Infrastructure
Sub categories
Showing Results for Infrastructure
-
Geovision
SKU: 84-GVCOM-2000
Geovision 84-GVCOM-2000 Media Converter
- Converts between network media types, eliminating rewiring in mixed-cabling deployments.
- 12 Mbps data rate sustains reliable surveillance traffic across bridged network segments.
- Compact form factor fits tight rack, cabinet, or wall-mount spaces in retrofit installs.
$50.00 $49.99 Save $0.01 -
Geovision
SKU: 84-POE0100-0010
Geovision 84-POE0100-0010 1-Port PoE Extender
- Extends IEEE 802.3af PoE runs an additional 100m beyond the standard 100m limit.
- Single RJ45 in / RJ45 out topology installs inline with no configuration required.
- Delivers up to 13W to the end device using standard 802.3af switch infrastructure.
$120.00 $85.99 Save $34.01 -
Geovision
SKU: 84-POE1601-001U
Geovision 84-POE1601-001U GV-POE1601 16-Port PoE+ Switch
- 16 PoE+ ports (802.3at) deliver up to 30W each for cameras, readers, and intercoms.
- 250W total power budget supports mid-to-large camera deployments without separate injectors.
- Dual gigabit uplinks (RJ-45 copper or SFP) connect to core switches or NVRs flexibly.
$488.00 $335.99 Save $152.01 -
Geovision
SKU: 84-SD2200S-2012
Geovision 84-SD2200S-2012 Network Switch
- Outdoor-rated enclosure eliminates need for a separate climate-controlled cabinet.
- Delivers 802.3af PoE (up to 13W per port) to power IP PTZ cameras over data cable.
- 60 Hz operation suits IP surveillance deployments requiring stable power distribution.
$2,500.00 $1,487.99 Save $1,012.01 -
Geovision
SKU: 84-SDIREPE-001U
Geovision 84-SDIREPE-001U GV HD-SDI Repeater
- Active signal regeneration eliminates ghosting and attenuation on long coaxial runs.
- Extends HD-SDI transmission beyond 300 ft where passive cabling alone would fail.
- Operates on 12V DC; integrates directly with GV-DVR HD-SDI and GV-Hybrid recorders.
$250.00 $124.99 Save $125.01 -
Geovision
SKU: 85-NAS2008-001U
Geovision 85-NAS2008-001U Linux-Based NAS Accessory
- Linux-based OS delivers stable 24/7 uptime for continuous surveillance recording workloads.
- SMB/CIFS and NFS support integrates over standard Ethernet with Geovision and third-party tools.
- Native Geovision platform support eliminates cross-platform middleware on heterogeneous deployments.
$355.00 $238.99 Save $116.01 -
Geovision
SKU: GV-APOE0811
Geovision GV-APOE0811 8-Port PoE+ Switch
8-port PoE+ gigabit switch for IP cameras and networked security devices
- 8 gigabit PoE+ ports deliver 802.3at power, eliminating separate injectors per device.
- 2 dedicated gigabit uplinks enable clean backbone aggregation and direct NVR integration.
- Managed architecture supports VLAN, QoS, and port mirroring for segmented security networks.
$387.00 $279.99 Save $107.01 -
Geovision
SKU: GV-APOE0811-140
Geovision GV-APOE0811 8-Port PoE+ Switch
8-port PoE+ switch with gigabit uplinks for IP camera deployments
- All 8 ports deliver 802.3at PoE+ power, eliminating separate injectors for PTZ cameras.
- 140W total power budget supports simultaneous operation of multiple high-draw IP devices.
- Two dedicated gigabit uplinks provide clean backhaul separation to NVRs or core switches.
$410.00 $285.99 Save $124.01 -
Geovision
SKU: GV-NAS2008
Geovision GV-NAS2008 Linux-Based NAS
Linux NAS for IP video surveillance with multi-vendor camera support
- ONVIF-compliant; integrates with Axis, Hikvision, Hanwha, Vivotek, and Geovision cameras.
- Linux OS enables SSH and CLI config, fitting into existing infrastructure without proprietary tools.
- Functions as a distributed recording node or VMS offload target for long-term video retention.
$355.00 $237.99 Save $117.01 -
Geovision
SKU: GV-PA903BT
Geovision GV-PA903BT Gigabit PoE Injector
Gigabit PoE injector for IP cameras over existing CAT5e/CAT6
- Delivers 802.3af-compliant 15.4W PoE, powering standard IP cameras without local AC.
- Passes full 1000 Mbps Gigabit throughput, supporting high-bandwidth multi-camera streams.
- Plug-and-play with zero configuration required; works over existing CAT5e/CAT6 runs.
$165.00 $123.99 Save $41.01 -
Geovision
SKU: 84-POE0400-001U
Geovision GV-POE0400 4 Port POE Switch - 84-POE0400-001U
- Delivers 802.3at PoE+ across 4 ports to power cameras up to 17W each.
- 70W shared power budget supports small surveillance zones on a single switch.
- Plug-and-play with any ONVIF-compliant camera over standard Cat5e or Cat6.
$158.00 $101.99 Save $56.01 -
Geovision
SKU: GV-POE0811
Geovision GV-POE0811 8-Port Managed PoE+ Switch
8-port gigabit managed switch with PoE+ power on all ports
- All 8 gigabit ports deliver simultaneous PoE+ (802.3at) up to 30W each.
- Managed VLAN and per-port QoS isolate surveillance traffic on shared networks.
- 1000 Mbps per-port throughput sustains multiple concurrent 4K camera streams.
$331.00 $208.99 Save $122.01 -
GRI
SKU: 2600
GRI 2600 Water Sensor with Relay
Passive water sensor with relay for 12V/24V alarm systems, no power needed
- Water sensor with built-in N.O. relay - no intermediate switching
- Conductive moisture probe distinguishes water from humidity
- 12V/24V alarm system compatible for direct panel zone wiring
$44.00 $28.99 Save $15.01 -
GRI
SKU: 4561
GRI 4561 Tilt Sensor
Miniature tilt sensor detects 13.3mm displacement for tamper detection
- Compact 2.0 x 0.75 inch tilt sensor for covert equipment monitoring
- Detects panel, cabinet, or display rotation away from secured position
- 25A switching capacity, 5VA max for direct alarm zone wiring
$18.99 -
GRI
SKU: 4561R
GRI 4561R Tilt Sensor with Relay
Tilt sensor with relay output for door and window monitoring
- Tilt sensor with integrated N.O./N.C. relay output to panel
- Switches clean contact closure - no software parsing needed
- 5VA max switching capacity for direct alarm zone integration
$25.99 -
GRI
SKU: DPARM
GRI DPARM Closed Loop Pool Access Alarm
Closed-loop pool perimeter alarm with integrated access control
- Closed-loop pool access alarm with continuous circuit monitoring
- Detects tampering or line cuts immediately - no silent failures
- 9V battery operation - drop-in for residential pool perimeter
$163.99
Infrastructure
Infrastructure components provide the network and power backbone that supports reliable surveillance and access control systems. Select switches, PoE devices, power supplies, and transmission hardware designed for commercial environments.
Plan Your Deployment
- Total PoE power budget and port density requirements
- Switch throughput and uplink capacity planning
- Redundancy and failover design considerations
- Distance limitations and fiber conversion needs
- Power conditioning and voltage compatibility

























