Switch Modules

Plan Your Deployment

Switch model compatibility and supported module types
Fiber type selection (single-mode vs multi-mode)
Distance requirements and transceiver range
Uplink speed requirements (1G, 10G, etc.)
Network design and redundancy planning

Showing Results for Switch Modules

Compare

Out of stock
Veracity

SKU: VLS-1U

Veracity VLS-1U LONGSPAN PoE Extender SFP Module Switch

24-port SFP switch extends PoE across fiber for remote cameras
Special Order · Ships in 2-3 weeks

$88.13 $84.99 Save $3.14

Add to Cart
The item has been added
Free shipping over $499

$88.13 $84.99 Save $3.14

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AW-GEL-105A-110

Vivotek AW-GEL-105A-110 8-Port Gigabit PoE High Power + 1-Port SFP Lite 110 W Managed Switch

8-port Gigabit PoE switch with 110W budget for IP surveillance
- Two 90W high-power ports plus six 30W ports for mixed camera loads
- 20 Gbps switching bandwidth with managed VLAN, QoS, and STP support
- 4KV surge protection per port; 1x SFP uplink for fiber connectivity
Special Order · Ships in 2-3 weeks

$300.00 $213.99 Save $86.01

Add to Cart
The item has been added
Free shipping over $499

$300.00 $213.99 Save $86.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: AW-GEL-285A-380

Vivotek AW-GEL-285A-380 24-Port Gigabit PoE High Power + 2-Port SFP Lite 380W Managed Switch

24-port PoE switch with 380W budget for surveillance and access control
- 4 ports at 90W + 20 ports at 30W for high-demand cameras and access points
- 56 Gbps switching bandwidth with 4,096 VLAN IDs and QoS traffic management
- Per-port PoE control, auto-checking, 4kV surge protection, and extended 250M mode
Special Order · Ships in 2-3 weeks

$800.00 $569.99 Save $230.01

Add to Cart
The item has been added
Free shipping over $499

$800.00 $569.99 Save $230.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-1000-CPTX-X1

Vivotek SFP-1000-CPTX-X1 Gigabit SFP to RJ45 Converter

Gigabit SFP-to-RJ45 converter for fiber-to-copper network bridging
- 1.25 Gbps 1000BASE-T over Cat.5e/Cat.6 cable up to 100 meters
- Auto-negotiation and Auto-MDI/MDI-X support for plug-and-play setup
- Compact 68.3 x 13.7 x 13.8 mm form factor rated 0°C to 70°C
Special Order · Ships in 2-3 weeks

$119.00 $84.99 Save $34.01

Add to Cart
The item has been added
Free shipping over $499

$119.00 $84.99 Save $34.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-1000-SM13-10I

Vivotek SFP-1000-SM13-10I Industrial Gigabit SFP Module

1.25G singlemode SFP for 10km industrial fiber runs, -40°C to 85°C
- 1.25 Gbps data rate over 9/125μm singlemode fiber up to 10 kilometers
- Operates reliably -40°C to 85°C for outdoor and harsh industrial sites
- LC singlemode connector with 1310nm wavelength, MSA compliant module
Special Order · Ships in 2-3 weeks

$73.00 $51.99 Save $21.01

Add to Cart
The item has been added
Free shipping over $499

$73.00 $51.99 Save $21.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-1000-SM13-40

Vivotek SFP-1000-SM13-40 40KM Gigabit SFP Module

40km singlemode SFP for long-range gigabit fiber networks
- 1.25 Gbps gigabit ethernet over 9/125μm singlemode fiber to 40km
- 1310nm wavelength with LC connector for standard network equipment
- Operates 0°C to 70°C; MSA compliant for broad device compatibility
Special Order · Ships in 2-3 weeks

$86.00 $60.99 Save $25.01

Add to Cart
The item has been added
Free shipping over $499

$86.00 $60.99 Save $25.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-1000-SM13-40I

Vivotek SFP-1000-SM13-40I Industrial 40KM SFP Transceiver

40km singlemode SFP for long-distance fiber surveillance networks
- 1.25 Gbps Gigabit data rate over 9/125μm singlemode fiber to 40km
- Industrial-grade operation from -40°C to 85°C in outdoor deployments
- LC connector, 1310nm wavelength, MSA compliant for broad compatibility
Special Order · Ships in 2-3 weeks

$91.00 $64.99 Save $26.01

Add to Cart
The item has been added
Free shipping over $499

$91.00 $64.99 Save $26.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-1000-MM13-02

Vivotek SFP-1000MM13X2 Gigabit Multimode SFP Module

1.25 Gbps multimode SFP for surveillance networks up to 2km
- 1.25 Gbps Gigabit data rate with 1300/1310 nm wavelength for HD video
- Reaches 2 kilometers over 50/125µm and 62.5/125µm multimode fiber
- LC connectors, MSA compliant, operates 0°C to 70°C
Special Order · Ships in 2-3 weeks

$55.00 $38.99 Save $16.01

Add to Cart
The item has been added
Free shipping over $499

$55.00 $38.99 Save $16.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-1000-MM13-02I

Vivotek SFP-1000MM13X2I Industrial Gigabit SFP Module

Industrial multimode SFP for gigabit links up to 2km in extreme temps
- 1.25 Gbps data rate on multimode fiber (50/125µm, 62.5/125µm)
- Operates reliably from -40°C to 85°C in harsh industrial environments
- LC connector with 2km transmission range for distributed deployments
Special Order · Ships in 2-3 weeks

$73.00 $51.99 Save $21.01

Add to Cart
The item has been added
Free shipping over $499

$73.00 $51.99 Save $21.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-1000-MM85-X5

Vivotek SFP-1000MM85X5 Gigabit Multimode SFP Module

1.25 Gbps multimode SFP for fiber surveillance networks up to 500m
- 850 nm VCSEL laser with 1.25 Gbps data rate over multimode LC fiber
- Reaches 500 meters on 50/125µm or 62.5/125µm multimode cable types
- MSA-compliant, hot-pluggable module with 0°C to 70°C operating range
Special Order · Ships in 2-3 weeks

$50.00 $34.99 Save $15.01

Add to Cart
The item has been added
Free shipping over $499

$50.00 $34.99 Save $15.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-1000-MM85-X5I

Vivotek SFP-1000MM85X5I Gigabit Multimode SFP Module

1.25 Gbps multimode SFP for -40°C to 85°C industrial networks
- 1.25 Gbps data rate with 850 nm VCSEL over multimode fiber to 0.5 km
- Operates reliably across -40°C to 85°C, rated for harsh humidity (5–90%)
- LC connector, MSA compliant, plug-and-play installation with no config needed
Special Order · Ships in 2-3 weeks

$60.00 $42.99 Save $17.01

Add to Cart
The item has been added
Free shipping over $499

$60.00 $42.99 Save $17.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-1000-SM13-10

Vivotek SFP-1000SM13X10 1G Single Mode SFP Transceiver

1.25 Gbps single-mode SFP for surveillance networks up to 10 km
- 1310 nm wavelength reaches 10 km on 9/125μm single-mode fiber
- LC duplex connectors with Fabry-Perot laser for stable long-distance links
- 3.3V low-power operation; MSA-compliant for broad equipment compatibility
Special Order · Ships in 2-3 weeks

$55.00 $38.99 Save $16.01

Add to Cart
The item has been added
Free shipping over $499

$55.00 $38.99 Save $16.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-2000-MM85-X3

Vivotek SFP-2000-MM85-X3 10G Multimode SFP Module

10G multimode SFP+ module for short-range fiber links up to 300m
- 10 Gigabit Ethernet over 50/125μm multimode fiber with LC connector
- 850nm VCSEL laser with -1 to -9.9 dBm Rx sensitivity, 3.3V operation
- MSA-compliant, hot-swappable design; operates 0°C to 70°C
Special Order · Ships in 2-3 weeks

$144.00 $102.99 Save $41.01

Add to Cart
The item has been added
Free shipping over $499

$144.00 $102.99 Save $41.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-2000-SM13-10

Vivotek SFP-2000-SM13-10 10G Singlemode LC SFP Module

10G singlemode SFP+ module for long-distance fiber links up to 10 km
- 10 Gbps data rate with 1310 nm DFB laser over singlemode fiber
- Reaches 10 km transmission distance on 9/125μm singlemode cable
- LC connector, MSA-compliant, operates 0°C to 70°C
Special Order · Ships in 2-3 weeks

$228.00 $161.99 Save $66.01

Add to Cart
The item has been added
Free shipping over $499

$228.00 $161.99 Save $66.01

Add to quote Compare
Compare

Out of stock
Vivotek

SKU: SFP-1000-CPTX-X1I

Vivotek SFP1000CPTX X1I Industrial Gigabit SFP Converter

Industrial SFP-to-RJ45 converter for Gigabit fiber-to-copper links
- 1000 Mbps Gigabit over 100m Cat.5e/Cat.6 with auto-negotiation
- Operates -40°C to 85°C in harsh industrial environments
- MSA-compliant SFP module with auto-MDI/MDI-X for plug-and-play setup
Special Order · Ships in 2-3 weeks

$142.00 $100.99 Save $41.01

Add to Cart
The item has been added
Free shipping over $499

$142.00 $100.99 Save $41.01

Add to quote Compare

What to Look For When Buying

The decisions that matter most before you spec.

Match Module Type to Switch Chassis & Port Density

Switch modules must be compatible with your base switch hardware—verify slot types (SFP, QSFP, fixed vs. modular). Network collapse at the core often stems from mismatched uplink modules or insufficient expansion capacity when adding cameras to existing infrastructure.

Fiber Distance & Multimode vs. Single-Mode Selection

Single-mode fiber modules (9/125 µm) reach 10+ km; multi-mode (50/125 or 62.5/125 µm) typical to 2km. Choose based on inter-building distance and backbone topology. Wrong fiber type wastes budget and creates signal attenuation that degrades video frame rate and reliability across distributed sites.

Power Budget & PoE Scaling Across Modular Builds

Modular switches with integrated PoE modules must provide sufficient power delivery per port and across the entire stack. PoE budget planning becomes critical when clustering switches; undersized modules cause camera dropout and cascading system failures during peak recording.

Redundancy & Stacking for Mission-Critical Surveillance

Stacking modules and redundancy cards allow N+1 failover in surveillance backbones, preventing single points of failure. System failures during incidents are often caused by non-redundant core infrastructure; modular stacking protects uptime when incidents demand continuous monitoring.

Temperature & Environmental Hardening

Comnet and Transition Networks offer industrial-grade modules rated for -40°C to +70°C and conformal coating for outdoor or damp enclosures. Surveillance systems in uncontrolled environments require modules rated beyond commercial office specs to avoid thermal shutdown or corrosion.

Future Capacity Planning & Modular Growth

Select switches and modules with empty expansion slots to avoid forklift upgrades. Systems often exceed rated capacity within 2–3 years; modular architecture lets you add fiber uplinks or PoE cards without replacing the entire switch when scaling from 20 to 200+ cameras.

Technology Stack

The specs and acronyms that actually affect switch modules performance.

SFP / SFP+ / QSFP Transceivers

Small Form Factor pluggable modules that convert electrical signals to fiber optics (or vice versa). SFP handles 1 Gbps, SFP+ handles 10 Gbps, QSFP+ handles 40+ Gbps. Correct transceiver type matches your switch ports and bandwidth needs; mismatched modules won't seat or will downgrade performance.

Single-Mode vs. Multi-Mode Fiber

Single-mode (SMF, 9/125 µm core) supports 10+ km distances at lower cost per km but requires precision alignment; multi-mode (MMF, 50/125 µm) supports shorter distances (typically 300m–2km) with easier installation. Choose based on building spacing and budget; wrong choice means expensive rework or signal loss.

Port Density & Slot Type Compatibility

Modular switches have fixed slot configurations (e.g., 4-slot chassis accepts modules with specific form factors). Verify your base switch model supports the module you're ordering; plugging an SFP+ module into an SFP-only slot will not work and delays deployment.

Stacking Bandwidth & Backplane Throughput

Stacking cables and modules interconnect multiple switches into one logical unit with aggregated bandwidth. Insufficient backplane throughput (e.g., 48 Gbps backplane on switches with 48×1Gbps ports) creates bottlenecks between stacked units and limits surveillance backbone capacity.

PoE Power Budget Per Module & Chassis

PoE modules supply up to 30W per port (PoE+) or 95W per port (PoE++). Verify your module's total power delivery and the switch's power supply capacity; PoE injectors can augment undersized modules for camera-heavy deployments.

Managed vs. Unmanaged Module Features

Managed modules support VLAN tagging, spanning tree (STP), link aggregation, and SNMP monitoring; unmanaged are plug-and-play. Surveillance networks benefit from managed features to isolate camera traffic, ensure failover, and monitor uplink health during incidents.

Typical Deployment Scenarios

Multi-Building Campus with 300+ IP Cameras

Three buildings 500m apart connected via media converters and single-mode fiber modules. Core stack: 2× managed switches with stacking modules, each with 4 SFP+ uplink modules (10 Gbps each) and integrated PoE cards supplying 960W per switch. Redundancy ensures building isolation if one core switch fails. Core network design prevents collapse under concurrent recording.

K-12 School District: Classroom + Perimeter Expansion

Elementary school adds 80 cameras in phases. Start with one managed switch (12 fixed PoE ports), upgrade to modular chassis with 2 PoE modules (48 additional PoE ports) and 1 fiber uplink module to connect the high school 2km away. K-12 surveillance design recommends staged modular expansion to match budget cycles without downtime.

Warehouse + Loading Dock: Data Capture Across Three Zones

Distributed warehouse data capture system with 150 IP cameras and RFID readers across climate-controlled zones. Core: industrial-grade Transition Networks modular switch with 4 PoE modules (120 cameras + 30 IoT devices). Fiber modules uplink to routers in central monitoring room. Temperature-hardened modules resist dock condensation and freezer environments.

High-Density Edge Deployment: 200 Cameras, Single Ceiling Cabinet

Compact surveillance node: 1 managed switch with 4 SFP+ fiber modules and 2 PoE modules stacked in U-space. Axis cameras feed into local PoE modules; fiber uplinks carry traffic to central video storage and access control core. Single module failure doesn't cascade; redundant power supplies prevent module dropout during events.

Frequently Asked Questions

What is the difference between SFP and SFP+ switch modules?

SFP (Small Form Factor Pluggable) transceivers handle 1 Gbps over copper or fiber; SFP+ handles 10 Gbps. Both fit the same form factor but are not cross-compatible—an SFP module will not work at full speed in an SFP+ slot, and vice versa. Always match transceiver speed to your switch's port rating and your bandwidth demand. For surveillance backbones carrying 50+ 4K cameras, 10 Gbps SFP+ modules prevent congestion.

How do I know if a switch module is compatible with my switch?

Check your switch's model number and documentation for supported module types (SFP, QSFP, PoE vs. line-card modules). Verify slot count, port count, and power budget. Comnet and Transition Networks publish detailed compatibility matrices; contact Ask an Expert if your model is not clearly documented. Incompatible modules will not seat or will error-out during startup.

What fiber distance do I need: single-mode or multi-mode?

Single-mode fiber reaches 10+ km reliably; multi-mode is typically 300m–2km depending on grade and wavelength. Measure the distance between your switch locations (including vertical runs in stacked buildings). For distances under 500m, multi-mode is cost-effective; over 1km, single-mode becomes competitive in total cost. Wrong choice results in signal loss, dropped frames, or camera disconnects.

Can I stack switch modules from different manufacturers?

Most industrial switches support vendor-agnostic stacking via standard stacking cables and backplanes, but verify before purchase. Transition Networks and Comnet industrial modules often support cross-vendor stacking under same protocol (e.g., Ethernet stacking). Consumer-grade modules typically require matching brands. Always confirm in the switch datasheet to avoid a non-functional stack.

How much power do PoE switch modules consume and supply?

Standard PoE (15.4W per port, 30W total per port including switch overhead) and PoE+ (30W per port, 60W total) are typical ratings. A 12-port PoE module can supply ~360W; verify your power supply and UPS can handle total module load plus redundancy margin. For 100+ cameras, plan 5–10W per camera average draw; undersized modules cause brown-out and dropout. PoE budget planning guide details sizing.

What is stacking, and why do I need it for surveillance?

Stacking interconnects multiple switches via high-speed backplane cables, creating one logical switch with aggregated bandwidth and failover. If one physical switch fails, traffic reroutes through remaining units. For surveillance, stacking prevents single points of failure in the backbone; system failures during incidents are often caused by core switch collapse. Redundant stacking is critical for mission-critical deployments like access control integration and continuous recording.

Plan Your Deployment

Showing Results for Switch Modules

Veracity VLS-1U LONGSPAN PoE Extender SFP Module Switch

Vivotek AW-GEL-105A-110 8-Port Gigabit PoE High Power + 1-Port SFP Lite 110 W Managed Switch

Vivotek AW-GEL-285A-380 24-Port Gigabit PoE High Power + 2-Port SFP Lite 380W Managed Switch

Vivotek SFP-1000-CPTX-X1 Gigabit SFP to RJ45 Converter

Vivotek SFP-1000-SM13-10I Industrial Gigabit SFP Module

Vivotek SFP-1000-SM13-40 40KM Gigabit SFP Module

Vivotek SFP-1000-SM13-40I Industrial 40KM SFP Transceiver

Vivotek SFP-1000MM13X2 Gigabit Multimode SFP Module

Vivotek SFP-1000MM13X2I Industrial Gigabit SFP Module

Vivotek SFP-1000MM85X5 Gigabit Multimode SFP Module

Vivotek SFP-1000MM85X5I Gigabit Multimode SFP Module

Vivotek SFP-1000SM13X10 1G Single Mode SFP Transceiver

Vivotek SFP-2000-MM85-X3 10G Multimode SFP Module

Vivotek SFP-2000-SM13-10 10G Singlemode LC SFP Module

Vivotek SFP1000CPTX X1I Industrial Gigabit SFP Converter

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Switch Modules

Frequently Asked Questions

Related Categories

Engineering Reading