Lifesafety Power · C4-BOXED

Lifesafety Power C4-BOXED Lock output module 4 outputs fused

Compact four-channel output module designed to distribute supervised 12VDC power to access control hardware from a centralized logic platform

• Four independent 3A fused outputs prevent a single lock fault from disrupting other circuits.
• Supports mixed failsafe and fail-secure modes per output within the same installation.
• FAI-rated for fire alarm interface compatibility, meeting code requirements in life-safety deployments.

Lifesafety Power · C4P-BOXED

Lifesafety Power C4P-Boxed Flexpower C4/C4P C8/C8P

4-output lock control expansion module designed to add access control capacity to existing Lifesafety Power FlexPower supply systems

• Adds 4 independently programmable lock outputs to existing FlexPower systems.
• Each output configurable for 12V or 24V, supporting mixed-voltage lock deployments.
• Per-output fail-safe or fail-secure mode simplifies fire code and egress compliance.

Lifesafety Power · C8-BOXED

Lifesafety Power C8-BOXED Relay Lock Control - 4 Output

Relay-based access control output module designed to switch power to electronic locks, magnetic locks, and door strikes on distributed door control

• 8 isolated relay outputs switch locks at independent doors without signal bleed-through.
• Dry contact inputs accept 5–24VDC logic from any access panel—no active driver required.
• 3–5A @ 24VDC contact rating handles mag-lock inrush and fail-safe strikes reliably.

Lifesafety Power · DUAL-BUSS-HARNESS-6FT-BOXED

Lifesafety Power DUAL-BUSS-HARNESS-6FT-BOXED

6-foot dual-bus power harness cable assembly engineered for supervised power distribution from Lifesafety Power supplies to multiple downstream loads

• 6-foot factory-terminated harness eliminates field crimping and reduces installation time.
• Dual-bus configuration enables load balancing across two independent power distribution lanes.
• Boxed packaging protects pre-terminated connectors for immediate deployment on arrival.

Lifesafety Power · E1-BOXED

Lifesafety Power E1-BOXED Standard Power

Compact standard power enclosure from the Lifesafety Power E Series line, designed to deliver reliable DC power distribution in security and access

• Compact enclosure form factor suits cabinet, wall, or rack-mount deployments.
• Delivers isolated, supervised DC power feeds to multiple devices in one unit.
• Verify input voltage, output capacity, and circuit config before finalizing BOM.

Lifesafety Power · E12M-BOXED

Lifesafety Power E12M-BOXED Multi-Purpose Enclosure

Multi-purpose power and access control enclosure engineered for modular access system installations

• 750W dual-voltage distribution supports up to 24-door access control deployments.
• Removable backplate enables full bench pre-wiring before on-site installation.
• 14-gauge welded steel with powder coat finish resists mechanical stress and corrosion.

Lifesafety Power · E1M-BOXED

Lifesafety Power E1M-BOXED Unified Power Sol. - Mercury 14.5

Unified power solution from the Lifesafety Power Mercury lineup, designed to simplify power provisioning in compact security installations

• Factory-assembled, tested-ready boxed unit eliminates custom panel fabrication labor.
• 14.5 x 5.5 in. form factor fits tight equipment racks and wall-mounted panels.
• Optimized for Lifesafety Power Mercury E1 and E2 series architectures.

Lifesafety Power · E2-BOXED

Lifesafety Power E2-BOXED Enclosure E2 20x16x4.5 black no bac

Wall-mounted steel enclosure designed for power distribution, supervision, and control electronics in commercial security and access-control systems

• 20"W × 16"H × 4.5"D steel enclosure fits retrofit and space-constrained installs.
• Black powder-coated cold-rolled steel resists corrosion in standard indoor environments.
• Accepts E2-series power supplies, relay cards, and supervision modules in one enclosure.

Lifesafety Power · E2M-BOXED

Lifesafety Power E2M-BOXED MCLASS Enclosure

UL294-listed multi-purpose power enclosure engineered to consolidate access control hardware, FlexPower management boards, and battery backup into a

• UL294-listed enclosure supports compliance on regulated access control installations.
• Removable backplate enables shop-level pre-wiring, cutting field labor by 30–40%.
• 4.5" depth integrates battery backup internally—no external extensions required.

Lifesafety Power · E2M1-BOXED

Lifesafety Power E2M1-BOXED Enclosure E2M1 20x16x4.5 black

Compact field-mount steel enclosure designed for distributed power and control electronics in surveillance and access-control deployments

• Pre-installed 35mm DIN-rail backplate accepts power supplies, breakers, and relays without drilling.
• 20×16×4.5-inch black powder-coated steel body fits pole, wall, or overhead mounts in tight spaces.
• Hinged latched door allows fast component access without unmounting the enclosure from the wall.

Lifesafety Power · E2M1-DOOR-ONLY

Lifesafety Power E2M1-DOOR-ONLY QUICK GUIDE Mercury Backplat

250W 24V DC power supply purpose-built for access control and door-locking systems in mid-scale deployments

• 250W 24V DC supply handles 8–16 mag locks or electric strikes on a single unit.
• 24 relay outputs with per-output fail-secure/fail-safe selection eliminate external relay modules.
• E12 enclosure (48H×36W×8D) mounts directly in 19-inch racks without custom fabrication.

Lifesafety Power · E4-2BS1

Lifesafety Power E4-2BS1 E4 Battery Enclosure

Modular battery backup enclosure designed to extend runtime on Lifesafety Power E4-series uninterruptible power supplies

• Mounts directly to E4-series UPS units—no external cabling or adapters needed.
• Stackable enclosures let you scale runtime capacity as site power demands grow.
• Fits standard 19-inch racks, keeping surveillance and access-control installs compact.

Lifesafety Power · E4-BOXED

Lifesafety Power E4-BOXED FLEXPOWER E Series Std Enclosures

Lifesafety Power · E4M-BOXED

Lifesafety Power E4M-Boxed Flexpower E4M / E4M1 / E4M2 / E4M3

UL294-listed multi-purpose enclosure engineered to integrate Lifesafety Power FlexPower power management boards with Mercury Security access control

• UL294-listed enclosure reduces compliance review cycles at system inspection.
• Removable backplate enables shop pre-wiring before transport, cutting field time.
• 6.5-inch depth houses battery backup alongside power boards—no extra cabinet needed.

Lifesafety Power · E4M1-BOXED

Lifesafety Power E4M1-Boxed E4 Enclosure 20W X 24H X 45D Black

Painted steel access control enclosure designed for small-to-medium door control clusters, mounting up to 5 Mercury or LNL boards with integrated

• Integrated 20W supply supports up to 5 Mercury/LNL boards without auxiliary power.
• Compact 20W×24H×4.5D steel enclosure mounts flush to walls in tight entry points.
• Pre-wired tamper switch signals your panel alarm input on unexpected door breach.

Lifesafety Power · E4M1-DOOR-ONLY

Lifesafety Power E4M1-DOOR-ONLY DOOR ONLY E4M1 enclosure door

Replacement door assembly designed for the E4M1 backup power enclosure, securing access to internal power distribution and battery backup components

• Direct OEM fit for E4M1 enclosures; no shimming, adapter plates, or modification required.
• Factory-installed latch hardware keeps battery and power distribution components secured.
• Installs with hand tools only, minimizing downtime during field door replacement.

Lifesafety Power · E8B1-BOXED

Lifesafety Power E8B1-BOXED Enclosure E8B1 36x30x6.5 black

Black powder-coated steel enclosure designed to house and protect access control electronics in Brivo backplate and door-mount configurations

• 36×30×6.5 in. shallow depth supports both recessed and surface-mount installation.
• Engineered for Brivo backplate and door-mount controller configurations.
• Black powder-coated steel resists corrosion across indoor commercial deployments.

Lifesafety Power · E8M-BOXED

Lifesafety Power E8M-BOXED Multi-Purpose Enclosure

Modular access-control enclosure designed for integrators who need to combine power management and access-panel hardware in a single

• Supports up to 12 doors across 12V and 24V rails in a single enclosure.
• Removable backplate enables shop-side pre-wiring, cutting on-site assembly time.
• 16-gauge steel with 6.5" depth fits 12Ah battery packs internally; no external mount.

Lifesafety Power · E8M1-BOXED

Lifesafety Power E8M1-BOXED MCLASS Multi-purpose Enclosures

Modular power and access control enclosure designed to integrate FlexPower power management boards with Mercury Security access control panels in a

• Houses FlexPower and Mercury Security panels in one cabinet, cutting equipment overhead.
• Removable backplates allow shop-side board mounting before transport, reducing field rework.
• Dual voltage distribution supports up to 12–16 doors without secondary power supplies.

Lifesafety Power · E8M2-BOXED

Lifesafety Power E8M2-BOXED 16 Door Security

Wall-mounted power distribution enclosure designed to centralize and protect 16 access control door circuits in commercial security installations

• 16 isolated door outputs prevent a single fault from taking down adjacent circuits.
• Accepts 120V AC input directly, eliminating step-down transformers in most facilities.
• Wall-mount 36"H×30"W enclosure suits retrofit installs where floor space is constrained.

Lifesafety Power · E8M3-BOXED

Lifesafety Power E8M3-BOXED Enclosure E8M3 36x30x6.5 black

Wall-mounted metal enclosure designed for power distribution, battery backup, and control logic in surveillance and access control installations

• 36×30×6.5 in. shallow cabinet fits wiring closets where full racks won't.
• Included Mercury backplate eliminates custom fab for DIN rail and breaker layout.
• Black powder-coat finish controls corrosion and dust in indoor control rooms.

Lifesafety Power · FPG100-BOXED

Lifesafety Power FPG100-BOXED Power Supply 100-240VAC internat

Dual-voltage power supply accepting 100–240VAC input, with selectable 12VDC (8A) or 24VDC (4A) output

• Accepts 100–240VAC input — no step-down transformer needed for global deployments.
• Selectable 12VDC/8A or 24VDC/4A output covers most access control and lock loads.
• Single enclosed supply supports multi-region sites including North America, Europe, and Japan.

Lifesafety Power · FPG100/200-2C83D8PE4M1/P16-A

Lifesafety Power FPG100/200-2C83D8PE4M1/P16-A Universal Input

Universal-input 200W power supply engineered for distributed access control and life safety infrastructure

• Dual 8A outputs at 12V or 24V cover multi-door nodes from a single 100W supply.
• Eight relay lock drivers (3A each) support strikes and mag-locks with no external relays.
• Eight Class 2 aux outputs feed readers and REX devices on segregated power rails.

Lifesafety Power · FPG200-B100C4D8PE4M/P4-A

Lifesafety Power FPG200-B100C4D8PE4M/P4-A 200W PoE

Universal-input 200W power supply engineered for distributed access control, emergency egress, and ancillary life-safety circuit distribution

• 4 relay outputs at 24V/8A support failsafe, failsecure, or FAI logic per output.
• 8 Class 2 aux DC outputs at 2.5A each power readers, REX buttons, and indicators.
• Dual-bus architecture enables segregated power domains for redundancy across doors.

Lifesafety Power · FPG200-B100C82D8PE6M/P8-A

Lifesafety Power FPG200-B100C82D8PE6M/P8-A 200W

Compact 200W power supply engineered for access control and life-safety integration

• 200W at 24V DC sustains 8.3A for 4–6 electronic locks on a single supply.
• 8 relay outputs, 3A fused per channel, with selectable failsafe/failsecure/FAI logic.
• Universal 90–264V AC input eliminates site-specific transformers across multi-site rollouts.

Lifesafety Power · FPG200-BOXED

Lifesafety Power FPG200-BOXED Power Supply 100-240VAC internat

Compact regulated power supply designed to feed distributed IP cameras , access control readers, and networked sensors across multi-building or

• Universal 100–240VAC input deploys across regions without swapping SKUs.
• 24VDC/8A output delivers 192W for camera clusters where PoE isn't available.
• International and Japan-compliant certifications cover multi-jurisdiction installs.

Lifesafety Power · FPG50-BOXED

Lifesafety Power FPG50-BOXED Power Supply 100-240VAC internati

Compact, universal power supply engineered for international security installations where AC mains voltage varies

• Accepts 100–240VAC input, eliminating separate power units across global deployments.
• Selectable 12VDC or 24VDC output at 2A supports both legacy and modern IP camera installs.
• Japan-certified compliance simplifies regulatory approval for Asia-Pacific security projects.

Lifesafety Power · FPO150-2C82D8E4M1

Lifesafety Power FPO150-2C82D8E4M1 FPO150-2C82D8E4M1

150W enclosure-mounted power distribution system engineered for multi-door access control deployments

• Field-selectable 12V/24V output eliminates separate supplies for mixed lock hardware.
• 16 independently fused relay outputs prevent a single fault from cascading to other circuits.
• 16 auxiliary outputs isolate reader and REX power from relay switching noise across 32 loads.

Lifesafety Power · FPO150-2C8E2

Lifesafety Power FPO150-2C8E2 150W Power Supply

150W power supply designed to feed access control systems, lock controllers, and auxiliary security devices that demand switchable 12V or 24V output

• Delivers 12A at 12VDC or 6A at 24VDC from a single 150W regulated output.
• 16 individually fused 3A relay outputs prevent a single short from cascading failures.
• Each relay output is selectable failsafe or failsecure for strikes, mag locks, and solenoids.

Lifesafety Power · FPO150-2C8P2D8PE8M1

Lifesafety Power FPO150-2C8P2D8PE8M1 150W 12V/24V

150W power supply board (PSB) designed for distributed access control, door lock, and auxiliary device power in mid-to-large deployments

• 150W power supply with selectable 12V/12A or 24V/6A output
• 16 relay lock control outputs (Class 2 power-limited)
• Centralizes power distribution for multi-door installs

Lifesafety Power · FPO150-2D8E4

Lifesafety Power FPO150-2D8E4 150W PS 12A/12V or 6A/24V 16 DC

150W regulated power supply purpose-built for access control and door hardware installations that require simultaneous 12V and 24V rails

• Dual-rail output (12A/12V or 6A/24V) eliminates a second supply in mixed-voltage panels.
• 16 independently fused 3A DC outputs enable zone-level distribution without daisy-chaining.
• Per-output Bus1/Bus2 routing allows load rebalancing without rewiring the panel.

Lifesafety Power · FPO150-2D8E6M1

Lifesafety Power FPO150-2D8E6M1 150W 12A/12V

150W industrial power supply designed for distributed surveillance and access control deployments where you need flexible voltage and output

• Dual-voltage primary (12V/12A or 24V/6A) adapts to cable-run length without swapping units.
• 8 independently fused 3A aux outputs prevent a single short from collapsing the entire supply.
• Per-channel Bus1/Bus2 routing isolates camera power from access-control loads on one PSU.

Lifesafety Power · FPO150-2D8E6P

Lifesafety Power FPO150-2D8E6P FPO150-2D8E6P

150W enclosed power distribution unit designed for multi-zone access control and surveillance installations where equipment failures and short

• Selectable 12V/12A or 24V/6A primary output covers mixed-voltage deployments from one SKU.
• 16 independently fused 3A auxiliary circuits isolate faults so one short won't drop adjacent loads.
• Paxton back-plate compatible; 23×32×6.5-inch footprint fits cabinets, closets, and wall mounts.

Lifesafety Power · FPO150-2D8PE1

Lifesafety Power FPO150-2D8PE1 150W Power Supply

150W power supply designed to distribute power to distributed security endpoints across access control, camera, and alarm circuits

• Selectable 12VDC/12A or 24VDC/6A output supports both legacy and modern low-voltage devices.
• 16 independent Class 2 outputs (up to 2.5A each) enable per-circuit fault isolation and load balancing.
• E1 enclosure (14H×12W×4.5D in.) fits standard 19-inch racks and wall-mount cabinets.

Lifesafety Power · FPO150-2D8PE4M

Lifesafety Power FPO150-2D8PE4M Unified Power Sys

Unified power distribution platform designed for access control systems, emergency egress control, and integrated facility security infrastructure

• 150W output with dual 8A Class 2 zones supports 8–12 access control devices per zone.
• Each D8P module switches independently between 12V and 24V, eliminating mixed-voltage rewiring.
• Integrated Form C dry contact triggers fail-safe door unlock on fire alarm signal automatically.

Lifesafety Power · FPO150-2D8PE4M1

Lifesafety Power FPO150-2D8PE4M1 8-16 Door

Fixed-output, high-capacity power distribution unit designed for multi-camera and access control installations where you need to centralize power for

• 150W capacity with 16 individually fused 2.5A outputs isolates faults per circuit.
• Selectable 12VDC/24VDC primary output reduces voltage drop on runs over 100 feet.
• Mercury backplate pre-terminates distribution rails, cutting panel wiring time on install.