IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
SDC

SKU: 482A4U

SDC 482A4U Square Push Plate Switch SPDT Controller

Wired 28VDC controller for up to 63 doors with OSDP + TCP/IP
- Manages 250,000 user credentials across DESFire, MIFARE, NFC, and 125kHz Prox
- SPDT relay logic handles both unlock and controlled-access strike scenarios
- OSDP and TCP/IP networking integrates with centralized security platforms
In stock · Ships same business day

$116.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 482A6RU

SDC 482A6RU Round Push Plate Switch SPDT Controller

28VDC round push plate controller for up to 63 doors and 250K users
- SPDT switching with OSDP and TCP/IP for standards-based access control
- Supports DESFire, MIFARE, NFC 13.56MHz, and 125kHz proximity credentials
- Enterprise-scale capacity: 250,000 maximum user credentials across 63 doors
Special Order · Ships in 2-3 weeks

$91.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 482O1U

SDC 482O1U Narrow Push Plate SPDT Controller

Multi-door narrow push plate controller, 63 doors, 250K credentials
- Supports DESFire, MIFARE, NFC, and 125kHz proximity credentials
- OSDP and TCP/IP connectivity for standard access control integration
- Operates at 28VDC with SPDT strike output for door control
Special Order · Ships in 2-3 weeks

$70.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 482O2U

SDC 482O2U Single Gang Push Plate Switch Controller

Single-gang push plate controller for 63 doors with multi-credential support
- Supports 125kHz proximity, DESFire, MIFARE, and NFC credentials on one device
- Stores 250,000 user profiles locally; operates via OSDP and TCP/IP networking
- 28VDC wired operation scales across warehouses, offices, and multi-floor sites
In stock · Ships same business day

$196.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 482O4U

SDC 482O4U Square Push Plate Switch SPDT Controller

28VDC SPDT controller for up to 63 doors with 250K credential capacity
- Supports DESFire, MIFARE, NFC 13.56 MHz, and 125 kHz proximity cards
- OSDP and TCP/IP connectivity for integration with standard platforms
- Manages 250,000 user credentials across multi-door enterprise deployments
Special Order · Ships in 2-3 weeks

$76.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 492

SDC 492 Emergency Door Release Controller

63-door controller with emergency pull-station override and multi-credential support
- Manages up to 63 doors per controller at 30VDC with DESFire, MIFARE, NFC, and 125kHz proximity cards
- Stores 250,000 user credentials for enterprise-scale deployments with minimal turnover management
- OSDP and TCP/IP connectivity for integration into distributed access control architectures
In stock · Ships same business day

$120.99 $115.99 Save $5.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 492WP

SDC 492WP Weather-Proof Pull Station Controller

IP-rated outdoor pull station with NFC/proximity reader and OSDP
- Dual NFC and 13.56MHz proximity reader accepts both card types
- OSDP protocol with encrypted communication and real-time device health
- 30VDC operation with weather-proof enclosure for direct rain exposure
In stock · Ships same business day

$272.99 $245.99 Save $27.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 602RF

SDC 602RF 1 AMP DC Power Controller

1 AMP 24VDC controller for proximity, keypad, and NFC readers via OSDP
- OSDP protocol standard integration with proximity cards, keypads, NFC/13.56MHz
- 1 AMP output at 24VDC for single-door and multi-door access control systems
- Wired connectivity in compact 12" × 12" × 4" form factor for reader deployment
In stock · Ships same business day

$302.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 602RFA

SDC 602RFA 1 Amp Regulated Power Supply

24VDC 1-amp regulated supply for SDC multi-door access control
- Supports up to 63 doors and 250,000 users on single controller
- Compatible with DESFire, MIFARE, NFC, and 125kHz proximity credentials
- Works with OSDP and TCP/IP SDC access control systems
Special Order · Ships in 2-3 weeks

$356.99 $341.99 Save $15.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 631RFA

SDC 631RFA 1.5 AMP 12/24VDC Power Supply

1.5A controller for up to 63 doors with 250K credential support
- Manages 63 doors across multi-building deployments with single 12/24VDC supply
- Supports DESFire, MIFARE, NFC, and 125kHz Prox readers in mixed configurations
- Integrates via OSDP and TCP/IP for standard access control platforms
Special Order · Ships in 2-3 weeks

$350.99 $335.99 Save $15.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 631RFUR-1

SDC 631RFUR-1 1.5-Amp 24VDC Power Supply Controller

24VDC 1.5-amp power supply controller for HID access systems
- 1.5-amp rating supports single and multi-door installations
- Compact modular design fits retrofit and new construction deployments
- 24VDC operation compatible with HID credential-based access control
Special Order · Ships in 2-3 weeks

$379.99 $362.99 Save $17.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 632RF

SDC 632RF 220V 2-Amp Power Supply Controller

220V controller with 2A regulated 24VDC output for mid-scale access systems
- Powers proximity, keypad, and NFC/13.56MHz readers with stable 24VDC regulation
- OSDP protocol support isolates credential data from network traffic
- Single 2-amp supply eliminates multiple power distribution runs across entry points
In stock · Ships same business day

$335.99 $321.99 Save $14.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 632RFA

SDC 632RFA 2 Amp Class 2 Access Controller

63-door Class 2 controller with 250K credential capacity
- Manages up to 63 doors simultaneously on single 24VDC 2A output
- Stores 250,000 user credentials without splitting databases across units
- Reads DESFire, MIFARE, NFC (13.56 MHz), and 125 kHz proximity cards
In stock · Ships same business day

$652.00 $372.99 Save $279.01

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 7000-DGK

SDC 7000-DGK Laser Guided Drill Fixture

Laser-guided drill fixture for SDC 4-door access control installation
- Precision hole alignment reduces measurement error during hardware setup
- Compatible with SDC systems supporting HID readers and OSDP/TCP/IP
- Handles deployments with up to 250,000 user credentials across doors
Special Order · Ships in 2-3 weeks

$571.99 $546.99 Save $25.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 701U

SDC 701U Key Switch Controller 6AMP 630

6AMP key switch controller with OSDP for mixed credential readers
- 6AMP @ 630 rating handles standard electromagnetic and mechanical locks
- OSDP protocol works with proximity, NFC, and keypad inputs
- Wired RS-485/Wiegand connectivity operates as slave device to main panel
In stock · Ships same business day

$79.99 $76.99 Save $3.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 705UL2

SDC 705UL2 DPDT Key Switch Access Controller

DPDT key switch controller with OSDP and NFC/13.56MHz credential support
- Dual-pole dual-throw relay configuration for 630-class strike integration
- OSDP protocol communication for networked access control systems
- Proximity reader and keypad interface options for flexible authentication
Special Order · Ships in 2-3 weeks

$114.99 $102.99 Save $12.00

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

SDC 482A4U Square Push Plate Switch SPDT Controller

SDC 482A6RU Round Push Plate Switch SPDT Controller

SDC 482O1U Narrow Push Plate SPDT Controller

SDC 482O2U Single Gang Push Plate Switch Controller

SDC 482O4U Square Push Plate Switch SPDT Controller

SDC 492 Emergency Door Release Controller

SDC 492WP Weather-Proof Pull Station Controller

SDC 602RF 1 AMP DC Power Controller

SDC 602RFA 1 Amp Regulated Power Supply

SDC 631RFA 1.5 AMP 12/24VDC Power Supply

SDC 631RFUR-1 1.5-Amp 24VDC Power Supply Controller

SDC 632RF 220V 2-Amp Power Supply Controller

SDC 632RFA 2 Amp Class 2 Access Controller

SDC 7000-DGK Laser Guided Drill Fixture

SDC 701U Key Switch Controller 6AMP 630

SDC 705UL2 DPDT Key Switch Access Controller

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service