NETGEAR GS348PP-100NAS vs Ubiquiti USW-PRO-MAX-48-POE: Specification Comparison
Both the NETGEAR GS348PP-100NAS and the Ubiquiti USW-PRO-MAX-48-POE are 48-port PoE switches intended for infrastructure deployments where powered devices—IP cameras, access points, VoIP phones—must be connected at scale. The NETGEAR is an unmanaged Gigabit PoE+ switch with a 380W budget, while the Ubiquiti is a fully managed, multi-speed PoE++ switch with a 720W budget, 1,000-VLAN support, and 10G SFP+ uplinks. This comparison evaluates PoE capacity and port speed, switching performance and build quality, and management capability.
In This Guide
- Which switch delivers more PoE power and port-speed flexibility?
- How do the two switches compare on throughput, enclosure, and operating environment?
- Which switch offers greater management depth, VLAN support, and compliance credentials?
- Which should you choose: the GS348PP-100NAS or the USW-PRO-MAX-48-POE?
- Side-by-Side Specs
- FAQ
Which switch delivers more PoE power and port-speed flexibility?
The USW-PRO-MAX-48-POE provides a 720W PoE++ (802.3bt) simultaneous power budget across all 48 ports, compared to the GS348PP-100NAS's 380W PoE+ (802.3at) budget. Both products support PoE++ (802.3bt) per their spec listings, but only the Ubiquiti's datasheet explicitly states simultaneous 720W delivery across all ports; the NETGEAR spec lists 380W as its budget against a PoE+ (802.3at) designation in one field and PoE++ (802.3bt) in another—buyers should verify the per-port standard against the published datasheet before specifying high-wattage 802.3bt devices.
On port speed, the GS348PP-100NAS delivers 1 Gbps on all 48 RJ-45 ports and no uplink speed beyond 1G is stated in the provided specs. The USW-PRO-MAX-48-POE offers 48 × 1G RJ-45 ports plus 8 × 2.5G ports and 2 × 10G SFP+ uplinks, enabling high-speed aggregation to a core switch or NVR. For deployments where uplink bandwidth is a bottleneck—dense camera sites or mixed-use networks—the Ubiquiti's multi-speed architecture provides headroom not available on the NETGEAR.
How do the two switches compare on throughput, enclosure, and operating environment?
The USW-PRO-MAX-48-POE is specified at 224 Gbps switching capacity and 112 Gbps non-blocking throughput at 167 Mpps forwarding rate. No switching capacity, non-blocking throughput, or forwarding rate figure is provided in the GS348PP-100NAS specs; buyers requiring a verified throughput number for network design cannot confirm performance from the supplied data.
Enclosure material differs: the USW-PRO-MAX-48-POE uses SGCC steel in a 1U rack-mount form factor (442.4 × 400 × 44 mm, 6.2 kg). The GS348PP-100NAS is specified with a plastic housing and wall/ceiling mount options, indicating a non-rack, non-data-center form factor. The Ubiquiti carries a rated operating range of -5°C to 40°C; the NETGEAR spec lists 'Industrial' for operating temperature but provides no numeric range, so a direct thermal comparison cannot be made from the supplied data.
Which switch offers greater management depth, VLAN support, and compliance credentials?
The GS348PP-100NAS is explicitly specified as an unmanaged switch. It provides no VLAN support, no remote management interface, and no software integration capability per the supplied specs. Configuration is zero-touch: connect cables and the switch operates immediately, which eliminates setup complexity but also eliminates any network segmentation or monitoring capability.
The USW-PRO-MAX-48-POE is a fully managed switch supporting up to 1,000 VLANs and managed via Ethernet (UniFi controller ecosystem per the product line, though no controller software is named in the provided specs). It holds NDAA compliance and certifications including CE, FCC, IC, and Anatel (06373-24-08356). No NDAA compliance status or third-party certifications are listed for the GS348PP-100NAS. For federal, government, or enterprise deployments requiring NDAA compliance or network segmentation, the Ubiquiti meets documented requirements that the NETGEAR does not address in the provided specifications.
Which should you choose: the GS348PP-100NAS or the USW-PRO-MAX-48-POE?
Our take: The USW-PRO-MAX-48-POE is the stronger choice when the deployment requires managed networking, higher PoE power density, multi-speed uplinks, or NDAA compliance. Its 720W PoE budget is 340W greater than the NETGEAR's 380W, its 2 × 10G SFP+ uplinks and 224 Gbps switching capacity provide infrastructure headroom the NETGEAR's 1G-only, unmanaged design cannot match, and its NDAA compliance with CE/FCC/IC/Anatel certifications is documented where the GS348PP-100NAS provides none. The GS348PP-100NAS is the appropriate choice for small, standalone installations where zero configuration, plastic enclosure suitability, and wall or ceiling mounting are genuine requirements and where network segmentation, remote management, and high-density PoE power are not needed. The NETGEAR targets simple plug-and-play camera drops; the Ubiquiti targets enterprise or government infrastructure requiring verified compliance and full Layer 2 management.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | NETGEAR GS348PP-100NAS | Ubiquiti USW-PRO-MAX-48-POE |
|---|---|---|
| Product Type | Unmanaged Switch | Managed Switch |
| Total RJ-45 Ports | 48 × 1G | 48 × 1G |
| Additional Uplink Ports | — | 8 × 2.5G + 2 × 10G SFP+ |
| PoE Standard | PoE+ (802.3at) / PoE++ (802.3bt) listed | PoE++ (802.3bt) |
| PoE Power Budget | 380W | 720W simultaneous |
| Switching Capacity | — | 224 Gbps |
| Non-Blocking Throughput | — | 112 Gbps |
| Forwarding Rate | — | 167 Mpps |
| VLAN Support | None (unmanaged) | Up to 1,000 VLANs |
| Form Factor | Wall / Ceiling Mount | 1U Rack Mount |
| Enclosure Material | Plastic | SGCC Steel |
| Operating Temperature | Listed as Industrial (no numeric range provided) | -5°C to 40°C (23 to 104°F) |
| Power Supply | — | Internal 870W AC (100–240V) |
| Base Power Consumption | — | 100W (excluding PoE output) |
| NDAA Compliant | — | Yes |
| Warranty | 5 years | Manufacturer Warranty (duration not specified) |
Frequently Asked Questions
Which should you choose: the GS348PP-100NAS or the USW-PRO-MAX-48-POE?
The USW-PRO-MAX-48-POE is the stronger choice when the deployment requires managed networking, higher PoE power density, multi-speed uplinks, or NDAA compliance. Its 720W PoE budget is 340W greater than the NETGEAR's 380W, its 2 × 10G SFP+ uplinks and 224 Gbps switching capacity provide infrastructure headroom the NETGEAR's 1G-only, unmanaged design cannot match, and its NDAA compliance with CE/FCC/IC/Anatel certifications is documented where the GS348PP-100NAS provides none. The GS348PP-100NAS is the appropriate choice for small, standalone installations where zero configuration, plastic enclosure suitability, and wall or ceiling mounting are genuine requirements and where network segmentation, remote management, and high-density PoE power are not needed. The NETGEAR targets simple plug-and-play camera drops; the Ubiquiti targets enterprise or government infrastructure requiring verified compliance and full Layer 2 management.
Is the GS348PP-100NAS or USW-PRO-MAX-48-POE better for larger deployments with many high-wattage cameras?
The USW-PRO-MAX-48-POE is better suited. Its 720W simultaneous PoE++ budget is 340W greater than the GS348PP-100NAS's 380W, allowing more high-wattage 802.3bt devices to run concurrently without power throttling. It also supports 1,000 VLANs for traffic segmentation across those devices.
Can the GS348PP-100NAS be used in a rack-mount installation?
Based on the provided specs, the GS348PP-100NAS is specified for wall and ceiling mounting with a plastic enclosure. No rack-mount form factor or rack ears are listed. The USW-PRO-MAX-48-POE is specified as a 1U rack-mount unit (442.4 × 400 × 44 mm).
Which switch is required for NDAA-compliant federal or government installations?
The USW-PRO-MAX-48-POE is listed as NDAA-compliant in the provided specs and holds CE, FCC, IC, and Anatel certifications. No NDAA compliance status or equivalent certifications are listed for the GS348PP-100NAS, so the Ubiquiti is the only option of these two for deployments where NDAA compliance is a contract requirement.
More Network Switch Comparisons
- NETGEAR GS748PP-100NAS vs Ubiquiti USW-48-POE
- NETGEAR GS748PP-100NAS vs Ubiquiti USW-PRO-MAX-48-POE
- NETGEAR GS748PP-100NAS vs Ubiquiti USW-ENTERPRISE-48-POE
- NETGEAR GS748PP-100NAS vs Ubiquiti ES-48-500W
- NETGEAR GS748PP-100NAS vs NETGEAR GS348PP-100NAS
- Ubiquiti USW-48-POE vs NETGEAR GS348PP-100NAS
Network Switch Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.