Lifesafety Power · RGM75-C8PZ/T4-A

Lifesafety Power RGM75-C8PZ/T4-A 75W power supply 6A/12V or 3A/2

75-watt power supply engineered for access control systems requiring distributed relay-switched lock control across multiple entry points

• Eight 2.5A relay outputs independently switch up to 8 locks from one 75W unit.
• Each output field-configures as fail-safe, fail-secure, or FAI for code compliance.
• Single supply delivers 6A at 12VDC or 3A at 24VDC, eliminating per-door modules.

Lifesafety Power · RGM75-D8P

Lifesafety Power RGM75-D8P 75W power supply 6A/12V or 3A/24V

75W regulated DC power supply designed to support distributed IP cameras and network-powered security endpoints in small-to-medium installations

• Selectable 12VDC/6A or 24VDC/3A output eliminates stocking separate PSUs per voltage.
• 75W capacity supports 6–12 camera endpoints depending on per-device load profile.
• DIN-rail form factor integrates cleanly into centralized power enclosures and panels.

Lifesafety Power · RGM75-D8PZ

Lifesafety Power RGM75-D8PZ RGM75-D8PZ

Rackmount power distribution module designed for access control and surveillance installations requiring integrated management of multiple electric

• 75W single-voltage (12V or 24V) output powers up to four door strikes without thermal overload.
• Four dedicated door channels plus eight fused auxiliary ports consolidate all rack power in 2U.
• 19-inch rackmount form factor centralizes power distribution, cutting cabling complexity at install.

Lifesafety Power · RGM75B-C42D8PZ-WT-AMZ01/E

Lifesafety Power RGM75B-C42D8PZ-WT-AMZ01/E 220VAC input. 75W powe

2U rackmount power distribution system designed for mid-scale access control, intrusion detection, and security infrastructure deployments

• 220VAC input with 12V/24V selectable output eliminates separate racks for mixed devices.
• Four relay outputs, each fused at 3A, support independent failsafe or failsecure door logic.
• Sixteen Class 2 auxiliary outputs at 2.5A each power readers, sensors, and keypads per bus.

Lifesafety Power · RGM75B-C4D8PZ

Lifesafety Power RGM75B-C4D8PZ 75W power supply 6A/12V or 3A/24V

75W rackmount power supply designed for access control and security system installations

• Selectable 6A/12V or 3A/24V output covers both common lock and reader voltages.
• Four relay outputs, each fused at 3A and configurable for FAI, failsafe, or failsecure.
• Eight class-2 DC auxiliary outputs at 2.5A each support high peripheral counts per rack unit.

Lifesafety Power · RGM75B-C4PD8PZ

Lifesafety Power RGM75B-C4PD8PZ RGM75B-C4PD8PZ

75W rackmount power supply engineered for small-to-medium access control systems that share infrastructure with network and security equipment in a

• 75W continuous output powers four solenoid locks or EM devices simultaneously.
• Four independent form-C relay outputs isolate control signaling per door.
• Configurable 12/24VDC output at install reduces SKU count across mixed lock types.

Lifesafety Power · RGM75B-C4PZ

Lifesafety Power RGM75B-C4PZ Gemini Rack Mount

Dual-voltage rack-mount power supply engineered for access control and fire alarm systems

• Delivers 75W total output with four 2.5A Class 2 relay lock outputs for multi-zone access control.
• Built-in fire alarm disconnect auto-unlocks doors on alarm, meeting life-safety code requirements.
• Fits standard 19-inch racks at 3.5H × 19.0W × 20.5D inches with 12V/24V selectable by zone.

Lifesafety Power · RGM75B-C4PZ/E

Lifesafety Power RGM75B-C4PZ/E Gemini Rack Mount

75W rack-mount power supply designed for access control systems requiring redundant battery backup and failsafe/failsecure lock control

• Dual 12V/24V outputs programmable per zone eliminate separate supplies in mixed-lock deployments.
• Four 2.5A Class 2 relay outputs support independent failsafe or failsecure lock configs per zone.
• Form C fault contacts supervise low battery, ground fault, PSU failure, and blown fuse conditions.

Lifesafety Power · RGM75B-C8D8PZ

Lifesafety Power RGM75B-C8D8PZ 75W power supply 6A/12V or 3A/24V

75W power supply for access control and emergency egress systems

• Delivers 75W at 6A/12V or 3A/24V to centralize power for multi-lock deployments.
• Eight relay outputs fused at 3A each with FAI/failsafe/failsecure selection per output.
• Eight class 2 DC aux outputs at 2.5A each, Bus1/Bus2 selectable for zoned distribution.

Lifesafety Power · RGM75B-C8PZ/T4-A

Lifesafety Power RGM75B-C8PZ/T4-A 75W power supply 6A/12V or 3A

75W, dual-output rackmount power supply designed for security integrations requiring redundant voltage rails and multiple access control relay outputs

• Dual primary output (6A/12V or 3A/24V) supports both lock voltage standards from one unit.
• Eight relay lock control outputs with per-output failsafe/failsecure selection, no external relay modules needed.
• Adjustable 5–18V secondary rail at 4A powers auxiliary readers and sensors on an independent circuit.

Lifesafety Power · RGM75B-D8PZ

Lifesafety Power RGM75B-D8PZ 4 Door 75W Integrated Mercury Drawer

75W integrated Mercury drawer designed for multi-door access control installations where centralized power distribution and relay control are required

• Consolidates four-door relay control into one 75W enclosure, reducing board sprawl.
• Mercury protocol integration eliminates distributed relay boards across your facility.
• Rack-mounts in standard 19-inch four-post or wallmount bracket; supports 12/24VDC.

Lifesafety Power · RGM75B-M8PNZ/E

Lifesafety Power RGM75B-M8PNZ/E 75W PS 6A/12V or 3A/24V 12V 2nd

75W power supply module designed for security and access-control installations requiring regulated 12V or 24V output

• Delivers 75W output at 6A/12V or 3A/24V to power access-control loads reliably.
• Class 2 power-limited design simplifies code compliance for indoor security installs.
• Adjustable 5–18V at 4A output accommodates mixed-voltage device requirements on one module.

Lifesafety Power · RGS-XZ-BOXED

Lifesafety Power RGS-XZ-BOXED Gemini Rack Drawer RGS-X 2U blac

2U slide-out rack drawer designed to integrate with Lifesafety Power Gemini backup power systems in 19-inch standard equipment racks

• Ball-bearing slides extend the full drawer for terminal and battery access without rack removal.
• Z-bracket hardware included for direct 19-inch rack mounting — no custom fabrication required.
• Native Software House backplate support ensures drop-in fit with Gemini power infrastructure.

Lifesafety Power · RGS150

Lifesafety Power RGS150 150W PS 12A/12V or 6A/24V 2U RG Software

150W rack-mounted power supply designed for mid-scale surveillance and access control deployments

• Dual-voltage output (12A/12V or 6A/24V) supports legacy and 24V devices in one chassis.
• 2U, 19-inch rack profile fits standard equipment rooms with no external housing required.
• RG Software integration enables remote outlet control, usage tracking, and failover coordination.

Lifesafety Power · RGS150-4D8Z

Lifesafety Power RGS150-4D8Z Gemini Rack Mount Power Sys RGS150-4

UL-listed rack mount power distribution system that combines FlexPower modules and access control hardware in a single compact enclosure

• 150W output with battery backup keeps doors powered through outages.
• 32 fused 3A auxiliary outputs with dual-color LED status per zone simplify fault tracing.
• Built-in fire alarm disconnect automatically releases door locks on alarm trigger.

Lifesafety Power · RGS150-C8D8Z

Lifesafety Power RGS150-C8D8Z 150W PS 12A/12V or 6A/24V 8 relay

150W rack-mount power supply with 8 relay outputs and 8 auxiliary DC outputs for access control and door lock systems

• Switchable 12A/12V or 6A/24V output covers mixed lock and strike voltage requirements.
• Eight relay outputs, each independently fused at 3A with failsafe/failsecure/momentary selection.
• 2U rack-mount chassis with Z-bracket wire management arm simplifies multi-door panel builds.

Lifesafety Power · RGS150-D8Z

Lifesafety Power RGS150-D8Z Gemini Rack Mount RGS150-D8Z

150W rack mount power supply designed for access control and fire alarm systems

• 150W output with 8 × 3A fused zones supports multi-door access control from one 3RU unit.
• Built-in fire alarm disconnect automatically releases locked doors on alarm trigger.
• Integrated fast charger and low-battery cutoff protect battery backup during extended outages.

Lifesafety Power · RGS150B-C8PD8P

Lifesafety Power RGS150B-C8PD8P 150W power supply 12A/12V or 6A

150W power supply purpose-built for access control and security lock applications in commercial facilities

• Delivers 12A at 12VDC or 6A at 24VDC to support multiple locks without voltage sag.
• Eight Class 2 relay outputs (2.5A each) simplify code compliance without per-circuit fuses.
• FAI, failsafe, or failsecure mode is selectable per relay to match per-door fire code logic.

Lifesafety Power · RGS150B-M8NZ

Lifesafety Power RGS150B-M8NZ 150W power supply 12A/12V or 6A/24

2U rack-mount power module designed to centralize power distribution for IP camera systems and network security infrastructure

• Dual primary output—12A/12VDC or 6A/24VDC—handles high-inrush cameras and long runs.
• 8-port distribution with per-port 3A fusing isolates faults so one short won't drop the rack.
• Adjustable secondary output (5–18V @ 4A) powers legacy or specialty devices without extra supplies.

Lifesafety Power · RGS250-4D8/E

Lifesafety Power RGS250-4D8/E Rackmount 150W power supply 12A/12

150W rackmount power supply designed to distribute regulated DC power to networked security endpoints and auxiliary devices in distributed

• 150W rackmount power supply with 8 outputs
• 12V/12A or 24V/6A selectable per output
• Bus1/Bus2 supervision for failover-tolerant deployments

Lifesafety Power · RGS250-4D8Z

Lifesafety Power RGS250-4D8Z 250W PS 20A/12V or 10A/24 2U RG Soft

2U rack-mounted power supply delivering 250W total capacity with dual voltage options: 20 amps at 12V or 10 amps at 24V

• Delivers 250W total capacity at 20A/12V or 10A/24V for centralized DC distribution.
• 32 independently fused 3A output channels support Bus1/Bus2 partitioning without added hardware.
• 2U rack-mount form factor with Z-bracket wire management simplifies field termination and service.

Lifesafety Power · RGS250-4D8Z/E

Lifesafety Power RGS250-4D8Z/E Gemini Rack Mount Power Systems

250W unified power system combining FlexPower modules and access control hardware in a compact UL-listed enclosure

• 250W output with 32 fused 3A auxiliary outputs supports large multi-zone deployments.
• Built-in fire alarm disconnect automatically releases door locks on alarm activation.
• Low-battery cutoff and fast charger prevent deep discharge in battery-backed installs.

Lifesafety Power · RGS250-4D8Z1

Lifesafety Power RGS250-4D8Z1 250W power supply 20A/12V or 10A/2

250W power supply designed for distributed IP camera and accessory installations in rack-mount environments

• 32 independently fused 3A DC outputs isolate faults and protect each endpoint circuit.
• Dual-bus architecture lets you supervise power integrity across two separate zones.
• 2U 19-inch rack form factor fits standard network closets; delivers 20A/12V or 10A/24V.

Lifesafety Power · RGS75/150-D8Z

Lifesafety Power RGS75/150-D8Z 75W Power Supply 6A/12V or 3A/24V

Field-configurable power supply designed to distribute 12VDC or 24VDC to multiple security endpoints in a single enclosure

• Dual-bus design powers 12VDC and 24VDC devices from one enclosure, eliminating extra PSUs.
• Eight independently fused 3A outputs isolate device faults, protecting the full distribution circuit.
• Field-configurable for 75W or 150W output; scales from 6A/12V up to 12A/12V as loads grow.

Lifesafety Power · RGXM150-C8PZ

Lifesafety Power RGXM150-C8PZ 150W power supply 12A/12V or 6A/24

150W regulated power supply engineered for access control and security system integration

• Delivers 12A@12VDC or 6A@24VDC from a single 150W supply for mixed lock loads.
• Eight relay outputs at 2.5A each support per-channel failsafe or failsecure selection.
• Class 2 power-limited design eliminates conduit separation from low-voltage signal wiring.

Lifesafety Power · RGXM150B-C8D8P

Lifesafety Power RGXM150B-C8D8P 150W power supply 12A/12V or 6A

150W power supply engineered for door control and auxiliary device management in commercial access control and security installations

• Dual-voltage output (12V@12A or 24V@6A) eliminates separate supplies for mixed-voltage installs.
• Eight relay outputs, 3A fused per channel, support failsafe or failsecure door hardware independently.
• Eight Class 2 aux outputs (2.5A each) power readers and sensors across two segmented control buses.

Lifesafety Power · RS250-M16

Lifesafety Power RS250-M16 150W PS 12A/12V or 6A/24V 8 relay lock

Mid-capacity power distribution unit designed for access-control installations requiring independent relay-switched lock control and auxiliary power

• Delivers 150W at 12A/12V or 6A/24V, scaling to both mag-lock and long-run door hardware.
• Eight relay lock outputs (3A fused each) support mixed failsafe/failsecure modes per door.
• Sixteen 2.5A auxiliary outputs across dual buses enable independent power sequencing per zone.

Lifesafety Power · RS250B-M16

Lifesafety Power RS250B-M16 Rackmount 250W power supply 20A/12V

2U rackmount power distribution unit designed to centralize power delivery across multi-camera deployments and IP-based security infrastructure

• Delivers 250W across 16 managed ports at 12V/20A or 24V/10A for mixed deployments.
• Per-port fault detection via dual RS8 boards enables real-time failure isolation.
• Adjustable 5–18V secondary output at 4A supports door locks and access control readers.

Lifesafety Power · RSMOD-BOXED

Lifesafety Power RSMOD-BOXED RS485 Module for FPO Gen2 or M8 Gen2

N RS485 communication module designed to extend FPO Gen2 and M8 Gen2 power supplies with remote supervision and serial device integration capabilities

• Daisy-chains up to 32 devices on a single RS485 twisted-pair run.
• Retrofit into FPO Gen2 or M8 Gen2 module slots with no hardware replacement.
• Delivers real-time voltage, current, and fault status to a central control panel.

Lifesafety Power · RSMOD-QTY-8-BOXED

Lifesafety Power Rsmod-Qty-8-Boxed Rsmod-Qty-8-Boxed 0W Single Vo

Bulk package of standardized modular power supply modules designed for integrators deploying distributed power infrastructure across security

• 8-pack bulk format cuts per-unit cost and simplifies spare parts inventory across sites.
• Hot-swap capability lets you replace or expand modules without powering down the chassis.
• Modular form factor supports mixed-voltage configurations within a single Lifesafety Power enclosure.

Lifesafety Power · SDU-CABLE-BOXED

Lifesafety Power Sdu-Cable-Boxed Lsp Connectpro Sdu-06D / USB/Dvi

6-foot combined DVI-D and USB KVM cable engineered to reduce cable clutter in control room and network operations center (NOC) layouts

• Dual-link DVI-D supports 1920×1200+ displays without resolution or refresh compromise.
• Single 6-foot run carries both DVI-D video and USB KVM signals, cutting cable count.
• Integrated USB endpoints reduce accidental disconnections in rack and console deployments.

Lifesafety Power · SNAP-INSTANDOFFS-BAGOF25

Lifesafety Power SNAP-INSTANDOFFS-BAGOF25 Standoffs Nylon snap

25-pack of nylon snap-in standoffs engineered for rapid PCB mounting in power supply enclosures, electrical closets, and security equipment cabinets

• Tool-free snap-in design eliminates wrenches and speeds PCB mounting in enclosures.
• Nylon construction resists corrosion in damp electrical closets and pedestal enclosures.
• 25-pack quantity supports multi-cabinet deployments without repeated restocking delays.

Lifesafety Power · STANDOFF-SCREW-HDW-KIT

Lifesafety Power Standoff-Screw-Hdw-Kit Hardware Kit Set Of (25)

Mounting hardware set designed for securing Lifesafety Power power supply boards and accessory modules during cabinet or panel installation

• Includes 25 zinc steel standoffs and 50 screws, eliminating separate fastener sourcing.
• 2:1 screw-to-standoff ratio provides spares for future maintenance or panel reconfiguration.
• Zinc finish delivers corrosion resistance for standard indoor cabinet and panel environments.

Lifesafety Power · Z-BRACKET-HD-BOXED

Lifesafety Power Z-BRACKET-HD-BOXED 0W Single Voltage 120 VAC

Mounting bracket designed for integration with Lifesafety Power equipment

• Rated for 120VAC environments, ensuring safe mechanical integration with compatible power supplies.
• Passive mounting component requires no electrical configuration, simplifying cabinet installation.
• Designed for Lifesafety Power accessory lineup, supporting wall-mount and standard cabinet deployments.

Middle Atlantic · IEC-72X1

Middle Atlantic 1-PACK 72in. in. TWIST IEC - IEC-72X1

Single-pack, 6-foot (1.8 m) IEC power cord fitted with a NEMA 5-15P plug, finished with a blue stripe for quick visual identification inside dense

Middle Atlantic · PDT-1015C-NS

Middle Atlantic 10 Outlet Single 15 AMP Circuit Thin Power Strip with Cord Fits - PDT-1015C-NS

Thin, low-profile vertical power distribution unit delivering a single 15-amp circuit across 10 NEMA 5-15R outlets — purpose-built for rack