Comnet · NW9

Comnet NW9 NetWave Wireless Ethernet Managed Switch

Managed wireless switch with 500m range and 35W PoE for industrial sites

• Gigabit wireless link reaches 500m, eliminating fiber runs at perimeter sites.
• 35W PoE+ budget powers cameras, intercoms, or APs directly from the unit.
• DIN rail and pole mount options with lifetime warranty suit permanent outdoor installs.

Comnet · NWADA1

ComNet NWADA1 11-Port Gigabit Unmanaged DIN Rail Switch

11-port Gigabit switch on DIN rail—plug-and-play, no config

• All 11 ports run at 1 Gbps, supporting simultaneous HD camera and access control traffic.
• Integrated 35mm DIN rail mount installs directly in cabinets—no brackets or extra hardware.
• Unmanaged plug-and-play design eliminates config time; backed by a lifetime warranty.

Comnet · NWAVBSA1

ComNet NWAVBSA1 11-Port Gigabit Industrial Switch

11-port gigabit switch for industrial field networks, unmanaged plug-and-play

• All 11 ports run at 1 Gbps, eliminating bottlenecks across simultaneous device connections.
• Unmanaged plug-and-play operation requires zero configuration, reducing deployment time in the field.
• DIN rail and pole/rack mount options with included hardware support flexible enclosure installs.

Comnet · NWBKT

Comnet NWBKT 11-Port Gigabit Unmanaged DIN Rail Switch

11-port gigabit unmanaged switch for DIN rail security deployments

• All 11 ports run at 1 Gbps full line-rate, eliminating bottlenecks in multi-camera deployments.
• Unmanaged plug-and-play operation requires zero configuration, reducing installation time on every job.
• Standard 35mm DIN rail mount fits directly into control panels and wall-mount cabinets, backed by a lifetime warranty.

Comnet · NWK1

ComNet NWK1 NetWave Wireless Ethernet Bridge

802.11a/n wireless bridge, 500m range, pole-mountable for remote sites

• 95 MBps throughput on 5 GHz 802.11a/n sustains multi-camera video over 500 m links.
• 30 W PoE+ budget powers remote cameras or APs directly, eliminating endpoint power runs.
• Point-to-point and multipoint modes with pole/wall mount suit campus and perimeter installs.

Comnet · NWK1IC

Comnet NWK1IC Point-to-Point Wireless Ethernet Kit

Hardened point-to-point wireless Ethernet bridge designed to span gaps where fiber or copper runs are impractical

Comnet · NWK9

Comnet NWK9 NetWave 11-Port Managed Wireless Ethernet Switch

11-port managed switch with 500m wireless for industrial sites

• 11 gigabit ports with 35W PoE+ budget powers cameras and access control devices.
• 500m wireless range reduces cabling needs across campuses and remote industrial sites.
• DIN rail mount and industrial temp rating simplify deployment in harsh field enclosures.

Comnet · NWK9IC

Comnet NWK9IC 500Mbps Wireless Kit

Point-to-point 802.11ac wireless bridge pair designed to carry full-duplex 500 Mbps throughput between fixed surveillance infrastructure sites where

Comnet · NWKBB100

ComNet NWKBB100 11-Port Gigabit Unmanaged DIN Rail Switch

11-port Gigabit DIN rail switch, plug-and-play unmanaged

• 11 Gigabit ports deliver full line-rate switching for cameras, NVRs, and access control.
• DIN rail mount fits standard 35mm rails for fast cabinet or wall-box installation.
• Unmanaged plug-and-play operation eliminates configuration overhead in fixed topologies.

Comnet · NWKBB200

Comnet NWKBB200 11-Port Gigabit Unmanaged Switch

11-port Gigabit unmanaged switch with DIN rail mount for plug-and-play security networks

• 11 Gigabit ports handle simultaneous IP video, access control, and sensor traffic.
• Unmanaged architecture means zero configuration—power on and connect immediately.
• DIN rail mount fits directly into control cabinets and electrical enclosures.

Comnet · NWKSP3

ComNet NWKSP3 11-Port Gigabit PoE Injector

11-port Gigabit PoE injector, unmanaged, DIN rail mount

• 11 Gigabit ports deliver PoE+ (802.3at) power to cameras, APs, and readers.
• Unmanaged plug-and-play design eliminates configuration overhead at commissioning.
• DIN rail mount with NEMA 4X/IP65 rating suits cabinet and industrial installs.

Comnet · NWKSP4

ComNet NWKSP4 11-Port Gigabit PoE Injector

11-port Gigabit PoE injector, DIN rail mount, unmanaged operation

• All 11 ports deliver PoE+ (802.3at) and Gigabit throughput for high-bandwidth cameras.
• Unmanaged plug-and-play operation eliminates configuration overhead during deployment.
• DIN rail mount fits standard 35mm rails in telecom cabinets with lifetime warranty coverage.

Comnet · NWPM1248GE

Comnet NWPM1248GE 11-Port PoE Injector

11-port unmanaged PoE injector with 328-foot range for distributed power

• 11 Gigabit ports deliver full-speed PoE+ (802.3at) to remote devices up to 328 ft away.
• DIN rail mount fits 35mm rails in cabinets, junction boxes, and outdoor enclosures.
• Industrial temperature rating and lifetime warranty support harsh, non-climate-controlled sites.

Comnet · NWPM2448GE

ComNet NWPM2448GE 11-Port PoE Injector

11-port Gigabit PoE injector for industrial surveillance and access control

• 11 Gigabit ports deliver PoE+ (802.3at) power and data from a single DIN rail unit.
• Industrial storage rating (-40°C to +80°C) ensures reliable operation in harsh enclosures.
• Unmanaged plug-and-play design eliminates firmware and VLAN configuration at commissioning.

Comnet · NWPM24PPI

Comnet NWPM24PPI 11-Port Unmanaged PoE Injector

11-port Gigabit PoE injector, DIN rail mount, zero configuration

• All 11 ports run at 1 Gbps, supporting real-time video streams without bottlenecks.
• DIN rail mount fits standard control cabinets and field enclosures for clean installs.
• Unmanaged plug-and-play design eliminates configuration time across all 11 PoE ports.

Comnet · NWPM4848GE

ComNet NWPM4848GE PoE Injector — 11-Port Gigabit DIN Rail

11-port Gigabit PoE injector with 328ft range, DIN rail mount

• Powers 11 PoE+ (802.3at) endpoints simultaneously, cutting per-drop cabling costs.
• Gigabit throughput at up to 328 ft supports high-bandwidth cameras without repeaters.
• DIN rail mount and industrial temp range suit control cabinets and harsh environments.

Comnet · PIM1

Comnet PIM1 PoE Injector Module

11-port PoE injector module, 330 feet, industrial DIN rail mount

• Delivers PoE 802.3af power to 11 endpoints simultaneously from a single DIN rail module.
• Reaches up to 330 ft, eliminating local power drops in long-run surveillance cable runs.
• Industrial-rated thermal tolerance supports deployment in non-climate-controlled enclosures.

Comnet · CLSETUP

Comnet POE Setup Tool - CLSETUP

Field diagnostic and installation tool built for integrators working with PoE-powered IP surveillance cameras across both traditional CCTV and

Comnet · CNGE1IPS

Comnet PoE+ Injector - CNGE1IPS

30-watt PoE+ midspan injector designed to deliver power and data over a single Ethernet run to remote surveillance cameras, access control equipment

Comnet · NWK1-P5T

Comnet POINT-TO-POINT WIRELESS SWITCH - NWK1-P5T

Compact point-to-point wireless bridge designed for surveillance system integrations where hardwired ethernet isn't feasible or cost-effective

Comnet · VEVPE-S

Comnet Primacy Single-Sided Badge Printer - VEVPE-S

Single-sided thermal transfer badge printer designed for facilities requiring straightforward ID card production at 300dpi resolution

Comnet · PS24AC12DC

ComNet PS24AC12DC 11-Port Unmanaged Media Converter

11-port Gigabit media converter, DIN rail mount, zero config

• 11 Gigabit ports support multi-device deployments without additional switching hardware.
• DIN rail mount fits standard 35 mm rails in control panels, racks, and field enclosures.
• Unmanaged plug-and-play design eliminates configuration overhead; backed by lifetime warranty.

Comnet · MON-SSIQ-SUB-1Y

Comnet RAZBERI MONITOR AND MANAGE SUB - MON-SSIQ-SUB-1Y

1-year subscription service designed to keep your SSIQ platform running reliably with minimal downtime

Comnet · RJ45BK

ComNet RJ45BK Media Converter DIN Rail 2.5G

Industrial copper-to-fiber converter, 2.5G speed, DIN rail mount

• Converts copper RJ45 to fiber at 2.5G, supporting bandwidth-intensive surveillance backbones.
• DIN rail mount integrates directly into industrial enclosures without additional hardware.
• Industrial temperature rating ensures reliable operation in harsh outdoor and edge deployments.

Comnet · RLGE2+1SMSPOEHO

Comnet RLGE2+1SMSPOEHO 3-Port Managed PoE Switch

3-port managed PoE switch for compact edge deployments

• Managed switching with VLAN and QoS support gives integrators granular edge control.
• PoE++ (802.3bt) port powers high-wattage devices without a separate injector.
• Lifetime warranty backs this 3-port, 10/100 Mbps switch in long-term deployments.

Comnet · RLGE3FE7MS4

Comnet RLGE3FE7MS4 3x1000M + 7x100M Managed Switch

10-port hardened managed Layer 2 switch designed for industrial and utility environments where commercial gear fails — substations, railway

Comnet · RLMCSFP48DC

Comnet RLMCSFP48DC 48 VDC Media Converter

DIN-rail or panel-mount media converter rated for electrical substation environments — the right choice when you need to extend surveillance networks

Comnet · RLMCSFPPOEHO

ComNet RLMCSFPPOEHO 11-Port Gigabit DIN Rail Switch

11-port gigabit DIN rail switch for industrial field deployment

• All 11 ports run at 1000 Mbps, supporting high-throughput edge deployments.
• PoE++ (802.3bt) with 60 W budget powers demanding devices from a single switch.
• 35 mm DIN rail mount and industrial-grade rating simplify harsh-environment installs.

Comnet · RMB3

Comnet RMB3 Rack Mount Adapter Kit

Dual-module rack mount adapter kit designed to mount two ComNet ValueLine network switches (models with 8.6-inch/217 mm width dimensions) into a

Comnet · SFP-1

Comnet SFP-1 Single Mode SFP Transceiver Module

Single mode SFP for industrial Gigabit Ethernet fiber networks

• Single mode fiber support enables long-haul runs in industrial Gigabit networks.
• Hot-swappable design allows field replacement without powering down connected equipment.
• TAA and NDAA compliant for federal and defense-sector infrastructure deployments.

Comnet · SFP-10A

Comnet SFP-10A Single Mode SFP Transceiver Module

10G single mode SFP module for industrial fiber networks

• Delivers 10G throughput over single mode fiber for high-bandwidth backbone links.
• Industrial temperature rating supports outdoor cabinets and uncontrolled equipment rooms.
• MSA-compliant SFP form factor enables hot-swap installation in existing SFP-slot switches.

Comnet · SFP-10B

Comnet SFP-10B 10G SFP Transceiver Module

10G single-mode SFP module for Comnet switches and standard ports

• Delivers 10G throughput over single-mode fiber for high-capacity uplink runs.
• Unmanaged operation eliminates configuration overhead on straightforward fiber links.
• Hot-swappable SFP form factor allows field replacement without system downtime.

Comnet · SFP-10G-BX10-D

Comnet SFP-10G-BX10-D Single Mode 10GB LC

Single-mode fiber transceiver module designed for 10Gbps backbone connectivity in surveillance and enterprise networks where distance and bandwidth

Comnet · SFP-10G-BX40-D

Comnet SFP-10G-BX40-D 10Gb 40km SM Fiber LC

Single-mode 10Gbps SFP+ transceiver module designed for long-haul fiber links in surveillance and network infrastructure deployments

Comnet · SFP-10G-BX40-U

Comnet SFP-10G-BX40-U 10Gb 40km LC Fiber

10Gbps singlemode SFP+ transceiver designed for long-distance backbone and regional distribution in industrial surveillance and enterprise networks

Comnet · SFP-10G-LR

Comnet SFP-10G-LR 10G Single Mode SFP Transceiver

10G single-mode SFP+ transceiver for long-distance fiber runs

• Delivers full 10 Gbps throughput over single-mode fiber for backbone segments.
• Reaches up to 10 km over single-mode fiber, eliminating mid-span signal regeneration.
• Industrial temperature rating ensures reliable operation in harsh field deployments.