Lifesafety Power

Lifesafety Power · FPO75-2D8PE1

Lifesafety Power FPO75-2D8PE1 75W Power Supply

75W power supply purpose-built for small-to-medium distributed surveillance and access control deployments

• 16 supervised Class 2 outputs (2.5A each) isolate faults without cascading failures.
• Dual-bus architecture segments 12V and 24V loads in one panel, reducing wiring complexity.
• E1 enclosure (14H×12W×4.5D in.) mounts on 19-inch rack rails or wall on 4-inch centers.

Lifesafety Power · FPO75-2D8E4M1

Lifesafety Power FPO75-2D8E4M1 75W Power Supply

Compact 75W power supply designed for distributed access control, alarm, and IP device deployments where multiple 12VDC or 24VDC circuits require

• Eight individually fused 3A outputs prevent cascade failures across locks and readers.
• Selectable 12V/24V per output supports mixed device loads from a single 75W supply.
• Dual-bus architecture enables fault isolation in supervised access control deployments.

Lifesafety Power · FPO75-2D8E4M

Lifesafety Power FPO75-2D8E4M 250W PS

250W auxiliary power supply designed for distributed access control and electromagnetic lock circuits in commercial security deployments

• Selectable 20A/12V or 10A/24V output eliminates buck/boost conversion on mixed-voltage sites.
• Four independent 2.5A Class 2 channels isolate lock, reader, and RTE circuits without daisy-chaining.
• Dual-bus per-output assignment prevents single-fault cascade across up to 24-door deployments.

Lifesafety Power · FPO75-2D8E2-5SL1

Lifesafety Power FPO75-2D8E2-5SL1 75W 16 Aux Outputs

75W regulated power supply engineered for access control systems and distributed security installations requiring multiple auxiliary outputs

• Delivers 6A at 12VDC or 3A at 24VDC to power locks, readers, and relays.
• 16 auxiliary outputs distribute power to sub-circuits without added supplies.
• Includes five Salto plates for direct integration with Salto access control platforms.

Lifesafety Power · FPO75-2D8E1

Lifesafety Power FPO75-2D8E1 75W Power Supply

75W auxiliary power supply designed to distribute regulated DC power across multiple power supply branches in networked security installations

• 16 independently fused 3A outputs eliminate single failure points across distributed loads.
• Per-output Bus1/Bus2 selection isolates zones or backup domains during commissioning.
• Compact 14H×12W×4.5D-inch enclosure fits standard DIN rail or wall-mount security cabinets.

Lifesafety Power · FPO75-2B100E1

Lifesafety Power FPO75-2B100E1 75W Tvps 12/24/2 Adj E1 Cabnt

75W triple voltage power supply configured with an FPO75 base unit and two B100 output modules, housed in an E1 cabinet enclosure

• 75W aggregate budget powers dual B100 modules across independent voltage branches.
• Adjustable 5–18V per module supports legacy and modern 12/24VDC devices simultaneously.
• E1 cabinet form factor suits rack or wall mount in telecom and security equipment closets.

Lifesafety Power · FPO75/150-C4C82D8PE4M1

Lifesafety Power FPO75/150-C4C82D8PE4M1 16 Door

16-door rated power distribution module designed for small-to-mid-sized access control installations

• Supports up to 16 doors from a single 12V DC power distribution module.
• Consolidates lock, reader, and ancillary device power to reduce panel clutter.
• Fits small-to-mid-sized access control installs with room for moderate expansion.

Lifesafety Power · FPO75/150-D8E2

Lifesafety Power FPO75/150-D8E2 FPO75/150-D8E2

Compact 75W power supply board engineered for mid-scale security and access control deployments

• 75W board powers door strikes, card readers, and lock solenoids in one supply.
• Selectable 12VDC/6A or 24VDC/3A output eliminates separate supplies in mixed-voltage installs.
• Compact board form factor integrates into DIN-rail enclosures and control cabinets.

Lifesafety Power · FPO75/150-C8PD8PE6M

Lifesafety Power FPO75/150-C8PD8PE6M 75W power supply 6A/12V

Supervised power supply designed for access control and life safety integrations requiring both power distribution and relay-switched lock control

• Selectable 75W or 150W output supports 12V/24V multi-door deployments from one unit.
• 8 relay outputs at 2.5A each support per-door failsafe, failsecure, or FAI configuration.
• 8 auxiliary DC outputs deliver isolated bus power to readers, sensors, and cameras.

Lifesafety Power · FPO75/150-C8PD8PE4

Lifesafety Power FPO75/150-C8PD8PE4 Single/Dual

Preconfigured power distribution unit designed for small-to-mid-scale security deployments where single and dual voltage circuits are required

• Ships preconfigured, eliminating field setup time and reducing commissioning complexity.
• Supports mixed single and dual voltage circuits for cameras and access control from one unit.
• Fixed preconfiguration suits small-to-mid-scale deployments; verify specs before ordering.

Lifesafety Power · FPO75/150-C8PD8PE2

Lifesafety Power FPO75/150-C8PD8PE2 8 Lock 8 Aux Outputs

75W class 2 power distribution enclosure built for access control and low-voltage security systems

• Supplies 8 dedicated lock outputs and 8 auxiliary outputs from one enclosure.
• Dual-rated 75W/150W lets you scale multi-door deployments without swapping hardware.
• Class 2 limited outputs at 2.5A each; no per-circuit overcurrent protection required.

Lifesafety Power · FPO75/150-C8PD8PE4A

Lifesafety Power FPO75/150-C8PD8PE4A 75W power supply 6A/12V

Dual-output power supply designed to support distributed access control deployments where electric lock supervision, door status feedback, and

• Selectable 75W or 150W output eliminates over-provisioning across mixed-voltage zones.
• 8 relay outputs with per-output fail-safe/fail-secure selection suits mixed door configs.
• 8 auxiliary DC outputs assign independently to Bus1 or Bus2 without consuming relay capacity.

Lifesafety Power · FPO75/150-C8P2D8PE4M1

Lifesafety Power FPO75/150-C8P2D8PE4M1 Power supply board 75W

Configurable power supply board available in 75W or 150W output capacity, designed to consolidate DC distribution and relay control for door locks

• Dual-capacity design runs 75W or 150W to match total door lock and auxiliary load.
• 8 relay outputs plus 16 auxiliary DC outputs consolidate control in one compact board.
• Native Mercury/Lenel backplate mounting cuts wiring complexity in access control panels.

Lifesafety Power · FPO75/150-C8D8PE8M

Lifesafety Power FPO75/150-C8D8PE8M 8 Door

Multi-output power supply engineered for small- to mid-scale access control deployments

• 8 independent output channels isolate door lock and reader circuits across up to 8 access points.
• Centralized regulated DC power reduces field wiring complexity in warehouses and office deployments.
• Battery power support maintains lock and reader operation during primary power interruptions.

Lifesafety Power · FPO75/150-C8D8E6S-VZ01

Lifesafety Power FPO75/150-C8D8E6S-VZ01 75W 6A/12V

Compact, dual-output power supply designed to provision access control systems, door locks, and security endpoints in mid-sized deployments

• 16 independently fused outputs (8 DC aux + 8 relay) isolate fault domains across zones.
• Per-output failsafe/failsecure selection supports mixed-mode door control in one unit.
• Dual-bus architecture integrates primary and backup panels without rewiring on retrofit jobs.

Lifesafety Power · FPO75/150-C8D8E6S-VZ03

Lifesafety Power FPO75/150-C8D8E6S-VZ03 225W 12V/24V 8-Lock

225W redundant power supply designed for security installations requiring simultaneous 12V and 24V rail delivery

• Delivers 225W across simultaneous 12V and 24V rails from a single chassis.
• Eight independent lock/auxiliary outputs allow separate circuit assignment per device.
• Sealed, filtered enclosure resists dust and thermal cycling in harsh environments.

Lifesafety Power · FPO75/150-C8D8E4M

Lifesafety Power FPO75/150-C8D8E4M 75W 6A/12V

Configurable access control power supply board that delivers either 75W or 150W output, with dual voltage options (12VDC or 24VDC)

• 16 individually fused 3A outputs (8 lock relay + 8 aux DC) reduce cabinet wiring complexity.
• Selectable 75W or 150W operation supports 12V/24V at up to 12A from a single board.
• Size 24 enclosure (20×24×4.5 in.) fits standard security cabinets with Mercury/Lenel backplates.

Lifesafety Power · FPO75/150-C8D8E2

Lifesafety Power FPO75/150-C8D8E2 FPO75/150-C8D8E2

Dual-voltage power supply enclosure designed for access control systems, surveillance networks, and distributed lock / solenoid applications

• Delivers 75W at 12V or 150W at 24V to match your downstream device requirements.
• Eight fused 3A auxiliary outputs distribute power to multiple locks or control boards.
• Compact E2 enclosure mounts in server rooms, electrical closets, or equipment racks.

Lifesafety Power · FPO75/150-C4PD8PE2

Lifesafety Power FPO75/150-C4PD8PE2 FPO75/150-C4PD8PE2

Regulated, dual-output power supply designed for surveillance and access-control installations where independent circuit management is required

Lifesafety Power · FPO75/150-C4PD8PE1

Lifesafety Power FPO75/150-C4PD8PE1 FPO75/150-C4PD8PE1

Redundant power supply designed for distributed security deployments where loss of primary power cannot interrupt video, access control, or alarm

• Dual independent output rails isolate loads, preventing a single fault from dropping all circuits.
• Redundant architecture supports 99.5%+ uptime deployments for NVRs, access panels, and alarms.
• Separate circuit inputs allow phase or UPS isolation, maximizing protection against power events.