Lifesafety Power

Lifesafety Power · FPO75-D8E2-4SL1

Lifesafety Power FPO75-D8E2-4SL1 75W 8 Output

75W distributed power supply designed to feed multiple door locks, readers, and ancillary devices in access control systems

• 75W output delivers 6A@12V or 3A@24V to power locks, readers, and ancillary devices.
• Eight isolated auxiliary outputs limit fault blast radius — one shorted circuit won't drop the full zone.
• Integrates with Salto electronic lock systems and Wiegand or IP-based reader infrastructures.

Lifesafety Power · FPO75-D8E2

Lifesafety Power FPO75-D8E2 FPO75-D8E2

75-watt supervised power supply designed to centralize power distribution for security and access control systems

• Eight supervised outputs let one unit power cameras, locks, and readers from a single point.
• 75 W total budget distributes across multiple devices without overloading a single feeder line.
• Integrated battery charger enables backup hold-up for door locks and alarms during mains failure.

Lifesafety Power · FPO75-D8E1V

Lifesafety Power FPO75-D8E1V 2DR Vertx system power 6A/12V 75W

75W auxiliary power supply designed for Vertx access control and security system integration

Lifesafety Power · FPO75-D8E1R

Lifesafety Power FPO75-D8E1R 6A/12V OR 3A/24V 8 AUX

75W Class 2 power-limited supply designed to feed multiple auxiliary devices in surveillance and access control installations

• Delivers 6A/12V or 3A/24V at 75W to power up to eight auxiliary devices.
• Each of the eight outputs is individually fused at 2.5A, isolating faults per zone.
• E1-rated red enclosure meets fire-alarm and life-safety code marking requirements.

Lifesafety Power · FPO75-D8E1M

Lifesafety Power FPO75-D8E1M FPO75-D8E1M

75W centralized power supply designed to consolidate AC-to-DC conversion and battery backup for distributed IP security cameras and access control

• 75W capacity across 8 independent outputs simplifies multi-camera power distribution.
• Integrated battery backup maintains cameras and access control during AC mains loss.
• Single centralized supply reduces wiring runs and cuts installation labor vs. per-device adapters.

Lifesafety Power · FPO75-D8E1-2SL1

Lifesafety Power FPO75-D8E1-2SL1 75W 8 Aux Outputs

75W distributed power supply designed for hardwired access control installations where field-mounted 12V and 24V power distribution is required

• Dual-voltage output (12VDC/6A or 24VDC/3A) matches most door controllers and locks.
• Eight auxiliary outputs distribute power to multiple devices from one 75W enclosure.
• Two integrated Salto plates simplify field mounting for Salto-compatible deployments.

Lifesafety Power · FPO75-D8E1

Lifesafety Power FPO75-D8E1 8 Aux Outputs

75W regulated power supply designed to distribute auxiliary power across networked security systems requiring redundant or independent feeds to door

• Eight independently fused outputs prevent cascade failures when a single load shorts.
• Supports 6A per output at 12V or 3A per output at 24V for mixed-voltage deployments.
• 75W regulated budget powers door strikes, sensors, and relay circuits from one cabinet unit.

Lifesafety Power · FPO75-C8PE1

Lifesafety Power FPO75-C8PE1 8 Lock Outputs

75W class 2 power-limited supply designed to feed multiple electromagnetic or solenoid locks in distributed door-control installations

• 8 independent 2.5A lock outputs eliminate per-output fusing under Class 2 rating.
• Selectable 12V/6A or 24V/3A output supports maglocks and solenoid strikes in one unit.
• 75W wall-mount supply fits retrofit and new-build access control cabinets on 120V AC.

Lifesafety Power · FPO75-C8PD8PE2

Lifesafety Power FPO75-C8PD8PE2 - FPO75

Unified access control power supply designed for compact, single-voltage deployments requiring fire alarm integration and multi-zone relay switching

• 75W single-voltage output supports up to 8 relay lock zones at 2.5A Class 2 each.
• FAI input auto-unlocks doors on fire alarm signal with integrated override prevention.
• Wall-mount enclosure (20×16×4.5 in) consolidates power, backup, and surge protection.

Lifesafety Power · FPO75-C8E4M

Lifesafety Power FPO75-C8E4M 75W Power Supply

75W board-mounted power distribution module designed to serve small-to-medium security deployments that require centralized DC power rather than

• Selectable 12VDC or 24VDC output adapts to endpoint voltage requirements per install.
• 75W budget delivers 6A at 12V or 3A at 24V for cameras, readers, and door strikes.
• Board-mount form factor integrates directly into power cabinets without external housing.

Lifesafety Power · FPO75-C8E2M

Lifesafety Power FPO75-C8E2M 75W Power Supply

75W power distribution module designed to supply regulated 12V and 24V outputs to networked security and life-safety equipment

• Delivers 75W at 6A/12VDC or 3A/24VDC to match mixed-voltage load requirements.
• Board-level format enables compact integration into custom enclosures or retrofit cabinets.
• Dual-voltage output reduces the need for separate supplies in camera and access control deployments.

Lifesafety Power · FPO75-C8E2

Lifesafety Power FPO75-C8E2 FPO75-C8E2

12VDC power supply designed to support surveillance camera installations and access control systems requiring distributed 12-volt power delivery

• Delivers 12VDC output to support analog and IP cameras plus access control loads.
• Multi-output design centralizes power distribution, reducing field wiring complexity.
• Compatible with 110–240VAC input, simplifying deployment across regional installations.

Lifesafety Power · FPO75-C8E1M

Lifesafety Power FPO75-C8E1M 8 Relay

75W regulated power supply board designed for access-control and door-lock deployments requiring independent circuit isolation and multi-load

• Eight independently fused 3A relay outputs prevent a single fault from disrupting other circuits.
• Supports 12V (6A) or 24V (3A) operation, eliminating external converters on mixed-voltage sites.
• Pre-installed Mercury/Lenel backplate allows direct cabinet mounting with no custom fabrication.

Lifesafety Power · FPO75-C8D8E6M1

Lifesafety Power FPO75-C8D8E6M1 75W 8 Relay

Regulated 75W AC-to-DC power supply engineered for access control and life-safety door lock systems

• Dual-voltage output (6A/12V or 3A/24V) matches lock hardware without added converters.
• Eight independently fused 3A relay outputs handle failsafe/failsecure per door, no relay panel needed.
• Eight auxiliary DC outputs assignable to Bus1 or Bus2 isolate REX and sensor power from lock rails.

Lifesafety Power · FPO75-C8D8E2

Lifesafety Power FPO75-C8D8E2 Single Voltage Switchmode

75W single voltage offline switchmode supply engineered for distributed access control loads across 8 independent door circuits

• 8 independently fused 3A lock outputs prevent a single short from cascading to adjacent doors.
• 75W envelope supports 12V @ 6A or 24V @ 3A — covers 3–6 strikes plus readers in one unit.
• 8 additional 3A auxiliary circuits power readers and REX sensors with isolated protection.

Lifesafety Power · FPO75-C8D8E1

Lifesafety Power FPO75-C8D8E1 8 Lock 8 Auxiliary Outputs Fused

75W cabinet-mount power distribution unit designed to provision and supervise multiple low-voltage security devices from a central location

• Eight independently fused 3A auxiliary outputs prevent a single fault from dropping the panel.
• Supports 12VDC or 24VDC topologies, covering standard strikes, mag locks, and card readers.
• 75W cabinet-mount form factor fits single-building or multi-zone access control deployments.

Lifesafety Power · FPO75-C4PE2M

Lifesafety Power FPO75-C4PE2M QUICK GUIDE Mercury Backplat

Reference guide document designed for integrators deploying Lifesafety Power equipment with Mercury Backplate architecture

• Consolidates wiring diagrams and specs to accelerate Mercury Backplate deployments.
• Covers voltage, amperage, battery backup, and supervision signaling in one reference.
• Keep on-site for faster troubleshooting of Lifesafety Power access control systems.

Lifesafety Power · FPO75-C4PD8PE4M/T4-A

Lifesafety Power FPO75-C4PD8PE4M/T4-A 75W Single

UL-listed power distribution platform designed for access control and life-safety applications where prewired integration, fault tolerance, and

• 75W at 120V AC powers up to 4 lock outputs plus 8 auxiliary zones in one enclosure.
• Integrated fire alarm disconnect auto-unlocks doors without external relays or wiring.
• Built-in battery charger with low-cutoff protects backup batteries during extended outages.

Lifesafety Power · FPO75-C4PD8PE2M

Lifesafety Power FPO75-C4PD8PE2M 75W 6A/12V

Four-output 12VDC power supply designed to distribute backup power across multiple access control readers, door locks, and small-scale security

• Four independent 12VDC outputs isolate high-current locks from sensitive reader circuits.
• 75W capacity at 6A/12VDC supports multiple access control endpoints from a single board.
• 120VAC input suits standard commercial utility supply for straightforward panel integration.

Lifesafety Power · FPO75-C4PD8PE1M

Lifesafety Power FPO75-C4PD8PE1M Power supply board 75W 6A/12V

75W board-mount power supply configured for 6A at 12V or 3A at 24V — designed to feed access control systems, door locks, and auxiliary loads in

• Delivers 75W at 6A/12V or 3A/24V to support multi-door access control loads.
• Provides 4 relay lock outputs plus 8 auxiliary DC outputs, each class 2 limited at 2.5A.
• Mercury/Lenel backplate compatibility simplifies retrofit and new-build panel integration.