Vertiv GXT5-1500LVRT2UXL vs Vertiv EDGE-1500IRT2UXL: Specification Comparison
Both the Vertiv GXT5-1500LVRT2UXL and the Vertiv EDGE-1500IRT2UXL are 1500VA / 1350W rack/tower convertible UPS units in a 2U form factor, making them direct cross-shop candidates for IT closets, edge deployments, and small data center racks. The GXT5-1500LVRT2UXL belongs to the Liebert GXT5 series and targets 120V North American installations, while the EDGE-1500IRT2UXL is a 230V unit designed for international or European markets. This comparison evaluates topology, power protection quality, connectivity, and compliance to help installers and IT buyers choose correctly for their environment.
In This Guide
- Which UPS topology delivers stronger power protection for critical loads?
- How do input voltage range, output configuration, and operating environment compare?
- Which unit offers more management options, certifications, and serviceability features?
- Which should you choose: the GXT5-1500LVRT2UXL or the EDGE-1500IRT2UXL?
- Side-by-Side Specs
- FAQ
Which UPS topology delivers stronger power protection for critical loads?
The GXT5-1500LVRT2UXL uses Online Double Conversion topology, meaning incoming AC is continuously rectified to DC and then re-inverted to clean AC. This provides a true zero-millisecond transfer time to battery — the output never passes raw utility power to the load, eliminating all sags, surges, frequency drift, and waveform distortion upstream of the connected equipment.
The EDGE-1500IRT2UXL uses Line-Interactive topology, where utility power is conditioned through an autotransformer under normal conditions and the inverter engages only on power failure. The spec sheet lists a pure sine waveform output but does not specify a transfer time to battery, meaning a brief switchover delay is inherent to line-interactive design.
For servers, storage arrays, or any load intolerant of even a sub-cycle dropout, the double-conversion topology of the GXT5-1500LVRT2UXL provides a categorically higher level of protection. The EDGE-1500IRT2UXL is appropriate for loads that can tolerate the transition gap typical of line-interactive units.
How do input voltage range, output configuration, and operating environment compare?
The GXT5-1500LVRT2UXL is rated for 120VAC input with an operating range of 60–150V and delivers 110/115/120/125VAC output (user-configurable, ±3%). Its outlets are 6 × NEMA 5-15R, suited exclusively to North American 120V infrastructure. The unit operates from 32–104°F (0–40°C); operating altitude is not specified in the provided data.
The EDGE-1500IRT2UXL accepts up to 278V input and outputs 200–240V AC via 6 × IEC C13 outlets. It operates from 0–40°C and up to 3,000 m altitude — the altitude ceiling is a confirmed spec for the EDGE; no equivalent altitude figure is provided for the GXT5-1500LVRT2UXL. The EDGE's international voltage range makes it incompatible with standard North American 120V circuits.
These two units are voltage-incompatible: the GXT5-1500LVRT2UXL is a 120V North American product; the EDGE-1500IRT2UXL is a 230V international product. Buyers must select based on their facility's supply voltage. Neither unit can substitute for the other in its native environment.
Which unit offers more management options, certifications, and serviceability features?
The GXT5-1500LVRT2UXL provides USB and Serial (DB9) communication ports, plus an optional Intellislot network card slot for SNMP/network management card expansion. It supports programmable outlet groups, an Emergency Power Off (EPO) port, and an input circuit breaker. Batteries are hot-swappable and user-replaceable without a service call. The unit carries TAA compliance and Energy Star 2.0 certification.
The EDGE-1500IRT2UXL includes a USB port and an LCD display. RoHS compliance and EN60020-1:2008+A1:2013 safety certification are listed. No network management card slot, EPO port, programmable outlet groups, or hot-swap battery capability is specified in the provided data for the EDGE.
The GXT5-1500LVRT2UXL offers a substantially richer management and serviceability feature set: optional network card expansion, EPO, programmable outlets, and hot-swap batteries are all confirmed specs. The EDGE-1500IRT2UXL's management options are limited to USB and LCD per the provided specifications; any additional capabilities are not documented in the supplied data.
Which should you choose: the GXT5-1500LVRT2UXL or the EDGE-1500IRT2UXL?
Our take: The GXT5-1500LVRT2UXL is the stronger choice when the deployment is on a 120V North American circuit and demands the highest level of power protection, serviceability, and management flexibility. Its Online Double Conversion topology delivers a confirmed zero-millisecond transfer time versus the inherent switchover delay of the EDGE-1500IRT2UXL's Line-Interactive design. The GXT5 supports optional Intellislot network card expansion, EPO, and programmable outlet groups — none of which are specified for the EDGE. Hot-swap user-replaceable batteries on the GXT5 also reduce maintenance downtime, a feature absent from the EDGE's provided spec data. Conversely, the EDGE-1500IRT2UXL is the only viable option for 230V international or European installations, and its confirmed 3,000 m operating altitude suits edge or high-elevation sites. Buyers should select the GXT5-1500LVRT2UXL for protected North American server rooms and the EDGE-1500IRT2UXL exclusively where 230V supply voltage is present.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Vertiv GXT5-1500LVRT2UXL | Vertiv EDGE-1500IRT2UXL |
|---|---|---|
| UPS Topology | Online Double Conversion | Line-Interactive |
| Capacity (VA) | 1500 VA | 1500 VA |
| Capacity (Watts) | 1350 W | 1350 W |
| Form Factor | Rack/Tower Convertible, 2U | Rack/Tower Convertible, 2U |
| Input Voltage | 120VAC (60–150V range) | Up to 278V |
| Output Voltage | 110/115/120/125VAC ±3% (configurable) | 200–240VAC |
| Output Waveform | Pure Sinewave | Pure Sine |
| Transfer Time | Zero (continuous online) | Not specified |
| Output Outlets | 6 × NEMA 5-15R | 6 × IEC C13 |
| Connectivity | USB, Serial DB9, optional Intellislot NIC | USB |
| Display | Not specified | LCD |
| Hot-Swap Batteries | Yes | Not specified |
| Programmable Outlet Groups | Yes | Not specified |
| EPO Support | Yes | Not specified |
| Operating Temperature | 0–40°C (32–104°F) | 0–40°C |
| Operating Altitude | Not specified | 0–3,000 m |
| Efficiency | Up to 98% (ECO mode) | Not specified |
| Compliance | TAA Compliant, Energy Star 2.0 | RoHS, EN60020-1:2008+A1:2013 |
| Warranty | 3-Year Advanced Replacement | Not specified |
Frequently Asked Questions
Which should you choose: the GXT5-1500LVRT2UXL or the EDGE-1500IRT2UXL?
The GXT5-1500LVRT2UXL is the stronger choice when the deployment is on a 120V North American circuit and demands the highest level of power protection, serviceability, and management flexibility. Its Online Double Conversion topology delivers a confirmed zero-millisecond transfer time versus the inherent switchover delay of the EDGE-1500IRT2UXL's Line-Interactive design. The GXT5 supports optional Intellislot network card expansion, EPO, and programmable outlet groups — none of which are specified for the EDGE. Hot-swap user-replaceable batteries on the GXT5 also reduce maintenance downtime, a feature absent from the EDGE's provided spec data. Conversely, the EDGE-1500IRT2UXL is the only viable option for 230V international or European installations, and its confirmed 3,000 m operating altitude suits edge or high-elevation sites. Buyers should select the GXT5-1500LVRT2UXL for protected North American server rooms and the EDGE-1500IRT2UXL exclusively where 230V supply voltage is present.
Can I use the EDGE-1500IRT2UXL in the United States on a standard wall outlet?
No. The EDGE-1500IRT2UXL is rated for 230V international voltage with IEC C13 output outlets. Standard US circuits are 120V NEMA, which is incompatible. The GXT5-1500LVRT2UXL is the correct choice for North American 120V installations.
Does the GXT5-1500LVRT2UXL protect against power sags and surges without switching to battery?
Yes. Its Online Double Conversion topology continuously re-conditions power through its rectifier and inverter, so the connected load never sees raw utility power. Sags, surges, and waveform distortion are filtered in real time with zero transfer time, unlike the line-interactive EDGE-1500IRT2UXL, which switches to inverter only on an outage.
Which unit is easier to maintain in a live rack environment?
The GXT5-1500LVRT2UXL specifies hot-swappable, user-replaceable battery modules, meaning batteries can be changed without powering down connected equipment. The EDGE-1500IRT2UXL's provided specifications do not indicate hot-swap battery capability, so maintenance requirements for the EDGE cannot be confirmed from the available data.
More UPS Comparisons
- APC by Schneider Electric SMX1500RMI2U vs CyberPower PRL1500RT2UC
- APC by Schneider Electric SMX1500RMI2U vs CyberPower BRG1500AVRLCD2
- APC by Schneider Electric SMX1500RMI2U vs CyberPower PR1500LCD
- APC by Schneider Electric SMX1500RMI2U vs APC by Schneider Electric BR1500MS2
- APC by Schneider Electric SMX1500RMI2U vs APC by Schneider Electric SMTL1500RM3UCUS
- CyberPower PRL1500RT2UC vs APC by Schneider Electric BR1500MS2
UPS Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.