Altronix NETWAY4EWPX vs TP-Link SG1005P: Specification Comparison
Both the Altronix NETWAY4EWPX and the TP-Link TL-SG1005P are Gigabit PoE switches designed to power IP cameras and other PoE-capable security devices. They share a common functional role but occupy very different market segments: the NETWAY4EWPX is a managed, outdoor-rated, fiber-uplink unit built for harsh-environment security infrastructure, while the TL-SG1005P is an unmanaged desktop switch intended for small, indoor installations. A buyer evaluating both is most likely comparing cost-versus-capability trade-offs on a security project.
In This Guide
Which switch delivers more PoE power, and what PoE standard does each support?
The Altronix NETWAY4EWPX provides a total PoE budget of 120W across its 4 PoE/PoE+ ports, with dual 60W Hi-PoE capable ports supporting devices up to 802.3at (PoE+). This headroom is specifically relevant for PTZ cameras, pan-tilt mechanisms, and multi-sensor units that draw near or at the 30W PoE+ ceiling.
The TP-Link TL-SG1005P lists a 65W PoE budget across 4 PoE ports. The spec data contains an internal inconsistency: the product type field references PoE+ (802.3at) in one entry while the PoE Power field states 802.3af only. The power supply field separately lists 56W. Buyers should verify the actual per-port standard against the TP-Link datasheet before deploying 802.3at devices. Per-port maximum is not explicitly stated in the provided specs beyond a 30W wattage field.
Net delta: the NETWAY4EWPX carries 120W versus the TL-SG1005P's 65W — an 85% greater aggregate PoE budget — and its Hi-PoE dual-port capability is explicitly spec-confirmed, whereas the TL-SG1005P's PoE standard is internally inconsistent in the provided data.
Which unit is rated for outdoor or harsh-environment deployment?
The Altronix NETWAY4EWPX carries an IP66 and NEMA 4/4X enclosure rating, explicitly listed as outdoor-rated. Its operating storage range spans −40°C to 85°C. The unit integrates a battery charger supporting Altronix backup modules, providing UPS-class continuity for field-deployed switches. Dimensions are 17.53" × 15.3" × 6.67", consistent with a hardened wall- or pole-mount enclosure. Mount options are wall, pole, or rack.
The TP-Link TL-SG1005P is a desktop-form-factor unit with no IP or NEMA rating specified. Operating temperature is listed as 0°C to 40°C in one spec field and −30°C to 70°C in another — an internal inconsistency in the provided data. No enclosure protection rating, no battery backup, and no outdoor mounting provision is listed. Physical dimensions are 3.9" × 3.9" × 1.0", consistent with an indoor desktop device.
For any outdoor or environmentally exposed installation, the NETWAY4EWPX is the only option of the two with a documented enclosure rating. The TL-SG1005P provides no rated weather or dust protection.
What management capability and uplink connectivity does each switch offer?
The NETWAY4EWPX is a Layer 2+ managed switch supporting VLAN segmentation, QoS prioritization, and Spanning Tree Protocol. It is also supervised via Altronix LINQ, enabling remote monitoring of switch and power health within a LINQ-compatible infrastructure. Its fiber uplink is a 1 Gbps SFP port (transceiver sold separately), enabling optical runs that provide both extended distance and electrical isolation between the switch and the upstream network.
The TL-SG1005P is explicitly unmanaged — no VLAN, no QoS, no Spanning Tree, and no remote supervision are available. It offers plug-and-play operation with zero configuration overhead. It includes a documented Extend mode that reduces link speed to 10 Mbps to push PoE range to 250 meters, a useful trade-off on long analog-replacement runs. No fiber uplink port is listed.
For segmented networks, cybersecurity-conscious deployments, or sites requiring remote health monitoring, the NETWAY4EWPX's managed Layer 2+ feature set and LINQ supervision are differentiating capabilities the TL-SG1005P does not provide.
Which should you choose: the NETWAY4EWPX or the SG1005P?
Our take: The NETWAY4EWPX is the stronger choice when the installation requires outdoor deployment, managed networking, fiber uplink, or battery backup continuity. It delivers 120W of PoE budget versus the TL-SG1005P's 65W — a delta of 55W that matters on sites with PTZ cameras or multi-sensor heads. Its IP66/NEMA 4/4X enclosure and −40°C low-end storage rating are spec-confirmed for exposed environments; the TL-SG1005P carries no enclosure protection rating. Layer 2+ management with VLAN, QoS, and LINQ supervision gives integrators network control and remote health visibility the unmanaged TL-SG1005P cannot provide. The TL-SG1005P is appropriate for small, budget-constrained, indoor installations where plug-and-play simplicity matters and environmental exposure, managed features, and backup power are not requirements. Note that the TL-SG1005P's spec data contains internal inconsistencies on PoE standard (802.3af vs. 802.3at) and operating temperature range; verify against the manufacturer datasheet before specifying.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Altronix NETWAY4EWPX | TP-Link SG1005P |
|---|---|---|
| Product Type | Managed PoE+ Switch | Unmanaged PoE Switch |
| PoE Ports | 4 × Gigabit PoE/PoE+ | 4 × Gigabit PoE |
| Total Ports | 4 PoE + 1 SFP Uplink | 5 (4 PoE + 1 standard) |
| PoE Standard | 802.3at (PoE+) | 802.3af per PoE Power field (inconsistent in specs — verify) |
| PoE Budget | 120W | 65W |
| Hi-PoE / Dual 60W Ports | Yes — 2 ports | — |
| Fiber / SFP Uplink | 1 × 1 Gbps SFP | — |
| Switching Capacity | — | 10 Gbps |
| Management | Layer 2+ Managed (VLAN, QoS, STP) | Unmanaged |
| Remote Supervision | Altronix LINQ | — |
| Enclosure Rating | IP66, NEMA 4/4X | — |
| Environment | Outdoor | Indoor desktop |
| Battery Backup Support | Yes — integrated charger | — |
| Mount Options | Wall, Pole, Rack | Desktop (mounting holes listed) |
| Operating Temperature | Storage −40°C to 85°C | 0°C to 40°C (inconsistency in specs — verify) |
| Warranty | Lifetime | — |
Frequently Asked Questions
Which should you choose: the NETWAY4EWPX or the SG1005P?
The NETWAY4EWPX is the stronger choice when the installation requires outdoor deployment, managed networking, fiber uplink, or battery backup continuity. It delivers 120W of PoE budget versus the TL-SG1005P's 65W — a delta of 55W that matters on sites with PTZ cameras or multi-sensor heads. Its IP66/NEMA 4/4X enclosure and −40°C low-end storage rating are spec-confirmed for exposed environments; the TL-SG1005P carries no enclosure protection rating. Layer 2+ management with VLAN, QoS, and LINQ supervision gives integrators network control and remote health visibility the unmanaged TL-SG1005P cannot provide. The TL-SG1005P is appropriate for small, budget-constrained, indoor installations where plug-and-play simplicity matters and environmental exposure, managed features, and backup power are not requirements. Note that the TL-SG1005P's spec data contains internal inconsistencies on PoE standard (802.3af vs. 802.3at) and operating temperature range; verify against the manufacturer datasheet before specifying.
Can either switch power a PTZ camera that draws close to 30W?
The NETWAY4EWPX explicitly supports dual 60W Hi-PoE capable ports and is spec-confirmed for 802.3at (PoE+), making it suitable for high-draw PTZ cameras. The TL-SG1005P's provided specs are internally inconsistent on PoE standard — one field states 802.3af (max 15.4W per port) while another references PoE+. The per-port wattage field lists 30W. Verify against the TP-Link TL-SG1005P datasheet before connecting any device requiring 802.3at power.
Can either switch be installed in an outdoor cabinet or pole mount?
Yes for the NETWAY4EWPX — it carries an IP66 and NEMA 4/4X rating and is explicitly listed as outdoor-rated, with wall, pole, and rack mount options. The TL-SG1005P has no IP or NEMA rating in its provided specs and is a desktop-form-factor device; no outdoor mount provision is listed.
Do I need network management experience to deploy the TL-SG1005P?
No. The TL-SG1005P is an unmanaged switch requiring no configuration — it operates plug-and-play out of the box. The NETWAY4EWPX is a Layer 2+ managed switch with VLAN, QoS, Spanning Tree, and LINQ supervision, which requires network configuration knowledge to utilize those features, though it will also pass traffic without advanced configuration.
More Network Switch Comparisons
- Vivotek GET-083A-120 vs TP-Link SG1005P
- Vivotek GET-083A-120 vs Axis T8504-E
- Vivotek GET-083A-120 vs Axis D8004
- Vivotek GET-083A-120 vs Ubiquiti N-SW
- TP-Link SG1005P vs Axis T8504-E
- TP-Link SG1005P vs Axis D8004
Network Switch Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.