN controller ecosystem; the S2220-1014-NA names no equivalent platform. Choose the SG2008P for PoE-powered edge camera closets on an Omada network; choose the S2220-1014-NA where fiber backbone connectivity over distance is the governing constraint and PoE is not needed.
Can either switch power IP cameras without a separate PoE injector?
Only the SG2008P provides built-in PoE, with a 62W budget supporting 802.3af (up to 15.4W per port) and 802.3at (up to 30W per port) devices. The S2220-1014-NA has no PoE capability listed in its specifications, so cameras requiring power over Ethernet would need external injectors or a separate PoE switch when using the Lantronix unit.
Which switch is better suited for connecting a remote camera closet to a central head-end over a long cable run?
The S2220-1014-NA includes a 100BASE-LX10 single-mode fiber uplink via SC connector rated up to 10 km, making it suited for long-distance backbone links where copper Ethernet's 100-meter limit is a constraint. The SG2008P specifies no fiber or SFP uplink port in the provided data, so long-distance fiber backbone connectivity is not a documented capability of that model.
Is the SG2008P or S2220-1014-NA better for a site already using a unified network management platform?
The SG2008P integrates with TP-Link's Omada SDN platform, enabling centralized controller-based management alongside Omada access points and routers — a concrete advantage for Omada-standardized sites. The S2220-1014-NA is described as Layer 2 managed with VLAN and remote monitoring support, but no named management platform or controller software is identified in the available specifications. Buyers should verify S2220-1014-NA management tool compatibility with their existing infrastructure before purchase.
More Network Switch Comparisons
- TP-Link SG2210XMP-M2 vs Ubiquiti USW-FLEX-2.5G-8
- TP-Link SG2210XMP-M2 vs Comnet CNGE8MS
- TP-Link SG2210XMP-M2 vs Lantronix S2220-1014-NA
- TP-Link SG2210XMP-M2 vs TP-Link S4500-8GP
- TP-Link SG2210XMP-M2 vs TP-Link SG2008P
- TP-Link S4500-8GP vs Ubiquiti USW-FLEX-2.5G-8
Network Switch Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.