Lifesafety Power FPO75/150-C8PD8PE6M Dual-Output Power Supply with Relay Control

Overview

The FPO75/150-C8PD8PE6M is a supervised power supply designed for access control and life safety integrations requiring both power distribution and relay-switched lock control. Output is selectable between 75W (6A/12V or 3A/24V) or 150W (12A/12V or 6A/24V) modes, with 8 relay outputs capable of switching door locks or solenoids at 2.5A per channel. Each relay output supports independent failsafe, failsecure, or FAI (Fire Alarm Interface) configuration — essential when compliance requires automatic door unlock on alarm. The 8 DC auxiliary outputs provide additional 2.5A-per-channel power distribution for sensors, badge readers, or supplementary devices on segregated bus assignments (Bus1 or Bus2).

Compatibility

Integrates with Lifesafety Power access control platforms and third-party systems requiring dual-voltage supervised power with relay switching logic. Compatible with badge readers, magnetic locks, electric strikes, motion sensors, and IP cameras needing auxiliary 12V or 24V power on isolated buses. Suitable for multi-door installations where per-door failsafe logic must be managed independently.

Physical & Installation

Housed in E6 enclosure (30H × 23W × 6.5D inches) with mercury back plate for DIN-rail or surface mounting. Class 2 power-limited outputs reduce wiring gauge requirements and allow extended runs to remote locks without additional conditioning. Output-selectable voltage (12V or 24V) eliminates the need for separate power supplies in mixed-voltage deployments.

When to Choose a Different Model

If deployment requires more than 8 relay outputs, consider a multi-module stacked configuration or a larger Lifesafety Power frame. If only PoE switch-delivered power to endpoints is needed (no relay switching), a passive PoE injector or standard Ethernet power supply may be more cost-effective. If battery backup is mandatory, verify UPS integration capability with your systems integrator.