CyberPower PR2200RT2UC vs CyberPower PR2200RTXL2UC: Specification Comparison
Both the PR2200RT2UC and PR2200RTXL2UC are CyberPower 2U rack/tower line-interactive sine wave UPS units rated at 2200VA/2200W, targeting the same data center and network closet segment. This comparison examines how they differ across input/output electrical characteristics, battery and runtime capability, and management/connectivity features — the three axes that most directly affect installation planning, load protection depth, and remote oversight in a B2B rack environment.
In This Guide
How do the input and output electrical specs differ between these two units?
Both units share a 2200VA/2200W capacity, line-interactive topology, pure sine wave output, and a 47–63 Hz input frequency range. Their input voltage operating window (75–149 VAC) is identical, and both regulate at 120 VAC nominal output. Both carry a power factor of 1.0 and a 2430 J surge suppression rating.
The critical difference is transfer time: the PR2200RTXL2UC specifies a typical transfer time of 4 ms, while the PR2200RT2UC specifies 6 ms. For loads sensitive to switching transients — such as servers running tight tolerances — the 2 ms advantage of the XL model is meaningful. The PR2200RTXL2UC also documents automatic voltage regulation with double-boost and single-buck correction, and an adjustable input voltage range of 70–155 VAC with on-battery output of 100/110/120 VAC ±5%. These specs are not provided for the PR2200RT2UC.
The PR2200RTXL2UC uses a NEMA L5-30P twist-lock input plug and requires a 30 A circuit breaker, indicating it is designed for higher-amperage dedicated circuits. The PR2200RT2UC specifies a 15 A maximum current draw — no plug type or circuit breaker rating is listed for it in the provided specs.
Which unit provides better runtime and battery management?
The PR2200RTXL2UC is the only model with documented runtime figures: 10 minutes at half load and 3.2 minutes at full load. No runtime data is provided for the PR2200RT2UC in the supplied specifications, so a direct numerical comparison cannot be made.
The PR2200RTXL2UC carries 4 × 12V/9Ah sealed lead-acid batteries with a typical recharge time of 3 hours. Battery count, size, chemistry, and recharge time are all absent from the PR2200RT2UC spec sheet, preventing any equivalence claim.
The PR2200RTXL2UC weighs 79.6 lbs (36.11 kg) — a weight consistent with four internal SLA batteries. No weight data is listed for the PR2200RT2UC, so battery complement cannot be inferred indirectly from that source either.
How do the management, connectivity, and warranty terms compare?
The PR2200RTXL2UC documents a full communication stack: USB, serial (1 × RS-232 port), SNMP, EPO (Emergency Power Off), and cloud connectivity. Management software is CyberPower PowerPanel® Business. It carries a 3-year limited warranty and a $400,000 connected equipment guarantee.
The PR2200RT2UC spec sheet references cloud connectivity in the product name but does not enumerate specific communication interfaces, management software, warranty term, or connected equipment guarantee in the provided specifications. Installers requiring confirmed SNMP, EPO, or serial port support should validate those features against the manufacturer's datasheet before specifying this model.
Both units are listed with audible alarms. The PR2200RTXL2UC adds overload protection via a resettable circuit breaker — overload handling is not specified for the PR2200RT2UC. The XL model also provides environmental and safety certification details (UL1778, FCC Class A, CSA C22.2 No 107.3, operating range 32–104 °F, 0–9,843 ft elevation, 0–95% RH) that are absent from the PR2200RT2UC spec sheet.
Which should you choose: the PR2200RT2UC or the PR2200RTXL2UC?
Our take: The PR2200RTXL2UC is the stronger choice when confirmed runtime data, faster transfer time, and full management stack are required. It documents 10 minutes of runtime at half load versus no runtime figure for the PR2200RT2UC, a 4 ms transfer time versus 6 ms, and a complete communication suite (USB, serial, SNMP, EPO, cloud) with PowerPanel® Business software against unconfirmed interface support on the RT2UC. It also backs the load with a $400,000 connected equipment guarantee and a 3-year limited warranty — neither spec appears in the PR2200RT2UC data. The tradeoff is a heavier unit (79.6 lbs) requiring a dedicated 30 A NEMA L5-30P circuit. The PR2200RT2UC may suit installations where a standard 15 A outlet is the only available feed and management depth is handled by an external SNMP card — but buyers must confirm those specs directly with CyberPower, as they are absent here.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | CyberPower PR2200RT2UC | CyberPower PR2200RTXL2UC |
|---|---|---|
| Topology | Line-Interactive | Line-Interactive |
| Capacity (VA) | 2200 VA | 2200 VA |
| Capacity (Watts) | 2200 W | 2200 W |
| Output Waveform | Sine Wave | Sine Wave |
| Power Factor | 1.0 | 1.0 |
| Typical Transfer Time | 6 ms | 4 ms |
| Input Voltage Range | 75–149 VAC | 75–149 VAC |
| Adjustable Voltage Range | — | 70–155 VAC |
| Input Plug / Circuit Breaker | 15 A max (plug not specified) | NEMA L5-30P / 30 A |
| Surge Suppression | 2430 J | 2430 J |
| Outlets (Total / Battery) | 8 / not specified | 8 / 8 |
| Runtime at Half Load | — | 10 min |
| Runtime at Full Load | — | 3.2 min |
| Battery (Qty / Size) | — | 4 × 12V 9Ah SLA |
| Battery Recharge Time | — | 3 Hours |
| Communication Interfaces | Cloud (others not specified) | USB, Serial, SNMP, EPO, Cloud |
| Management Software | — | PowerPanel® Business |
| Noise Level | 52.5 dBA | 57.5 dBA |
| Thermal Dissipation | 135 BTU/hr | 135 BTU/hr |
| Weight | — | 79.6 lbs (36.11 kg) |
| Form Factor | 2U Rack/Tower | 2U Rack/Tower |
| Product Warranty | — | 3-Year Limited |
| Connected Equipment Guarantee | — | $400,000 |
Frequently Asked Questions
Which should you choose: the PR2200RT2UC or the PR2200RTXL2UC?
The PR2200RTXL2UC is the stronger choice when confirmed runtime data, faster transfer time, and full management stack are required. It documents 10 minutes of runtime at half load versus no runtime figure for the PR2200RT2UC, a 4 ms transfer time versus 6 ms, and a complete communication suite (USB, serial, SNMP, EPO, cloud) with PowerPanel® Business software against unconfirmed interface support on the RT2UC. It also backs the load with a $400,000 connected equipment guarantee and a 3-year limited warranty — neither spec appears in the PR2200RT2UC data. The tradeoff is a heavier unit (79.6 lbs) requiring a dedicated 30 A NEMA L5-30P circuit. The PR2200RT2UC may suit installations where a standard 15 A outlet is the only available feed and management depth is handled by an external SNMP card — but buyers must confirm those specs directly with CyberPower, as they are absent here.
Which model do I need if my rack PDU uses a NEMA L5-30P twist-lock input?
The PR2200RTXL2UC specifies a NEMA L5-30P input plug and requires a 30 A circuit breaker, making it the compatible choice for that PDU configuration. The PR2200RT2UC specifies a 15 A maximum current and no plug type is listed in the provided specs, so it is not confirmed for a 30 A twist-lock circuit.
Does the PR2200RT2UC support SNMP for network management?
SNMP support is not listed in the provided PR2200RT2UC specifications. The PR2200RTXL2UC explicitly documents USB, serial, SNMP, EPO, and cloud interfaces with PowerPanel® Business software. Verify SNMP availability for the PR2200RT2UC directly with CyberPower before specifying it in a managed network environment.
How long will either UPS keep a half-loaded rack running during an outage?
Only the PR2200RTXL2UC provides runtime data in the supplied specifications: 10 minutes at half load (1100 W) and 3.2 minutes at full load (2200 W). No runtime figures are listed for the PR2200RT2UC. Consult CyberPower's published runtime curves for the PR2200RT2UC before making a runtime-dependent deployment decision.
More UPS Comparisons
- CyberPower PR2200RTXL2UC vs APC by Schneider Electric SRT2200RMXLA
- CyberPower PR2200RTXL2UC vs APC by Schneider Electric SRT2200XLA
- CyberPower PR2200RTXL2UC vs APC by Schneider Electric SRT2200RMXLA-NC
- CyberPower PR2200RTXL2UC vs APC by Schneider Electric SMT2200I
- CyberPower PR2200RTXL2UC vs CyberPower OL2K2RTHD
- CyberPower PR2200RTXL2UC vs CyberPower OL2200RTXL2U
UPS Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.