Installation Hardware & Kits
Sub categories
Showing Results for Installation Hardware & Kits
-
Code Blue
SKU: 44022
Code Blue 44022 Strobe Guard Kit CB5 Series
PoE-powered LED strobe kit for Code Blue CB5 Series systems
- IP56-rated design handles indoor and protected outdoor moisture/dust
- Standard PoE (802.3af) power eliminates separate infrastructure needs
- Operates reliably across -40°F to +158°F temperature range
$110.00 $109.99 Save $0.01The item has been added -
Code Blue
SKU: CB6S00163
Code Blue CB6S00163 BSL RAs NP 24v Relay Module
- Operates on 24V DC, fitting cleanly into standard low-voltage security panel power supplies.
- Functions as a switching interface for paging amplifiers and audio distribution equipment.
- Drop-in replacement component maintains compatibility with existing Code Blue system installations.
$750.00 $649.99 Save $100.01The item has been added -
Code Blue
SKU: SLNF0073
Code Blue SLNF0073 Premium Solar Safety Blue Light
PoE + solar safety light rated IP68 for harsh outdoor deployments
- IP68 dust and water submersion protection for coastal, industrial, and high-moisture sites
- PoE (802.3af) powered with solar capability for flexible network infrastructure integration
- Blue safety light sealed for outdoor warning systems and security perimeter installations
$12,102.99The item has been added -
Code Blue
SKU: SLNF0115
Code Blue SLNF0115 Premium Solar Safety Light
Solar + PoE safety light with IP68 rating for perimeter security
- IP68-rated polycarbonate lens withstands full dust and water immersion
- Dual power via solar and PoE (802.3af) eliminates dedicated wiring
- Salt spray and moisture resistant for harsh outdoor environments
$8,475.00 $7,748.99 Save $726.01The item has been added -
Code Blue
SKU: SLNF0159
Code Blue SLNF0159 Safety Emergency Light
Dual-sided PoE emergency light with IP68 rating for networked safety
- PoE (802.3af) powered—no dedicated electrical runs required for install
- Dual-sided white illumination delivers 360° visibility in emergencies
- Wall, ceiling, and pole mounting compatible for flexible deployment
$6,420.00 $5,336.99 Save $1,083.01The item has been added -
Code Blue
SKU: SLNF0194
Code Blue SLNF0194 PoE Emergency Light Gloss Black
PoE emergency light with IP68 rating for indoor/outdoor security integration
- PoE (802.3af) powered—no separate electrical infrastructure required
- IP68 rated for wet, dusty, and harsh outdoor environments
- Mounts to walls, poles, or enclosures; integrates with IP networks
$9,370.00 $8,112.99 Save $1,257.01The item has been added -
Code Blue
SKU: SLNF0218
Code Blue SLNF0218 Premium Solar Safety Light
IP68 solar + PoE safety light for outdoor security perimeter duty
- Dual power: solar + PoE (802.3af) for flexible deployment in remote areas
- IP68 dust and water tight rating handles harsh outdoor environments year-round
- Safety blue clear design maximizes visibility for security applications
$11,995.00 $10,282.99 Save $1,712.01The item has been added -
Code Blue
SKU: SLNF0342
Code Blue SLNF0342 PoE Emergency Light
PoE emergency light with IP68 rating, no electrical runs needed
- PoE (802.3af) powered—skip dedicated electrical infrastructure entirely
- IP68 waterproof rating handles indoor and outdoor wet environments
- Compact form factor for emergency egress marking and wayfinding placement
$8,965.00 $7,761.99 Save $1,203.01The item has been added -
Code Blue
SKU: SLNP0133
Code Blue SLNP0133 Premium Solar Retrofit Kit
- Retrofit solar power into existing Code Blue installations without replacing hardware.
- Supports 12–24V DC operation, accommodating varied system power configurations.
- Classified as an expansion module, enabling independent off-grid uptime for security systems.
$6,466.99The item has been added -
Code Blue
SKU: Z15984-03
Code Blue Z15984-03 S-1000 LED Combo Strobe White/Clear
PoE-powered LED combo strobe with IP68 rating for outdoor alerts
- IP68-rated housing withstands wet and dusty outdoor environments
- PoE (802.3af) power eliminates separate wiring during installation
- Combo strobe unit integrates visual and audible signaling in one device
$435.00 $397.99 Save $37.01The item has been added -
Comelit
SKU: 909021753
Comelit 909021753 Readykey Controller Retrofit Kit
PoE+ retrofit controller for Comelit access control & ONVIF systems
- PoE+ (802.3at) power eliminates separate power runs, simplifying mixed upgrades.
- Bridges legacy Comelit readers to IP architecture without replacing installed hardware.
- ONVIF compliance ensures integration with standard-based VMS platforms out of the box.
$141.61 $140.99 Save $0.62The item has been added -
Digi International
SKU: 76002084
Digi International 76002084 WR54 Accessory Kit - Single Cellular
Single cellular module kit for WR54 industrial routers—remote sites & failover
- WR54 accessory kit for single cellular deployments
- Mounting and antenna components in one kit
- 4.5 lb bundle for industrial router installs
$521.00 $478.99 Save $42.01The item has been added -
Digi International
SKU: 76002113
Digi International 76002113 IX30 Accessory Kit
Essential accessory kit for Digi IX30 industrial cellular router deployment
- Dedicated accessory kit for the Digi IX30 cellular router platform
- Includes deployment components in a 10.5 x 8.0 x 2.2 in package
- 5-year warranty backs cellular install longevity in field cabinets
$225.00 $206.99 Save $18.01The item has been added -
Digi International
SKU: 76002136
Digi International 76002136 TX40 5G Accessory Kit
Complete mount and cable kit for Digi TX40 5G router deployment
- Accessory kit extends Digi TX40 5G mobile router functionality
- Includes mounting hardware, cables, and connector components
- Compact 8.0 x 6.0 x 4.0 in kit at 2.3 lbs with 5-year warranty
$707.00 $648.99 Save $58.01The item has been added -
Digi International
SKU: 76002137
Digi International 76002137 TX40 Accessory Kit
Complete accessory kit for TX40 system installation and field deployment
- Accessory kit for Digi TX40 security and networking infrastructure
- Compact 9.0 x 3.0 x 8.0 in transport size at 1.0 lbs for field techs
- 5-year warranty covers TX40 installation accessory components
$529.00 $485.99 Save $43.01The item has been added -
Add to Cart The item has been added
Digi International
SKU: 76002147
Digi International 76002147 IX 5G Accessory Kit
IP55 accessory kit for Digi IX 5G industrial routers and gateways
- Accessory kit supports 5G cellular IoT installations
- -20C to 70C operating range for harsh-environment deployment
- UL/CSA, CE, GS, UKCA, SAA certifications for global compliance
$132.23 $131.99 Save $0.24The item has been added
Installation Hardware & Kits
Installation hardware and kits provide the job-ready components needed to mount, secure, and complete commercial surveillance, access control, and intercom deployments. Standardizing installation parts helps speed up installs and supports consistent long-term serviceability.
Plan Your Deployment
- Mounting surface type and hardware compatibility
- Indoor vs outdoor durability requirements
- Standardization across sites and install teams
- Serviceability and replacement part planning
- Project staging and kit-based installation efficiency
Installation Hardware & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 48 working models of installation hardware & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 5MP, 20MP+, 2MP, 8MP |
| IP Rating | IP68, IP56 |
| Connectivity | Wired |
| Power | PoE |
| Type | Controller, Station Adaptors, LED Beacon/Strobe, Custom/Special Order Unit, Accessories, Lock/Strike, Relays and Control Units |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.