DMP

DMP · 369/4

DMP 369/4 7.0 Ah 12 VDC Lead-Acid Battery

12V sealed lead-acid battery for access control backup power

• 7.0 Ah at 12 VDC sustains door controllers and readers for hours during AC loss.
• Sealed lead-acid chemistry requires zero maintenance inside panels or enclosures.
• Fits standard cabinet installs at 12.5" W × 9.5" H × 3.75" D with no voltage conversion.

DMP · 366/2

DMP 366/2 18.0 Ah VDC Lead-Acid Battery

18.0 Ah lead-acid battery backup for security and access control systems

• 18.0 Ah / 12VDC sealed lead-acid chemistry sustains panel ops during AC loss.
• Sold as a two-unit package, enabling redundant battery banks in XT/XR panels.
• Fits DMP XT and XR Series directly; installs with standard terminals and wrench.

DMP · 350B

DMP 350B Slide-In Bracket

Slide-in bracket for DMP control panel enclosure mounting

• Mounts auxiliary modules in DMP 350 and 350A enclosures without drilling or rework.
• Standard 3-hole mounting pattern ensures consistent, repeatable positioning every install.
• Supports relay cards and expansion boards, keeping modular upgrades mechanically aligned.

DMP · 341B

DMP 341B Battery Bracket with 318T Battery Harness

Battery bracket with pre-terminated 318T harness for DMP control panels

• Pre-terminated 318T harness plugs directly into DMP panel, eliminating field wiring.
• Rigid bracket prevents battery movement and connector fatigue inside the enclosure.
• Fits standard control panel housings; no adapter plates or modifications required.

DMP · 335

DMP 335 Interior Siren — 12VDC Alarm Audible

12VDC interior siren for intrusion alarm panel integration

• Runs on 12VDC panel output, eliminating separate high-voltage infrastructure.
• 15W dual-tone audible output delivers clear occupant alert on intrusion trigger.
• Compact 4"×4"×1" white ABS housing mounts to walls or ceilings in interior spaces.

DMP · 327

DMP 327 50 VA Plug-In Transformer

50 VA plug-in transformer for TCP/IP security systems

• Delivers 16.5 VAC at 50 VA to power readers, strikes, and door-control circuits.
• Plugs directly into a wall outlet — no enclosure, rack mount, or distribution cabinet needed.
• Specified for DMP XR150, XR550, and XT75 panels; verify compatibility before ordering.

DMP · 324P

DMP 324P 100 VA Wire-In Transformer

100 VA step-down transformer for hardwired cabinet security systems

• 100 VA capacity supports simultaneous card readers, mag-locks, and controllers on one supply.
• Wire-in hardwired mount eliminates loose outlet connections for cleaner cabinets and audit compliance.
• TCP/IP protocol support integrates directly into networked access control architectures.

DMP · 321

DMP 321 40 VA Plug-In Transformer

40 VA plug-in transformer for networked access control systems

• Delivers 16.5 VAC at 40 VA to power XT30 and XT50 series control panels directly.
• Screw-mount bracket secures to a standard outlet box—no power cabinet or DIN rail needed.
• Rated for storage down to -40 °C, supporting installs in unheated or harsh environments.

DMP · 3012

DMP 3012 Tamper Switch

Hardwired tamper switch with TCP/IP alarm for cabinet & equipment protection

• Hardwired TCP/IP signaling delivers real-time tamper alerts directly to compatible DMP panels.
• Recessed mount design integrates cleanly into cabinet doors and equipment enclosure housings.
• Supervised wired connection eliminates battery dependency and wireless blind spots in detection.

DMP · X1-POE

DMP X1-POE PoE Module

PoE module for DMP X1 access control over single Ethernet cable

• 802.3af PoE delivers power and data over one CAT5e/6 run—no door-side PSU needed.
• 10Base-T/100Base-TX support keeps legacy copper and modern switch plants compatible.
• Exclusive X1 series integration simplifies single-door controller deployment at scale.

DMP · X1-8

DMP X1-8 Multi-Door Access Controller

Wired multi-door controller with OSDP and keypad reader support

• OSDP communication ensures standardized, secure reader-to-controller dialogue.
• Single controller manages credential-based access across multiple door points.
• PoE 802.3af support simplifies wired deployment by eliminating separate power runs.

DMP · V-6022WC

DMP V-6022WC Cube Camera

• Compact 3.0" x 1.7" x 4.9" cube body mounts on shelves or desktops without ceiling work.
• Fixed lens design cuts installation time and eliminates focus-drift service calls.
• Indoor-rated housing suits climate-controlled retail, office, and residential deployments.

DMP · V-5052D

DMP V-5052D Fixed Dome Camera

• Fixed lens eliminates FOV drift, reducing service calls and maintaining consistent coverage.
• Vandal-resistant dome housing suits interior and covered exterior commercial deployments.
• Integrates with DMP security and video management platforms for unified system control.

DMP · V-5014B

DMP V-5014B Bullet Camera

• Integrates natively with DMP control panels, eliminating third-party VMS bridging work.
• Bullet housing rated for outdoor perimeter use in exposed exterior installations.
• Supports Video Alarm Verification workflows to cut false dispatch costs on DMP sites.

DMP · V-5012B

DMP V-5012B Bullet Camera

• Bullet form factor suits wall or soffit mounting at entryways and loading docks.
• PoE-ready design eliminates separate power runs and consolidates distribution at the switch.
• Integrates with DMP Video Architect VMS and standards-based third-party recording platforms.

DMP · STB-10

DMP STB-10 3/8" Recessed Contact

3/8" recessed contact for concealed door and window monitoring

• 3/8" recessed body fits tight door and window frame cavities for flush, hidden install.
• Closed-loop wiring integrates directly with DMP panels and standard intrusion alarm systems.
• Miniature form factor eliminates surface-mount housing, keeping hardware invisible post-install.

DMP · SR3

DMP SR3 Bluetooth Wireless Access Control Reader

Wireless 125kHz proximity reader with encrypted Bluetooth, no cables

• Bluetooth wireless link eliminates cable runs, cutting retrofit installation labor.
• Reads standard 125kHz proximity cards and fobs, compatible with existing credential stock.
• Encrypted wireless transmission protects credentials against eavesdropping and cloning.

DMP · SM-20WG

DMP SM-20WG 3" Wide Gap Magnetic Reed Contact

3" wide gap magnetic reed contact for networked door monitoring

• 3-inch operating gap handles reinforced steel frames and non-standard door geometries.
• TCP/IP connectivity enables remote event logging across distributed perimeter door networks.
• Supports up to 500 NFC/13.56MHz credentials for multi-zone access control deployments.

DMP · PSM-2P

DMP PSM-2P ISO Imageable Proximity Card

ISO imageable proximity card for 125 kHz access control systems

• 125 kHz RF integrates with existing proximity readers—no additional hardware required.
• ISO-standard dimensions support direct photo printing, consolidating badge and photo ID in one card.
• PVC construction withstands daily handling without delamination or RF performance loss.

DMP · PSK-3

DMP PSK-3 Proximity Key Ring Tag

125 kHz proximity key ring tag for DMP & third-party readers

• 125 kHz passive operation eliminates battery management across large credential deployments.
• 26-bit Wiegand encoding ensures compatibility with DMP readers and standard third-party panels.
• Compact 1.2"×1.5"×0.15" key ring form factor keeps credentials on-person, reducing re-enrollment.