Vertiv Edge 1500VA/1350W 230V UPS - EDGE-1500IRT2UXL

Vertiv EDGE-1500IRT2UXL 1500VA Line-Interactive Rackmount/Tower UPS

Overview

The Vertiv EDGE-1500IRT2UXL is a 1500VA/1350W line-interactive UPS designed for rack-mounted network equipment, surveillance NVRs, edge computing nodes, and small server deployments where clean, uninterrupted power is non-negotiable. Its pure sine wave output means sensitive electronics — particularly switching power supplies found in access control panels, IP cameras, and NVRs — receive utility-grade waveform quality whether running on mains or battery, eliminating the compatibility issues that modified sine wave units cause with certain loads. Deployable as a 2U rackmount or freestanding tower, the EDGE-1500IRT2UXL fits equally well in a server room rack or a wiring closet shelf.

Key Features

• 1350W Pure Sine Wave Output: At 1350W true power capacity, this unit handles real-world mixed loads — a typical surveillance NVR drawing 80W, a PoE switch at 150W, and several edge devices — with headroom to spare. Pure sine wave output protects active PFC power supplies (standard in modern servers and network hardware) from the harmonic distortion that cheaper UPS units inject.
• Line-Interactive Topology: The AVR (Automatic Voltage Regulation) stage corrects over- and under-voltage conditions between 200V and 278V input without switching to battery — extending battery life significantly in environments with fluctuating utility power, such as light industrial facilities or older commercial buildings with unreliable grid quality.
• Six IEC C13 Outlets: All six outputs use the standard IEC C13 coupler, the universal connector for rack-mounted IT gear worldwide. No adapter juggling for servers, switches, or patch panels — plug straight in.
• USB Port for Graceful Shutdown: The onboard USB port connects to a server or workstation for automated, graceful OS shutdown during extended outages — preventing data corruption and filesystem errors that an abrupt power cut would cause.
• LCD Status Display: The front-panel LCD gives at-a-glance readings of input voltage, output load percentage, battery charge level, and runtime estimate — critical during an event so you can triage which loads to shed without guessing.
• Flexible 2U Rackmount or Tower Form Factor: Ships in a 2U profile that installs in a standard 19-inch rack, and converts to a tower footprint for wiring closets or floor-standing deployments — one SKU covers both scenarios.
• Wide Input Voltage Window (up to 278V): Accepts input up to 278V before clamping, accommodating the high-end voltage swings common on European 230V circuits or older commercial infrastructure without nuisance trips to battery.
• Operating Temperature 0–40°C: Rated for the full range of conditioned server rooms down to closets that see some thermal variation — 40°C upper limit means a warm wiring closet in summer won't push it out of spec.
• Altitude Rated to 3000m: For deployments in mountainous regions or high-elevation facilities, the 3000m altitude rating ensures the unit performs to spec where thinner air reduces cooling efficiency in lesser equipment.
• RoHS Compliant: Meets RoHS environmental standards, a procurement requirement for many government and enterprise purchasing frameworks.

Integration & Compatibility

The EDGE-1500IRT2UXL outputs at 200–240V across its six C13 outlets, covering the full European/international 230V equipment range. The USB management port integrates with standard UPS management software on Windows and Linux for automated shutdown scripting — useful when the UPS protects an unattended edge node or remote surveillance server. The unit carries EN60020-1:2008+A1:2013 safety certification and RoHS compliance, satisfying the procurement and safety documentation requirements typical of UPS and power protection purchases in commercial and light-industrial security installations. For sites deploying network video recorders or edge computing hardware, pairing this UPS with appropriately rated PoE switches ensures the entire surveillance infrastructure stays protected during grid events. Consult the Vertiv power protection line for higher-capacity models if your load budget exceeds 1350W.

Frequently Asked Questions

Q: What is the true watt capacity of the EDGE-1500IRT2UXL, and how does that translate to real loads?

A: The EDGE-1500IRT2UXL delivers 1350W of real power output. A typical surveillance stack — one NVR (80W), one 24-port PoE switch (150W), and several edge devices — leaves substantial headroom. Size your load to no more than 80% of rated watts (roughly 1080W) for reliable runtime and battery longevity.

Q: Does the EDGE-1500IRT2UXL produce a pure sine wave or modified sine wave output?

A: Pure sine wave — both on mains and on battery. This matters for any load with an active PFC power supply (modern servers, NVRs, and many network switches), which can malfunction or fail prematurely on the stepped approximation a modified sine wave UPS produces.

Q: What outlet types does the EDGE-1500IRT2UXL provide?

A: Six IEC C13 outlets — the standard kettle-lead connector used by virtually all rack-mounted IT and AV equipment. No adapters required for servers, switches, or patch panels built for the international 230V market.

Q: Can the EDGE-1500IRT2UXL be installed in a standard 19-inch rack?

A: Yes. It occupies 2U in a standard 19-inch rack. It also converts to a tower orientation for floor-standing or shelf deployment — the same unit supports both configurations.

Q: What input voltage range does the EDGE-1500IRT2UXL tolerate before switching to battery?

A: The line-interactive AVR stage corrects voltage fluctuations without switching to battery across a wide window, accepting input up to 278V and regulating output down to 200V minimum. This reduces unnecessary battery cycling in facilities with variable grid quality.

Q: Is the EDGE-1500IRT2UXL suitable for outdoor or uncontrolled-temperature environments?

A: No — it is rated for 0–40°C operating temperature, which covers conditioned server rooms and most wiring closets. It is not designed for outdoor, unheated, or high-humidity environments without additional enclosure protection.

Jerry Tildsen

The spec I keep coming back to on the EDGE-1500IRT2UXL is the pure sine wave output at 1350W — not because it sounds impressive, but because the alternative causes real problems in the field. I've seen modified sine wave UPS units trip active PFC power supplies in NVRs and cause random reboots that get misdiagnosed as software issues for weeks. This unit eliminates that failure mode entirely, and at the 1350W capacity point, it covers a well-loaded surveillance rack without pushing load percentages into the danger zone.

Technical Highlights:

• Pure Sine Wave at 1350W: Delivers utility-grade waveform on battery — active PFC power supplies in NVRs, switches, and servers won't see the harmonic distortion that causes nuisance shutdowns or PSU damage over time.
• AVR Input Window to 278V: The line-interactive stage handles input swings from under-voltage to 278V without touching battery — in commercial buildings with aging electrical infrastructure, this meaningfully extends battery service life.
• Six C13 Outlets, 2U Footprint: Six universal IEC C13 outputs in a 2U rack profile covers a standard surveillance or network equipment stack without requiring a larger chassis or additional PDU for basic outlet count.

Deployment Considerations:

• The 230V output range (200–240V) is calibrated for international markets — confirm your local equipment accepts this voltage band before deploying; North American 120V loads are not supported by this model.
• Operating altitude is rated to 3000m, but the 0–40°C temperature window is the binding constraint in warm wiring closets — ensure adequate airflow around the unit, as thermal de-rating at the ceiling will shorten battery life.

This unit is well-matched to a compact edge surveillance deployment: a 16- or 32-channel NVR, a managed PoE switch, and two or three ancillary devices in a half-rack or small server closet where a 2U profile is a real constraint and pure sine wave output is required for hardware compatibility.