Hanwha GS980M/52PS-10 vs NETGEAR GS748PP-100NAS: Specification Comparison
Both the Hanwha HV-GS980M/52PS-10 and the NETGEAR GS748PP-100NAS are 48-port, rack-mount Gigabit Ethernet PoE switches aimed at IP surveillance and enterprise edge deployments. The comparison centers on total PoE power budget, management capability, and environmental hardening — three dimensions that directly determine fitness for outdoor traffic and security installations versus standard indoor IT closets. Neither unit is a camera or recorder; both serve as the network backbone powering and forwarding traffic from PoE-connected devices.
In This Guide
- Which switch delivers more total PoE power across all 48 ports?
- How do these switches differ in management capability and environmental hardening?
- Which switch is better integrated into a physical-security ecosystem?
- Which should you choose: the GS980M/52PS-10 or the GS748PP-100NAS?
- Side-by-Side Specs
- FAQ
Which switch delivers more total PoE power across all 48 ports?
The Hanwha HV-GS980M/52PS-10 specifies a total PoE power budget of 740 W across its 48 ports, supporting PoE++ (802.3bt) on each port. This budget is critical for high-density deployments running multi-sensor cameras, PTZ units, or devices requiring Class 5 or Class 6 802.3bt draw. The 4 additional SFP uplink ports are specified as fiber-capable, contributing no PoE load.
The NETGEAR GS748PP-100NAS specifies a per-port PoE budget of 30 W and a total system power budget of 30 W — as stated in the provided specs. If that figure represents the aggregate rather than per-port, it would be atypically low for a 48-port unit; the spec as supplied states '30W per port' and '30W' as total wattage. Buyers should confirm the aggregate PoE budget with NETGEAR documentation, as the supplied spec appears internally inconsistent. Based solely on the provided data, the Hanwha's 740 W aggregate is unambiguously higher.
How do these switches differ in management capability and environmental hardening?
The Hanwha HV-GS980M/52PS-10 is specified as a Layer 2/3 managed switch with GUI-based management, VLAN, QoS, and port mirroring. It carries an IP66 ingress-protection rating, an IK10 impact rating, and NEMA 4X / NEMA-TS 2 certifications, with an operating temperature range of -40 °C to +55 °C (-40 °F to +131 °F). These ratings make it suitable for outdoor traffic cabinets, roadside enclosures, and other harsh environments. The unit also ships with a pre-installed WAVE Server and 1 Pro License bundled.
The NETGEAR GS748PP-100NAS is specified as an unmanaged switch — plug-and-play with no configuration interface. No IP, IK, or NEMA environmental ratings are provided in the supplied specs. The storage/operating temperature listed in the spec data is -20 °C to +70 °C, though the label reads 'Storage' rather than 'Operating'; buyers should verify the operating temperature range with NETGEAR. No VMS software is bundled. Its non-blocking 96 Gbps switching fabric is explicitly stated.
Which switch is better integrated into a physical-security ecosystem?
The Hanwha HV-GS980M/52PS-10 is positioned explicitly within the Hanwha Vision surveillance ecosystem. The bundled WAVE Server with 1 Pro License means the switch ships with VMS capability included, reducing separate software procurement for Hanwha camera deployments. Layer 2/3 management enables network segmentation (VLAN) and traffic prioritization (QoS) essential for isolating surveillance traffic from general IT traffic — a common requirement in enterprise physical-security installations. The Telnet/RFC 1091 terminal-type interface is noted in the specs, indicating CLI access alongside GUI.
The NETGEAR GS748PP-100NAS is vendor-neutral by virtue of being unmanaged; it will forward traffic from any PoE device regardless of manufacturer. The spec notes compatibility with 'enterprise' environments and a non-blocking 96 Gbps fabric, which handles full line-rate on all 48 ports simultaneously. However, the absence of VLAN, QoS, or any management plane means security network segmentation must be handled upstream. No VMS, software license, or surveillance-specific feature is bundled or specified.
Which should you choose: the GS980M/52PS-10 or the GS748PP-100NAS?
Our take: The HV-GS980M/52PS-10 is the stronger choice when deploying a managed, outdoor-hardened PoE switch in a Hanwha Vision surveillance environment. Its 740 W total PoE budget dwarfs the NETGEAR's specified 30 W aggregate figure, it carries IP66, IK10, NEMA 4X, and NEMA-TS 2 ratings absent entirely from the GS748PP-100NAS, and it adds Layer 2/3 management with VLAN and QoS versus the NETGEAR's unmanaged operation. The bundled WAVE Server and 1 Pro License further reduce total deployment cost for Hanwha camera installations. The GS748PP-100NAS suits budget-conscious, indoor, vendor-neutral deployments where zero-configuration simplicity is valued and traffic segmentation can be offloaded upstream — but buyers must independently verify its aggregate PoE budget before specifying it for high-density camera rows, as the supplied spec data is internally inconsistent on that figure.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha GS980M/52PS-10 | NETGEAR GS748PP-100NAS |
|---|---|---|
| Port Count (PoE) | 48 | 48 |
| Uplink Ports | 4 x SFP (fiber) | — |
| PoE Standard | PoE++ (802.3bt) | PoE++ (802.3bt) |
| Total PoE Budget | 740 W | 30 W (spec inconsistent — verify) |
| Max Per-Port PoE | — | 30 W |
| Switching Fabric / Throughput | — | 96 Gbps non-blocking |
| Management | Layer 2/3 managed (GUI, CLI) | Unmanaged |
| VLAN / QoS | Yes (VLAN, QoS, port mirroring) | — |
| IP Rating | IP66 | — |
| IK Rating | IK10 | — |
| NEMA Rating | NEMA 4X, NEMA-TS 2 | — |
| Operating Temperature | -40 °C to +55 °C | — |
| Form Factor | Rack mount | Rack mount / Desktop |
| Bundled Software | WAVE Server + 1 Pro License | — |
| Warranty | 5 years | — |
| Housing Color | White | — |
Frequently Asked Questions
Which should you choose: the GS980M/52PS-10 or the GS748PP-100NAS?
The HV-GS980M/52PS-10 is the stronger choice when deploying a managed, outdoor-hardened PoE switch in a Hanwha Vision surveillance environment. Its 740 W total PoE budget dwarfs the NETGEAR's specified 30 W aggregate figure, it carries IP66, IK10, NEMA 4X, and NEMA-TS 2 ratings absent entirely from the GS748PP-100NAS, and it adds Layer 2/3 management with VLAN and QoS versus the NETGEAR's unmanaged operation. The bundled WAVE Server and 1 Pro License further reduce total deployment cost for Hanwha camera installations. The GS748PP-100NAS suits budget-conscious, indoor, vendor-neutral deployments where zero-configuration simplicity is valued and traffic segmentation can be offloaded upstream — but buyers must independently verify its aggregate PoE budget before specifying it for high-density camera rows, as the supplied spec data is internally inconsistent on that figure.
Is the HV-GS980M/52PS-10 or GS748PP-100NAS better for large outdoor camera deployments?
The HV-GS980M/52PS-10 is the clear fit for outdoor installations. It is rated IP66, IK10, NEMA 4X, and NEMA-TS 2, and operates from -40 °C to +55 °C — all specs absent from the GS748PP-100NAS. For indoor, climate-controlled closets the NETGEAR's simpler profile may suffice, but no environmental hardening is specified for it.
Can I power high-wattage 802.3bt cameras on both switches?
Both switches specify PoE++ (802.3bt) support. The Hanwha provides a stated 740 W total budget across 48 ports. The NETGEAR's supplied specs state 30 W per port but also list 30 W as the total wattage, which is internally inconsistent; buyers should confirm the true aggregate budget with NETGEAR before planning high-density 802.3bt deployments on that unit.
Do I need separate VMS software if I buy the HV-GS980M/52PS-10?
No — the HV-GS980M/52PS-10 is specified as shipping with a pre-installed WAVE Server and 1 Pro License. The GS748PP-100NAS includes no VMS software or license; VMS must be procured separately for any recording function.
More Network Switch Comparisons
- NETGEAR GS748PP-100NAS vs Ubiquiti USW-48-POE
- NETGEAR GS748PP-100NAS vs Ubiquiti USW-PRO-MAX-48-POE
- NETGEAR GS748PP-100NAS vs Ubiquiti USW-ENTERPRISE-48-POE
- NETGEAR GS748PP-100NAS vs Ubiquiti ES-48-500W
- NETGEAR GS748PP-100NAS vs NETGEAR GS348PP-100NAS
- Ubiquiti USW-48-POE vs NETGEAR GS348PP-100NAS
Network Switch Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.