Panduit U10N11V vs APC by Schneider Electric SRT10KRMXLT-5KTF2: Specification Comparison
Both the Panduit U10N11V and the APC SRT10KRMXLT-5KTF2 are 10 kVA double-conversion online UPS units designed for rack-mount deployment in data center, edge, and enterprise environments. Each delivers pure sine wave output and targets IT infrastructure protection at the same power tier. This comparison examines the three most decision-relevant dimensions for this product class: power capacity and output characteristics, physical integration and installation requirements, and management and monitoring capabilities — drawing exclusively from published specifications for each unit.
In This Guide
- How do the output power capacity, voltage range, and waveform quality compare between the U10N11V and SRT10KRMXLT-5KTF2?
- What are the physical form factor, rack space requirements, and installation method differences between the two units?
- Which unit offers stronger remote management, monitoring, and network integration capabilities?
- Which should you choose: the U10N11V or the SRT10KRMXLT-5KTF2?
- Side-by-Side Specs
- FAQ
How do the output power capacity, voltage range, and waveform quality compare between the U10N11V and SRT10KRMXLT-5KTF2?
The APC SRT10KRMXLT-5KTF2 carries explicit published output power figures: 10,000 VA and 10,000 W, indicating a unity power factor (1.0). Output voltage is specified across a range of 120 V to 208 V, accommodating both standard North American single-phase loads and higher-voltage equipment, with the included dual 208 V-to-120 V 5 kVA step-down transformers bundled in the SKU. Output frequency is 50/60 Hz, and output voltage THD is rated at 2%, with a crest factor of 3:1 and surge energy rating of 480 J. Emergency Power Off (EPO) is confirmed supported.
The Panduit U10N11V specifies a 10 kVA rating and pure sine wave output but does not publish a watt figure, power factor, output voltage range, THD percentage, crest factor, surge joule rating, or EPO support status in the provided specifications. Buyers requiring precise load-matching calculations or validation against downstream equipment specs will find the APC's published data more immediately actionable.
What are the physical form factor, rack space requirements, and installation method differences between the two units?
The Panduit U10N11V is specified at 10.3 inches (262 mm) high and 17.3 inches (440 mm) wide, with a rack height approximated at 6U and compatibility with both 2-post and 4-post 19-inch EIA racks. Input connection is via hardwire terminals, which suits permanent data center installations but requires licensed electrician involvement and is not a plug-and-play deployment. Battery modules are hot-swappable, supporting in-service replacement without downtime.
The APC SRT10KRMXLT-5KTF2 does not disclose rack unit height, overall dimensions, or input connection type in the provided specifications. The SKU designation 'RMXLT' is consistent with APC's extended-runtime rack-mount line, but no dimensional data can be cited from the provided spec set. The inclusion of two 5 kVA step-down transformers in a 2U form factor (per the product name) adds rack space consumption beyond the base UPS chassis — exact total U-count is not specified in the provided data.
Which unit offers stronger remote management, monitoring, and network integration capabilities?
The Panduit U10N11V includes a network management card slot described as SNMP-ready, with the network adapter sold separately. This is a common enterprise architecture that allows buyers to select their preferred NMC generation or vendor-compatible card, but it means out-of-box remote visibility requires an additional purchase. No further management protocol details, software platforms, or cloud connectivity claims appear in the provided specifications.
The APC SRT10KRMXLT-5KTF2 confirms web-based management support and audible alarms in its published specifications. APC's SRT platform is broadly known for NMC slot compatibility and EcoStruxure integration, but no additional management protocols, software names, or NMC inclusion details can be cited from the specification set provided. Both units thus require buyers to verify NMC inclusion or separate purchase status before assuming out-of-box remote monitoring.
Which should you choose: the U10N11V or the SRT10KRMXLT-5KTF2?
Our take: The SRT10KRMXLT-5KTF2 is the stronger choice when buyers need fully documented output parameters and a voltage-flexible deployment. APC publishes an explicit 10,000 W output with 2% THD and a 3:1 crest factor — numbers the Panduit U10N11V does not disclose in its provided spec set — enabling precise load calculations before commissioning. The APC also confirms EPO support and a 480 J surge rating, both absent from Panduit's published data. Conversely, the U10N11V's hardwire terminal input and verified 2-post/4-post 19-inch EIA rack compatibility make it the better-documented choice for permanent data center rack infrastructure where dimensional fit and installation method are the gating decisions. Buyers standardizing on Panduit physical infrastructure or requiring confirmed hot-swap battery replacement without published APC dimensional data should evaluate the U10N11V on-site. Buyers prioritizing verified electrical performance figures and bundled step-down transformer flexibility should favor the APC.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Panduit U10N11V | APC by Schneider Electric SRT10KRMXLT-5KTF2 |
|---|---|---|
| UPS Topology | Double-Conversion Online | Double-Conversion Online |
| Rated Capacity (VA) | 10,000 VA | 10,000 VA |
| Rated Output Power (W) | — | 10,000 W |
| Output Power Factor | — | 1.0 (derived: 10kW / 10kVA) |
| Output Waveform | Pure Sine Wave | Sine Wave |
| Output Voltage THD | — | 2% |
| Crest Factor | — | 3:1 |
| Surge Energy Rating | — | 480 J |
| Input Connection | Hardwire Terminals | — |
| Input Voltage Range | — | 100 V – 275 V |
| Output Voltage Range | — | 120 V – 208 V |
| Output Frequency | — | 50/60 Hz |
| Emergency Power Off (EPO) | — | Yes |
| Battery Type | Hot-Swappable Modules | — |
| Rack Form Factor | 6U (approx), 19" EIA 2-post/4-post | Rack-Mount (U-count not specified) |
| Network Management | Card Slot (adapter sold separately) | Web-based management confirmed |
Frequently Asked Questions
Which should you choose: the U10N11V or the SRT10KRMXLT-5KTF2?
The SRT10KRMXLT-5KTF2 is the stronger choice when buyers need fully documented output parameters and a voltage-flexible deployment. APC publishes an explicit 10,000 W output with 2% THD and a 3:1 crest factor — numbers the Panduit U10N11V does not disclose in its provided spec set — enabling precise load calculations before commissioning. The APC also confirms EPO support and a 480 J surge rating, both absent from Panduit's published data. Conversely, the U10N11V's hardwire terminal input and verified 2-post/4-post 19-inch EIA rack compatibility make it the better-documented choice for permanent data center rack infrastructure where dimensional fit and installation method are the gating decisions. Buyers standardizing on Panduit physical infrastructure or requiring confirmed hot-swap battery replacement without published APC dimensional data should evaluate the U10N11V on-site. Buyers prioritizing verified electrical performance figures and bundled step-down transformer flexibility should favor the APC.
Is the U10N11V or SRT10KRMXLT-5KTF2 better for mixed 120 V and 208 V load environments?
Based on published specifications, the SRT10KRMXLT-5KTF2 has a documented advantage here. Its output voltage range is specified at 120 V to 208 V, and the SKU includes two 208 V-to-120 V 5 kVA step-down transformers, explicitly supporting mixed-voltage rack environments. The Panduit U10N11V does not disclose output voltage range or transformer compatibility in the provided specifications, so its suitability for mixed-voltage loads cannot be confirmed from spec data alone.
Which unit is easier to service in a live rack — can batteries be swapped without taking the UPS offline?
The Panduit U10N11V explicitly specifies hot-swappable battery modules, meaning battery replacement can be performed without powering down the connected load. The APC SRT10KRMXLT-5KTF2 does not include a hot-swap battery statement in the provided specification set. Buyers for whom in-service battery replacement is a firm requirement should confirm APC's battery swap procedure through APC documentation before purchase.
Do either of these UPS units include a network management card out of the box, or is one required as an add-on?
Neither unit confirms a network management card is included in the base SKU based on the provided specifications. The Panduit U10N11V describes a network card slot with the adapter sold separately. The APC SRT10KRMXLT-5KTF2 confirms web-based management capability but does not specify whether an NMC is included or sold separately in the provided data. Buyers should verify NMC inclusion with their distributor before assuming out-of-box remote monitoring for either model.
More UPS Comparisons
- APC by Schneider Electric SRTL10KRM4UT-5KTF2 vs Panduit U10N32V
- APC by Schneider Electric SRTL10KRM4UT-5KTF2 vs Panduit U10N11V
- APC by Schneider Electric SRTL10KRM4UT-5KTF2 vs Panduit U10N12V
- APC by Schneider Electric SRTL10KRM4UT-5KTF2 vs Vertiv GXT5-10KHVRT5UXLN
- APC by Schneider Electric SRTL10KRM4UT-5KTF2 vs APC by Schneider Electric E3SUPS10KFBS
- APC by Schneider Electric SRTL10KRM4UT-5KTF2 vs APC by Schneider Electric SRT10KRMXLT-10KTF
UPS Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.