Refine by

No filters applied

Sub categories

Mesh Wifi Systems

66 items

Modems

9 items

Network Storage (NAS)

16 items

PoE Switches

62 items

Server Components & Options

0 item

Server Drives & Storage

0 item

Server Memory

0 item

Server Processors

0 item

Workstations

0 item

Accessories

163 items

Antennas & Radios

109 items

Digital Signage

5 items

Extenders & Repeaters

299 items

Fiber & GPON

1069 items

Media Converters

281 items

Network Attached Storage

12 items

Network Management

3 items

Network Switches

1039 items

Routers & Gateways

344 items

Sensors & IoT

111 items

Switch Modules

369 items

UISP Service Provider

19 items

Wireless Access Points

96 items

Wireless Bridges

84 items

AI & Data Center Compute

0 item

Cable Management & Pathways

361 items

KVMs & Console Servers

13 items

Patch Panels & Network Cabling

134 items

Server Racks & Cabinets

506 items

Servers

6 items

Showing Results for Infrastructure

Compare

Add to Cart The item has been added
NETGEAR

SKU: GSM4212UX-100NAS

NETGEAR M4250-10G2XF-POE++ Managed Switch - GSM4212UX-100NAS
- 12 PoE++ ports deliver up to 90W each, eliminating injectors for PTZ and multi-sensor cameras.
- Two 10G SFP+ uplinks prevent bandwidth bottleneck when aggregating traffic from all 12 endpoints.
- 802.3bt backward compatibility lets you mix legacy PoE, PoE+, and PoE++ devices on one switch.
$1,939.29 $1,190.99 Save $748.30

Add to Cart
The item has been added
Free shipping over $499

$1,939.29 $1,190.99 Save $748.30

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: MSM4214X-TAANAS

NETGEAR M4250-12M2XF Managed Switch TAA - MSM4214X-TAANAS
- TAA-compliant sourcing satisfies federal and government procurement mandates.
- Layer 2/3 management via CLI, Web GUI, and SNMP v1/v2c/v3 for full operational control.
- VLAN segmentation isolates critical network segments and contains broadcast traffic.
$1,708.95 $962.99 Save $745.96

Add to Cart
The item has been added
Free shipping over $499

$1,708.95 $962.99 Save $745.96

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: XSM4216F-100NAS

NETGEAR M4250-16XF 16X1G/10G Fiber Sfp+ MGD - XSM4216F-100NAS
- 16 hot-pluggable SFP+ ports support 1G and 10G on the same slot without rebooting.
- Single-mode and multi-mode fiber reach up to 10km, eliminating copper distance limits.
- Per-port SNMP/CLI monitoring of RX/TX power and transceiver health on M4250 hosts.
$1,752.40 $1,062.99 Save $689.41

Add to Cart
The item has been added
Free shipping over $499

$1,752.40 $1,062.99 Save $689.41

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: GSM4230PX-TAANAS

NETGEAR M4250-26G4XF-POE+ Managed Switch TAA - GSM4230PX-TAANAS
- 26 PoE+ ports deliver up to 30W each, eliminating field power supplies per device.
- Four 10G SFP+ uplinks prevent bottlenecks across 26 simultaneous powered endpoints.
- TAA-compliant design qualifies for federal and government procurement contracts.
$3,041.36 $1,691.99 Save $1,349.37

Add to Cart
The item has been added
Free shipping over $499

$3,041.36 $1,691.99 Save $1,349.37

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: XSM4324CS-100NES

NETGEAR M4300-24X 24 Port 10 Gigabit Managed - XSM4324CS-100NES
- 24x 10GbE ports deliver 480 Gbps non-blocking throughput for dense 4K camera deployments.
- Native Layer 3 routing segments video, access control, and management traffic without external appliances.
- SNMP v3, RADIUS, SSH, and Syslog support meet enterprise access control and monitoring requirements.
$5,358.60 $3,223.99 Save $2,134.61

Add to Cart
The item has been added
Free shipping over $499

$5,358.60 $3,223.99 Save $2,134.61

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: XSM4348S-100NES

NETGEAR M4300-24X24F Managed Switch - XSM4348S-100NES
- 48 × 10GbE ports handle high-density camera and edge-device deployments without bottlenecks.
- 720W PoE budget powers 40–50 cameras or APs simultaneously, eliminating supplementary PSUs.
- Layer 3 routing with VLAN support isolates camera, access-control, and management traffic natively.
$8,689.64 $5,226.99 Save $3,462.65

Add to Cart
The item has been added
Free shipping over $499

$8,689.64 $5,226.99 Save $3,462.65

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: GSM4328PA-100NES

NETGEAR M4300-28G-POE+ Managed Swch APS550W - GSM4328PA-100NES
- 28 PoE+ ports at 30W each power cameras, APs, and readers from a single 1U switch.
- 550W integrated power budget supports 18–20 simultaneous full-draw 30W devices.
- L3 management via CLI, web GUI, and SNMP enables VLAN, QoS, and per-port PoE monitoring.
$2,870.26 $1,888.99 Save $981.27

Add to Cart
The item has been added
Free shipping over $499

$2,870.26 $1,888.99 Save $981.27

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: XSM4348CS-100NES

NETGEAR M4300-48X 48 Port 10 Gigabit Managed - XSM4348CS-100NES
- All 48 ports run full 10GbE—no uplink-only restrictions in high-density deployments.
- 960 Gbps non-blocking fabric sustains 50+ 4K camera streams without packet loss.
- Stack up to 8 units as one logical switch with unified management and auto-failover.
$10,137.91 $6,097.99 Save $4,039.92

Add to Cart
The item has been added
Free shipping over $499

$10,137.91 $6,097.99 Save $4,039.92

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: XSM4396K0-10000S

Netgear M4300-96X Modular Managed Switch - XSM4396K0-10000S
- Modular chassis accepts line cards so you scale from 48 to 96 ports without a forklift upgrade.
- CLI, Web GUI, and SNMPv1/v2c/v3 support enables full NOC integration and per-port monitoring.
- 2GB RAM supports routing tables, VLAN databases, and syslog buffers in enterprise deployments.
$7,675.84 $5,381.99 Save $2,293.85

Add to Cart
The item has been added
Free shipping over $499

$7,675.84 $5,381.99 Save $2,293.85

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: VSM4320C-100NES

NETGEAR M4350-16V4C Managed Switch - VSM4320C-100NES
- 16 multi-gigabit ports handle concurrent camera, access control, and IoT traffic without contention.
- Layer 3 managed switching enables VLAN isolation of camera streams from guest or admin traffic.
- CLI, web GUI, and SNMP access integrates with NVR workflows for centralized link and policy management.
$12,258.60 $7,835.99 Save $4,422.61

Add to Cart
The item has been added
Free shipping over $499

$12,258.60 $7,835.99 Save $4,422.61

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: VSM4320C-TAANES

NETGEAR M4350-16V4C Managed Switch TAA - VSM4320C-TAANES
- 16 PoE ports plus 4 SFP+ 10G uplinks handle dense camera and AP deployments.
- TAA-compliant design satisfies federal and defense procurement requirements.
- Layer 2/3 VLAN and QoS isolate video traffic from corporate and guest networks.
$15,641.36 $9,408.99 Save $6,232.37

Add to Cart
The item has been added
Free shipping over $499

$15,641.36 $9,408.99 Save $6,232.37

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: MSM4328F-TAANES

NETGEAR M4350-24F4X Managed Switch TAA - MSM4328F-TAANES
- TAA-compliant design clears federal and state procurement requirements without delays.
- 24 fixed ports plus 4 SFP+ uplinks support multi-tier aggregation and high-speed backhaul.
- Layer 3 management via CLI, Web GUI, and SNMP v1/v2c/v3 enables VLAN and QoS control.
$6,372.40 $4,383.99 Save $1,988.41

Add to Cart
The item has been added
Free shipping over $499

$6,372.40 $4,383.99 Save $1,988.41

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: XSM4328CV-TAANES

NETGEAR M4350-24X4V Managed Switch TAA - XSM4328CV-TAANES
- 24x 10G ports deliver wire-rate throughput for NVRs, servers, and storage nodes.
- Four 40G uplinks aggregate full switch traffic upstream without congestion.
- TAA-compliant; qualifies for US government procurement in compliance-sensitive networks.
$6,951.71 $4,181.99 Save $2,769.72

Add to Cart
The item has been added
Free shipping over $499

$6,951.71 $4,181.99 Save $2,769.72

Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: XSM4340V-TAANES

NETGEAR M4350-24X8F8V Managed Switch TAA - XSM4340V-TAANES
- 24x 10G SFP+ ports deliver line-rate throughput per server, eliminating uplink bottlenecks.
- 8x 25G uplink ports scale switch fabric beyond 240 Gbps without oversubscription.
- Layer 3 management via CLI, Web GUI, and SNMP supports 4094 VLANs for traffic isolation.
$10,427.57 $6,272.99 Save $4,154.58

Add to Cart
The item has been added
Free shipping over $499

$10,427.57 $6,272.99 Save $4,154.58

Add to quote Compare
Compare

Add to Cart The item has been added
NETGEAR

SKU: XSM4340FV-100NES

NETGEAR M4350-32F8V Managed Switch - XSM4340FV-100NES
- 32 Gigabit PoE+ ports eliminate external injectors across dense camera deployments.
- Layer 3 VLAN and QoS support segments camera, access control, and data traffic on-switch.
- Hot-swap dual PSU slots enable zero-downtime power maintenance in live environments.
$7,386.19 $4,874.99 Save $2,511.20

Add to Cart
The item has been added
Free shipping over $499

$7,386.19 $4,874.99 Save $2,511.20

Add to cart Add to quote Compare
Compare

Out of stock
NETGEAR

SKU: XSM4340CV-100NES

NETGEAR M4350-36X4V Managed Switch - XSM4340CV-100NES
- 36× 10GbE ports eliminate port exhaustion across dense camera and edge-device deployments.
- 4× 40GbE uplinks sustain multi-100Gbps aggregate throughput for high-bitrate 4K video streams.
- Integrated PoE budget powers PoE+/PoE++ cameras and PTZ heads without external injectors.
$10,392.57 $6,823.99 Save $3,568.58

Add to Cart
The item has been added
Free shipping over $499

$10,392.57 $6,823.99 Save $3,568.58

Add to quote Compare

Infrastructure

Infrastructure components provide the network and power backbone that supports reliable surveillance and access control systems. Select switches, PoE devices, power supplies, and transmission hardware designed for commercial environments.

Plan Your Deployment

Total PoE power budget and port density requirements
Switch throughput and uplink capacity planning
Redundancy and failover design considerations
Distance limitations and fiber conversion needs
Power conditioning and voltage compatibility

PoE Planning Guide Get Sizing Help

What to Look For When Buying

The six decisions that matter most before you spec.

PoE Power Budget Math

A 24-port PoE+ switch with 370W total budget can't actually run 24 outdoor cameras at peak 25W each. Simultaneous peak — not nameplate — is the limit. Always verify per-port PoE allocation and total budget against actual camera load. See PoE budget planning and why your PoE switch fails after 18 cameras.

328-Foot Ethernet Limit

Cat5e, Cat6, and Cat6A all top out at 100 meters (328ft) per TIA-568. Past that, you need a media converter to fiber, a PoE extender, or an intermediate switch. Common gotcha: in-wall patch + faceplate + drop + jumper all count against 328ft. Long runs to perimeter cameras frequently exceed the limit — plan for fiber or coax-PoE extension.

Managed vs Unmanaged Switches

Unmanaged switches work for small deployments but provide no VLAN segmentation, no QoS for video traffic, no monitoring, and no remote troubleshooting. Managed switches (Layer 2 or Layer 3) let you isolate cameras on a dedicated VLAN, prioritize video over office traffic, and diagnose link failures from a central SNMP platform. Spec managed for any deployment over 8 cameras.

UPS Sizing & Runtime

NVR + switches + cameras + access control have very different power profiles than office gear. Size UPS for actual wattage of all connected loads + 20% headroom, and calculate runtime with battery-life curves (runtime is non-linear — doubling load often cuts runtime 60%+). Surveillance UPS should provide 15-30 min to accommodate generator transfer or graceful shutdown.

Copper vs Fiber Uplinks

In-rack uplinks on 10G copper (Cat6A) work fine for short runs. Between-building and multi-floor uplinks should be fiber — single-mode for >300m, multimode for under. Fiber is also electrically isolated, which matters in lightning-prone environments. Axis, Hanwha, and Ubiquiti switches include SFP/SFP+ uplinks across most models.

Cooling & Airflow in Racks

Surveillance gear runs 24/7 — a closed rack at 90°F interior temperature will fail drives and switches faster than spec. Specify perforated doors, rack-mount fans, and leave 1U of airflow gap above/below heat-generating equipment. NVRs with internal fans need front-to-back airflow; network switches vary by vendor. Check thermal spec before sealing a wall-mount enclosure.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

802.3af / at / bt PoE Standards

802.3af = 15.4W/port (entry cameras), 802.3at PoE+ = 25.5W/port (most outdoor cameras), 802.3bt PoE++ Type 3 = 60W, Type 4 = 90W (PTZ, heated, multi-sensor). Specify switch support for the highest standard your cameras need — future-proofing with PoE++ switches costs marginally more.

TIA-568 Cabling Standards

Cat5e rated to 1 Gbps at 100m. Cat6 rated to 10 Gbps at 55m, 1 Gbps at 100m. Cat6A rated to 10 Gbps at 100m with proper grounding. Use Cat6A for new surveillance cabling runs — marginal cost premium over Cat6, meaningful margin for long runs + high PoE.

SFP / SFP+ / QSFP+ Modules

Small Form-factor Pluggable optics for fiber uplinks. SFP = 1 Gbps, SFP+ = 10 Gbps, QSFP+ = 40 Gbps. Match module to switch vendor compatibility (some vendors lock to their own brand of optics). Multimode fiber with OM3/OM4 for ≤300m, single-mode for longer or future-proof runs.

VLAN Segmentation

Dedicated VLAN for surveillance isolates camera traffic from office network — improves security (camera-to-camera lateral movement blocked), performance (no contention with office traffic), and troubleshooting. Configure access-control and intercom VLANs separately. Managed switches required; unmanaged switches cannot segment.

Long-Reach PoE Extension

Ethernet-over-Coax (EoC) extends Ethernet + PoE to 1,500+ feet over existing RG59 coax — ideal for analog-to-IP retrofits. Ethernet-over-UTP extenders push runs to 4,000ft over CAT cable. NVT Phybridge CHARIoT, Altronix eBridge, and Veracity Highwire are the common product families. Rate-limited to 100 Mbps typically.

UPS Topology: Line-Interactive vs Double-Conversion

Line-interactive UPS switch to battery on power failure — sufficient for office gear. Double-conversion (online) UPS convert AC→DC→AC continuously, providing perfectly conditioned power — required for sensitive SCADA/security gear in dirty-power environments. Specify double-conversion for NVRs at critical sites.

Typical Deployment Scenarios

8-Camera Single-Site Retrofit

Existing network + 8 outdoor IP cameras. Add a 16-port managed PoE+ switch (Ubiquiti UniFi, Axis T85) on a dedicated VLAN. 1U rack UPS for the NVR + switch. 120-160 watts total PoE budget comfortably runs 8 outdoor cameras with heater + IR.

48-Camera Campus Upgrade

Four buildings, 48 cameras total, existing fiber backbone. Per-building 24-port PoE++ switch with SFP+ fiber uplink to core. Dedicated surveillance VLAN, QoS for video traffic, SNMP monitoring. 2-post relay rack in each IDF closet with dedicated surveillance UPS.

Perimeter Fence Line (1,200ft)

6 bullet cameras + 2 PTZs along perimeter fence, main NVR in building. Fiber media converter + outdoor-rated fiber to a PoE++ switch in a weatherproof enclosure at the fence line. Alternative: NVT Phybridge CHARIoT over existing coax for retrofit applications.

Multi-Floor Office Tower

Stacked IDFs on every floor, cameras + access control + intercom on dedicated VLANs. Cisco Catalyst or Ubiquiti UniFi Pro managed switches per floor with 10G fiber uplink to building core. Per-IDF 3U UPS. Integration with VMS and access control head-end at main BDF.

Frequently Asked Questions

How do I calculate PoE budget for a camera deployment?

Sum the peak wattage of every camera (not nameplate — check spec sheet for "PoE class" or "max consumption"). Add 15-20% headroom for inrush during cold-start. The result is your required simultaneous-peak PoE budget. A 24-port PoE+ switch advertised at 370W can only run about 18 outdoor cameras with heaters + IR — see PoE budget planning.

What's the maximum Ethernet cable run for an IP camera?

100 meters (328 feet) per TIA-568 — total distance from switch port to camera port. That includes in-rack patch cords, in-wall cabling, faceplate jack, and camera jumper. For longer runs, use fiber with a media converter or a long-reach PoE extender. Going past 328ft on copper causes intermittent packet loss that looks like camera problems.

Do I need managed or unmanaged PoE switches?

For more than 8 cameras or any mixed-use network (cameras sharing infrastructure with office traffic), specify managed. VLAN segmentation isolates camera traffic for security and performance; QoS ensures video gets bandwidth priority; SNMP monitoring surfaces failures before users call. Unmanaged switches are acceptable only for small standalone deployments.

What UPS runtime should I plan for an NVR + switch?

15-30 minutes of runtime at actual load is typical — enough to ride through brief outages or allow graceful shutdown before battery exhaustion. For sites with generator transfer, 5-10 minutes is sufficient. Size UPS wattage for actual connected load + 20%, and use the vendor's runtime-at-load curve (runtime is non-linear). Double-conversion UPS for sensitive or dirty-power sites.

How far can I extend PoE past 328 feet?

Ethernet-over-Coax extenders (NVT Phybridge CHARIoT, Altronix eBridge) push Ethernet + PoE to 1,500+ feet over existing RG59/RG6 coax — ideal for analog-to-IP retrofits. UTP-based extenders reach 2,000-4,000 feet on Cat cable at reduced bandwidth (typically 100 Mbps). For new runs over 328ft, fiber + PoE switch at the camera end is usually cleaner architecture.

Should I put cameras on a separate VLAN?

Yes — always. A dedicated camera VLAN isolates camera traffic from office network for security (blocks camera-to-camera lateral movement if one is compromised), performance (cameras don't contend with office bandwidth), and troubleshooting (camera traffic is cleanly separated for packet capture). Requires managed switches; takes 10 minutes to configure on Ubiquiti UniFi, Cisco Catalyst, or any enterprise switch.

Sub categories

Showing Results for Infrastructure

Infrastructure

Plan Your Deployment

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading