Camden · CM-221M/46N

Camden ValueWave™ SS Narrow faceplate 12/24VDC 1 - CM-221M/46N

Hands-free infrared exit switch built for ADA-compliant automatic door control and access control integration

• Active IR microburst sensor enables hands-free exit triggering without physical contact.
• Dry-contact N.O./N.C. relay (1A @ 30VDC) integrates with strikes, operators, and panels.
• Narrow 4.5"×1.75" jamb-mount profile fits tight frames where single-gang boxes won't seat.

Camden · CM-221/A42N

Camden ValueWave™ Touchless Switch Narrow (Jamb) - CM-221/A42N

Narrow jamb-mounted touchless switch designed for electromagnetic lock integration in high-traffic access control applications

• IP65-rated enclosure withstands dust, rain, and washdown without degradation.
• Form C relay (NO/NC/COM, 1A) integrates directly with EM locks and access relays.
• Sensor range adjusts 2–8 in. and time delay spans 0.5–20 sec for site tuning.

Camden · CM-CPC1

Camden Vandal and weather resistant clear lift cover

Clear lift cover for outdoor keypad readers with vandal protection

• Transparent design maintains keypad visibility while blocking weather and impact
• Wall-mounted TCP/IP keypad cover compatible with HID credential systems
• Outdoor-rated construction protects access points in high-traffic entry areas

Camden · CM-324

Camden Wired Touchless Switch economical 1 Relay no - CM-324

Line-powered, wired touchless switch designed for economical single-relay door activation in access control installations

• Onboard Form C relay (5A @ 30 VDC) drives strikes and solenoids directly—no add-on modules.
• Adjustable 1–26" sensing range with 100 ms response minimizes nuisance triggers at each door.
• Runs on 12–24 VDC across −4°F to +153°F, suiting retrofit and new-build commercial installs.

Camden · CX-ESF-4

Camden Wood Frame Face Plate for CX-ED1309 brushed - CX-ESF-4

Brushed aluminum face plate designed as a finish trim for the CX-ED1309 electromagnetic strike

• Brushed aluminum trim conceals mounting gaps on wood frame CX-ED1309 installations.
• Direct compatibility with CX-ED1309 strike requires no wiring or power supply changes.
• Flat-mount design aligns to existing strike holes, minimizing rework during finishing.

Camden · CX-ESF-4BZ

Camden Wood Frame Face Plate for CX-ED1309 dark - CX-ESF-4BZ

Dark bronze wood frame face plate engineered as a finished trim component for the CX-ED1309 magnetic lock

• Dark bronze factory finish matches CX-ED1309 hardware for a consistent door trim spec.
• Designed exclusively for CX-ED1309 magnetic lock; not compatible with CX-91S or CX-92S.
• Covers strike mounting edges on wood frames, reducing moisture ingress risk at the frame.

Camden · CM-PT250-12

Camden Zamac endcaps, 12” length (Formerly CM-PTS14)

12" zamac endcaps for access control door hardware installations

• Zamac construction resists corrosion in standard indoor environments
• 12-inch length fits standard door opening frame assemblies
• Includes mounting screws, anchor plugs, and cable connectors

Code Blue · 40087

Code Blue 40087 LED Beacon Strobe Light Blocker

Compact LED beacon strobe designed for access control systems, perimeter intrusion detection, and security cabinet status indication

• Up to 375 flashes/min cuts through high-noise environments for instant breach recognition.
• IP56 + -40°F to +158°F range enables outdoor pole or unheated warehouse mounting without weatherproofing.
• Cabinet, pole, and wall mount compatibility at 2.2 lbs requires no structural reinforcement.

Code Blue · 40117

Code Blue 40117 S-1000 LED Combo Strobe Light Retro

PoE-powered LED strobe light with IP56 weather protection for outdoor alerts

• IP56-rated design withstands dust and water in continuous outdoor deployments
• PoE (802.3af) power eliminates dedicated electrical runs for simpler installation
• Integrates directly with PoE switches and IP-based security system infrastructure

Code Blue · 40197

Code Blue 40197 S-50 Strobe Light Assembly

PoE strobe light assembly for outdoor security and emergency signaling

• IP56-rated weatherproofing handles dust and water exposure in outdoor installations
• 802.3af PoE power eliminates separate power runs for simplified deployment
• 20MP+ sensor resolution captures high-detail documentation for security events

Code Blue · CB5P00022

Code Blue CB5P00022 Sylence Backlit Keypad

Backlit keypad replacement part designed for use with Code Blue paging amplifier systems

• Operates at 24V DC, compatible with dual-voltage paging amplifier installations.
• Backlit keys ensure reliable use in low-light or low-visibility deployment areas.
• Direct replacement part for Code Blue paging amplifiers, minimizing swap-out time.

Code Blue · CB5P00039

Code Blue CB5P00039 Emergency Two-Sided Strobe Light

Two-sided strobe light, IP68-rated, PoE-powered for outdoor emergency alerting

• IP68 fully sealed design operates in wet locations and harsh outdoor weather
• PoE (802.3af) power eliminates separate infrastructure at installation point
• Two-sided coverage for 360° emergency notification across perimeter security zones

Code Blue · CB9S00061

Code Blue CB9S00061 Power Line Strobe Light

PoE-powered IP68 strobe light for industrial security signaling

• PoE 802.3af power eliminates separate AC/DC runs, simplifying remote deployments.
• IP68 and NEMA 4 ratings handle full dust ingress, washdown, and direct weather exposure.
• UL 62368-1, NEMA 4, and ADA certifications satisfy compliance requirements across site types.

Comelit · 7257710

Comelit 7257710 Architect One RFID Mullion Reader

RFID mullion reader for Comelit Architect One door access systems

• Fits door frames and glass mullions at 42×112×22mm with no surface projection.
• Reads PAC HF cards up to 60mm and accepts NFC mobile credentials natively.
• Built-in accelerometer reports tamper events to the Architect One controller in real time.

Comelit · 909020110

Comelit 909020110 GS3-LF Mullion Proximity Reader

Mullion proximity reader with 4MP and PoE+ for access control

• 2560×1440 (4MP) capture supports forensic review and cardholder verification at the door.
• PoE+ (802.3at) delivers power and data over one cable, eliminating dedicated electrical runs.
• Mullion mount form factor fits tight door-frame geometry where face-mount readers won't clear hardware.

Comelit · 909020111

Comelit 909020111 GS3-LF Proximity Reader

Proximity reader with 4MP video capture and PoE+ power

• 4MP (2560×1440) onboard capture ties visual identity to each RFID access event.
• PoE+ (802.3at) delivers power and data over one cable, eliminating 24V DC runs.
• IP65-rated polycarbonate housing supports sheltered outdoor and wash-down installs.

Comelit · 909020112

Comelit 909020112 GS3-MT Mullion Proximity Reader

Mullion proximity reader with 4MP imaging and PoE+ power

• 4MP (2560×1440) sensor captures cardholder identity at credential presentation for audit trails.
• PoE+ (802.3at) powers the reader over a single Ethernet run—no dedicated 12V door wiring needed.
• Reads PAC RFID, PAC OPS™, KeyPAC, and 125 kHz LF/HF cards via one Wiegand interface.

Comelit · 909020113

Comelit 909020113 GS3-MT Standard Proximity Reader

PoE+ proximity reader with 4MP for IP-based access control

• Handles PAC OPS™, KeyPAC, and third-party Wiegand credentials on a single reader.
• PoE (802.3af) consolidates power and data on one cable run; verify 13W minimum per port.
• IP65-rated polycarbonate housing supports indoor and outdoor deployments without covers.

Comelit · 909020114

Comelit 909020114 GS3-MT Proximity Reader

PoE+ proximity reader with PIN entry for mixed-credential access control

• PoE+ (802.3at) power runs over Cat5e/Cat6, eliminating separate 12V supplies.
• PIN keypad plus proximity card in one unit standardizes hardware across mixed-credential sites.
• IP65-rated UL polycarbonate housing supports protected exterior and vestibule installs.

Comelit · 909020116

Comelit 909020116 GS3-LF Vandal Resistant Proximity Reader

Vandal-resistant proximity reader with 4MP and PoE+ for secure access

• Grade 304 stainless steel with IP67 rating handles outdoor and wet environments.
• PoE+ (802.3at) at 15.4W eliminates separate power runs; single Cat6 cable suffices.
• Red/green LED indicators and audible sounder provide immediate credential feedback.

Comelit · 909020251/2.00

Comelit 909020251/2.00 Keypac Proximity Key Fob

Biometric fingerprint credential designed for secure access control systems requiring identity verification beyond standard proximity cards

• Biometric fingerprint key fob with HID credential format
• Non-transferable identity - one finger cannot open another person's fob
• Native HID compatibility for existing reader infrastructure

Comelit · 909020256

Comelit 909020256 K3010 Proximity Key Fob 10-Pack

125 kHz RFID key fobs 10-pack for standard access control systems

• Operates at 125 kHz, integrating with existing reader infrastructure without converters.
• 10-fob bundle accelerates credential provisioning across multi-tenant or warehouse deployments.
• Each fob is independently programmable for per-user or per-zone access assignment.

Comelit · 909021017/2.00

Comelit 909021017/2.00 Keypac Proximity Card Reader

Proximity card reader designed for access control systems requiring credential-based authentication at entry points

• Proximity card reader for Comelit Keypac access control
• Sub-second prox credential read at high-traffic access points
• Native Comelit Software 6 management platform integration

Comelit · 909021023

Comelit 909021023 Proximity Key Fob (D8238)

PoE+ proximity key fob for Comelit access control systems

• 802.3at PoE+ power eliminates battery replacements and credential downtime.
• Proximity key fob form factor enables hands-free access at readers and panels.
• D8238 variant ID ensures consistent pairing and replacement across multi-node deployments.

Comelit · 909030055

Comelit 909030055 PAC 512 DC Two-Door Access Controller

Two-door access controller with PoE+ power for rack-mount installations

• Controls two independent door channels, each with isolated relay output and status monitoring.
• PoE+ (802.3at) powered over Ethernet—no separate DC supply or AC outlet needed at rack location.
• 19-inch rack-mount form factor co-locates cleanly with switches, NVRs, and core infrastructure.

Comelit · 909030155

Comelit 909030155 PAC 512 DCI Two-Door Access Controller

Rack-mount two-door controller with PoE+ for distributed access

• Controls two independent access points from one rack-mount module, cutting install labor.
• PoE+ (802.3at) powered — no separate 12/24VDC supply needed at the controller location.
• Fits standard 19-inch racks, centralizing access logic alongside network and AV infrastructure.

Comelit · KVU8509

Comelit KVU8509 4MP IP Video Intercom with Keypad and Gateway

4MP IP intercom with keypad and gateway for access control entry points

• 2560×1440 resolution captures facial detail and scene context at entry points.
• PoE-powered wall-mount eliminates separate power runs at gates or lobbies.
• Integrated keypad and gateway bundle reduces panel count for PIN-based access control.

Comelit · UT9279M

Comelit UT9279M Numerical Keypad Module

Numerical keypad with 4MP video and PoE+ for IP access control

• PoE+ (802.3at) single-cable power, no 12V auxiliary run needed
• Numerical keypad module with integrated 4MP (2560x1440) video
• Wall-mounted credential entry for Ultra entrance panel install

Comelit · VVDS-IP

Comelit VVDS-IP Ez-Pack A/V Vandalcom Digital Keypad

Vandal-resistant 2MP digital keypad for Comelit IP access control

• 1080p (2MP) digital keypad with vandal-resistant outdoor housing
• Rack-mount endpoint for Comelit IP access-control deployments
• Integrates with IP-based audio/visual entrance communication

Compulocks · 505B209SWLB

Compulocks 10/11 Gen iPad Enclosure - 505B209SWLB

Swell enclosure with the BOW tilting wall mount in a single black kit engineered for permanent iPad deployments in commercial environments

Compulocks · 159B124GAPXB

Compulocks 159B124GAPXB 12.4IN Apex Enclosure Flex ARM

N Apex enclosure with a flexible articulating arm mount, purpose-built for securing Samsung Galaxy Tab S9+ and S9 FE+ 12.4-inch tablets in commercial

Compulocks · 201MPMIP109

Compulocks 201MPMIP109 iPad 10/11 Gen Wall Mount

Wall-mount solution purpose-built for the iPad 10th and 11th generation (A16 chip) in commercial and enterprise deployments

Compulocks · 159B11GAPX9B

Compulocks Galaxy TAB A9+ Enclosure - 159B11GAPX9B

Security enclosure designed to house and protect a Samsung Galaxy Tab A9+ tablet

Compulocks · 505B80GAPXB

Compulocks Galaxy TAB Active 3/5 Wall Mount - 505B80GAPXB

Robust, tilting wall mount designed specifically for the Samsung Galaxy Tab Active 3 and 5 tablets

Compulocks · 505B124GAPXB

Compulocks Galaxy TAB S9+/S9FE+/S10+ Wall Mount - 505B124GAPXB

Dedicated wall mount designed to securely house specific Samsung Galaxy tablet models

Digital Watchdog · DW-DTPIRIPW

Digital Watchdog DW-DTPIRIPW Outdoor PIR Motion Detector

Weatherproof passive infrared (PIR) motion detector engineered for outdoor perimeter security, parking-lot monitoring, and intrusion detection in

• Outdoor PIR motion detector with passive infrared sensing
• Weatherproof housing rated for rain, dust, and temperature swings
• Reduces false triggers from trees, shadows, and light flicker