Panduit U06N11V vs APC by Schneider Electric SYH6K6RMI: Specification Comparison
Both the Panduit SteadySine U06N11V and the APC Symmetra RM SYH6K6RMI are rack-mountable, 6 kVA uninterruptible power supplies designed for data center and enterprise environments. Buyers evaluating either unit are likely sourcing protected power for server racks, network infrastructure, or edge compute nodes where power continuity, runtime, and manageability are critical. This comparison evaluates each product across the three dimensions that most directly drive purchasing decisions in this class: power output and runtime, physical form factor and environmental envelope, and connectivity and management capabilities.
In This Guide
- What protected power capacity and runtime does each unit actually deliver?
- How do the two units compare in physical footprint and operating environment tolerance?
- What output connections, input wiring, and remote management options does each unit support?
- Which should you choose: the U06N11V or the SYH6K6RMI?
- Side-by-Side Specs
- FAQ
What protected power capacity and runtime does each unit actually deliver?
The APC SYH6K6RMI carries a published output power capacity of 6 kVA with an active power rating of 4,200 W, giving it a power factor of 0.70. Runtime figures are documented at 12.7 minutes at full load and 30.3 minutes at half load, backed by a maintenance-free sealed lead-acid battery with suspended electrolyte. The replacement battery cartridge is identified as the APC SYBT2.
The Panduit U06N11V is rated at 6 kVA at the system level, consistent with its SteadySine sub-brand positioning for Data Center, Edge, and Enterprise MTDC applications. However, the available specifications do not include an active power (watt) rating, power factor, runtime at full or half load, or battery type and replacement part number. Buyers requiring a direct watt-for-watt and minute-for-minute runtime comparison cannot make that assessment from the published Panduit spec set alone.
How do the two units compare in physical footprint and operating environment tolerance?
The Panduit U06N11V occupies 3U of rack space and measures 262 mm H × 440 mm W (10.3 in × 17.3 in). Depth and weight are not provided in the available specification set. The unit ships as a single package (Package Qty: 1).
The APC SYH6K6RMI dimensions are published as 482.6 mm W × 730.3 mm D × 355.6 mm H — indicating a significantly deeper chassis and a height equivalent to approximately 8U, substantially taller than the Panduit's 3U form. The APC unit carries a documented operating temperature range of 0–40 °C and storage range of −15 to 45 °C, with operating relative humidity of 0–95% (non-condensing implied) and storage humidity of 0–95%. No equivalent environmental ratings are provided for the Panduit U06N11V in the available specifications.
For space-constrained rack deployments, the Panduit's 3U profile offers a meaningfully smaller footprint, assuming depth compatibility. The APC unit's 730.3 mm depth must be verified against rack depth before procurement.
What output connections, input wiring, and remote management options does each unit support?
The APC SYH6K6RMI provides ten output connections: eight IEC 320 C13 outlets and two IEC 320 C19 outlets, accommodating both standard server power supplies and higher-draw devices. Input connection is hard-wired (3-wire), typical for higher-capacity rack UPS units. The unit includes an Emergency Power Off (EPO) function. For remote management, it offers a DB-9 RS-232 serial port and an RJ-45 10Base-T Ethernet interface supporting web, SNMP, and Telnet management protocols — enabling integration into existing DCIM or NMS platforms without an additional management card.
The Panduit U06N11V specification set does not enumerate outlet count, outlet types, input connection type, EPO availability, or any management interface (serial, Ethernet, SNMP). The datasheet is referenced at /content/product-datasheets/U06N11V.pdf and should be consulted for these details before making a final connectivity or integration assessment. Panduit's SteadySine positioning for enterprise MTDC environments implies management capability is likely present, but no spec data is available to confirm or quantify it here.
Which should you choose: the U06N11V or the SYH6K6RMI?
Our take: The SYH6K6RMI is the stronger choice when a buyer requires documented runtime, outlet count, and native network management in a single verified spec sheet. APC publishes 4,200 W active output (versus unspecified for the Panduit), 12.7 minutes at full load and 30.3 minutes at half load, ten IEC outlets (8×C13 + 2×C19), and onboard RJ-45 Ethernet with SNMP/web/Telnet management — all confirmed from the provided specifications. The Panduit U06N11V's primary documented advantage is its 3U rack height versus the APC's approximately 8U chassis (355.6 mm H), which is a decisive factor in density-constrained deployments. However, because active wattage, runtime, outlet configuration, and management interfaces are absent from the Panduit spec set provided, buyers cannot confirm parity on the most critical UPS selection criteria without consulting the Panduit datasheet directly before purchase.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Panduit U06N11V | APC by Schneider Electric SYH6K6RMI |
|---|---|---|
| Product Class | Rack-mount UPS | Rack-mount UPS |
| Sub-brand / Series | SteadySine™ | Symmetra RM |
| Rated Capacity (kVA) | 6 kVA | 6 kVA |
| Active Power Output (W) | — | 4,200 W |
| Power Factor | — | 0.70 |
| Runtime at Full Load | — | 12.7 min |
| Runtime at Half Load | — | 30.3 min |
| Rack Height (U / mm) | 3U / 262 mm | ~8U / 355.6 mm |
| Width (mm) | 440 mm | 482.6 mm |
| Depth (mm) | — | 730.3 mm |
| Output Outlets | — | (8) IEC 320 C13 + (2) IEC 320 C19 |
| Input Connection | — | Hard Wire 3-wire |
| Emergency Power Off (EPO) | — | Yes |
| Management Interface | — | DB-9 RS-232 + RJ-45 10Base-T (SNMP/Web/Telnet) |
| Battery Type | — | Maintenance-free sealed Lead-Acid (suspended electrolyte) |
| Replacement Battery | — | APC SYBT2 |
| Operating Temperature | — | 0–40 °C |
| Operating Humidity | — | 0–95% |
| Target Application | Data Center, Edge, Enterprise MTDC | — |
| Package Qty | 1 | — |
Frequently Asked Questions
Which should you choose: the U06N11V or the SYH6K6RMI?
The SYH6K6RMI is the stronger choice when a buyer requires documented runtime, outlet count, and native network management in a single verified spec sheet. APC publishes 4,200 W active output (versus unspecified for the Panduit), 12.7 minutes at full load and 30.3 minutes at half load, ten IEC outlets (8×C13 + 2×C19), and onboard RJ-45 Ethernet with SNMP/web/Telnet management — all confirmed from the provided specifications. The Panduit U06N11V's primary documented advantage is its 3U rack height versus the APC's approximately 8U chassis (355.6 mm H), which is a decisive factor in density-constrained deployments. However, because active wattage, runtime, outlet configuration, and management interfaces are absent from the Panduit spec set provided, buyers cannot confirm parity on the most critical UPS selection criteria without consulting the Panduit datasheet directly before purchase.
Which unit is better suited for a high-density rack with limited U space?
Based on available specifications, the Panduit U06N11V is rated at 3U (262 mm H), while the APC SYH6K6RMI measures 355.6 mm H — approximately 8U. If rack unit economy is a primary constraint, the Panduit U06N11V has a substantially smaller vertical footprint, provided its depth fits the target rack. Panduit's rack depth is not published in the available spec set and should be confirmed before ordering.
Does either unit include built-in network management without an add-on card?
The APC SYH6K6RMI includes a documented RJ-45 10Base-T Ethernet port supporting web, SNMP, and Telnet management, plus a DB-9 RS-232 interface, all specified in the provided data. No management interface is listed in the available Panduit U06N11V specifications; buyers should review the Panduit datasheet at /content/product-datasheets/U06N11V.pdf to determine management options before selecting this unit for a remotely monitored environment.
What is the backup runtime difference between the two units?
Runtime data is only available for the APC SYH6K6RMI: 12.7 minutes at full load (6 kVA / 4,200 W) and 30.3 minutes at half load. The Panduit U06N11V does not include runtime figures in the provided specification set. A direct runtime comparison between the two units cannot be made from the data available; consult the Panduit U06N11V datasheet for battery and runtime specifications.
More UPS Comparisons
- APC by Schneider Electric SYH6K6RMT vs CyberPower OL6KRTHW
- APC by Schneider Electric SYH6K6RMT vs CyberPower OL6KRTHD
- APC by Schneider Electric SYH6K6RMT vs Vertiv GXT5-6000MVRT4UXLN
- APC by Schneider Electric SYH6K6RMT vs Vertiv GXT5-6KL630RT5UXLN
- APC by Schneider Electric SYH6K6RMT vs APC by Schneider Electric SYH6K6RMI
- APC by Schneider Electric SYH6K6RMT vs APC by Schneider Electric SYH6K6RMT-TF3
UPS Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.