Camden

SKU: CX-1000/77

Camden CX-1000/77 Electric Strike

• Fail-secure 24VDC design keeps door locked on power loss or panel fault.
• SPDT relay input requires no firmware, VMS, or network integration to deploy.

Camden

SKU: CX-1085M

Camden CX-1085M Pneumatic Timer for Push Buttons

Pneumatic timer for push-button door control with TCP/IP integration

• Time-delay control for electromagnetic locks and strike mechanisms
• TCP/IP networked integration with access control systems
• Works in new installations and retrofit applications, –4°F to 120°F

Camden

SKU: CX-12Plus

Camden CX-12Plus TCP/IP Door Interface Relay

TCP/IP relay for 2-door magnetic lock control over standard network

• Controls 2 doors simultaneously with 12V or 24V DC magnetic strikes
• TCP/IP protocol integrates with any modern access control system
• Network-based architecture eliminates need for proprietary local panels

Camden

SKU: CX-247-12

Camden CX-247-12 7-Day Timer Lock Strike

• TCP/IP communication enables remote schedule management from any networked control station.
• 7-day programmable schedule supports per-day unlock windows without hardware reconfiguration.
• 12V DC operation integrates directly with existing low-voltage access control power supplies.

Camden

SKU: CX-247-24

Camden CX-247-24 7-Day Timer Lock Strike

• 15 independent 7-day schedules with 16 on/off events each eliminate server dependency.
• 20A relay contacts at 30VDC handle dual mag-locks or high-inrush door operators reliably.
• Battery-backed memory preserves all schedules through power loss; no re-programming needed.

Camden

SKU: CX-33

Camden CX-33 Advanced Logic Relay Controller

• Controls up to 3 independent doors from one 24VDC controller, cutting wiring complexity.
• Native keypad reader support eliminates card enrollment overhead on small deployments.
• Backup battery connector enables fail-secure lock-down mode during power loss events.

Camden

SKU: CX-90S-03

Camden CX-90S-03 300 lbs. Magnetic Lock Surface Mount

300 lbs magnetic lock, surface mount, TCP/IP networked control

• 300 lb hold strength magnetic strike for single or multi-door deployments
• TCP/IP network communication integrates with centralized access control systems
• Surface-mount design installs on existing doors without conduit modifications

Camden

SKU: CX-95S-3E

Camden CX-95S-3E Magnetic Door Holder Extension Bar 3"

• Adds 3" offset between magnet and armature for heavy-frame or retrofit door installs.
• Passive mechanical component — no additional wiring or power draw on the parent CX-95S unit.
• Compatible with CX-95S-DH and CX-95S-DH-FL across 12/24V AC/DC and 120V AC configurations.

Camden

SKU: CX-95S-7E

Camden CX-95S-7E Magnetic Door Holder Extension Bar 7"

• 7-inch standoff resolves frame depth or strike alignment issues in tight door assemblies.
• Compatible with CX-95S-DH surface and CX-95S-DH-FL floor mount base units at 12/24V AC/DC or 120V AC.
• No separate power required — extension bar draws power directly from the parent door holder magnet.

Camden

SKU: CX-95S-7E-BK

Camden CX-95S-7E-BK Magnetic Door Holder Extension Bar 7"

• Offsets electromagnet 7 inches to resolve frame geometry conflicts in retrofit installs.
• Compatible with Camden CX-95S-DH holders; no frame rework or new holder model required.
• 3-year warranty; black finish suits standard commercial door hardware aesthetics.

Camden

SKU: CX-95S-DH-BK

Camden CX-95S-DH-BK Magnetic Locks

• Delivers 35 lbs holding force at 24V AC/DC for reliable fail-safe door control.
• Accepts 12/24V AC/DC or 120V AC — fits existing relay outputs without added hardware.
• Low 30–57 mA draw integrates without overloading standard 24V relay or PoE supplies.

Camden

SKU: CX-95S-DH-FL

Camden CX-95S-DH-FL Magnetic Door Holder Floor Mount

• Accepts 12V or 24V DC and 120V AC inputs for flexible panel integration.
• Adjustable armature plate corrects minor frame misalignment during commissioning.
• Releases door on command from any access control panel that supplies required voltage.

Camden

SKU: CX-CL-GLMNT

Camden CX-CL-GLMNT Glass Mount Kit

• Mounts the CX-EPD0009 magnetic cabinet lock securely on standard glass doors.
• Includes 3M Vinyl Tape 471 and safety glass wipe — no additional adhesives to source.
• Two 6-32 nylon insert lock nuts provide a mechanical fastening point at the stud plate.

Camden

SKU: CX-CL-LZBRK

Camden CX-CL-LZBRK L&Z Magnetic Lock Bracket

• L and Z magnetic lock bracket for 600 lb mag lock strike assemblies
• Dual-plane design accommodates both vertical and horizontal install
• Drops onto outswing and inswing door geometries without modification

Camden

SKU: CX-DE1200-B1

Camden CX-DE1200-B1 15 Second Fixed Exit Delay

• Controls up to 4 doors from a single TCP/IP-networked controller, cutting installation overhead.
• 15-second fixed exit delay supports emergency egress compliance across all coordinated door strikes.
• 24VDC operation with proximity reader compatibility eliminates additional decoder hardware at each door.

Camden

SKU: CX-DE1200-B2

Camden CX-DE1200-B2 30 Second Fixed Exit Delay

• Controls exit delay sequencing across up to 4 doors from a single 24VDC unit.
• Fixed 30-second delay ensures consistent, repeatable egress timing on every cycle.
• Compatible with proximity readers and magnetic locks for straightforward integration.