CyberPower PR1000LCD vs APC by Schneider Electric SMT1000J: Specification Comparison
Both the CyberPower PR1000LCD and the APC SMT1000J are 1000VA line-interactive UPS units targeting small-to-medium IT infrastructure, network closets, and workstation protection in the 120V/100V single-phase space. The comparison spans real power capacity, runtime and battery characteristics, surge protection, outlet configuration, expansion and management options, and warranty coverage — the dimensions that drive purchasing decisions for installers and IT buyers evaluating a UPS at this capacity tier.
In This Guide
Which UPS delivers more usable power and runtime under load?
The PR1000LCD is rated at 1000VA / 1000W, yielding a unity power factor (1.0). The SMT1000J is rated 1000VA / 670W, reflecting a 0.67 power factor. At full rated wattage, the CyberPower unit can sustain 1000W of connected load, while the APC unit's maximum real power output is 670W — a 33% reduction in usable watts despite identical VA ratings.
CyberPower specifies runtime at 3.1 minutes at 1000W full load and 10.5 minutes at 500W (50% load). APC does not publish runtime curves in the provided SMT1000J spec sheet, so a direct minute-for-minute comparison at equivalent wattage loads cannot be made from available data. Buyers requiring documented runtime guarantees should note this gap.
Battery capacity is specified for the PR1000LCD as 2 x 12V/12Ah sealed lead-acid, user-replaceable, with a 3-hour quick charge / 8-hour eco-mode recharge time. The SMT1000J lists a 4-hour recharge time; battery Ah capacity is not specified in the provided data.
How do surge protection, outlet count, and management connectivity compare?
Surge energy rating is 1,030 joules for the PR1000LCD versus 459 joules for the SMT1000J — more than twice the rated joule absorption on the CyberPower unit. Both provide 8 x NEMA 5-15R output receptacles. The PR1000LCD designates 4 outlets as critical-load priority; the SMT1000J spec does not differentiate outlet groups in the provided data.
Input voltage operating range differs: the PR1000LCD accepts 78–149 VAC at 120V nominal, while the SMT1000J accepts 80–123 VAC standard range (adjustable to 70–125 VAC) at 100V nominal. The SMT1000J is explicitly localized for Japan (100V input); the PR1000LCD is a 120V North American unit. This is a critical compatibility factor — these units are not interchangeable across markets.
For management, the PR1000LCD provides USB, serial, and SNMP connectivity plus an included removable LCD on a 4.5 ft cable, bundled with PowerPanel Business Edition software. The SMT1000J provides USB only as the remote management interface, plus one SmartSlot expansion bay for optional SNMP or other management cards (card not included). The SMT1000J includes an audible alarm rated at 45 dBA; the PR1000LCD does not specify an audible alarm dB level in the provided data.
What are the differences in certifications, warranty, and physical deployment?
The PR1000LCD carries UL1778, cUL 107.3, FCC DOC Class A, Energy Star, and RoHS certifications. The SMT1000J is certified to UL 1449, VCCI Class A ITE, RoHS Exemption 7b, and REACH. UL1778 (UPS standard) vs UL1449 (surge protection standard) reflect different primary certification scopes; buyers in regulated environments should verify which standard their procurement or AHJ requires.
Warranty coverage is 3 years for the PR1000LCD with a $375,000 Connected Equipment Guarantee. The SMT1000J carries a 2-year limited warranty; a connected equipment guarantee value is not stated in the provided spec data.
The PR1000LCD is a mini-tower form factor at 6.7 x 8.7 x 17 in, weighing 44 lbs. The SMT1000J shipping dimensions are provided (12.9 x 23.4 x 14.8 in) but unit dimensions are listed only as 6.8 in for one axis — full unit dimensions are not fully specified in the provided data. The SMT1000J weighs 50.2 lbs, approximately 6 lbs heavier than the PR1000LCD.
Which should you choose: the PR1000LCD or the SMT1000J?
Our take: The PR1000LCD is the stronger choice for North American 120V deployments where maximum real power output, surge absorption headroom, and management depth are priorities. At 1000W real power versus the SMT1000J's 670W, the CyberPower unit delivers 330W more usable capacity at identical VA — a decisive delta for high-power-factor loads such as servers or PoE switches. Its 1,030-joule surge rating is more than double the SMT1000J's 459 joules, and it includes SNMP connectivity and PowerPanel Business Edition software out of the box, where the APC unit requires an additional SmartSlot card for equivalent network management. The PR1000LCD also carries a 3-year warranty with a $375,000 equipment guarantee versus the SMT1000J's 2-year warranty with no stated guarantee value. The SMT1000J is a 100V Japan-market unit and is not a compatible substitute for North American infrastructure; it warrants consideration only for Japanese market deployments where its VCCI and 100V ratings are required.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | CyberPower PR1000LCD | APC by Schneider Electric SMT1000J |
|---|---|---|
| Capacity (VA) | 1000 VA | 1000 VA |
| Capacity (Watts) | 1000 W | 670 W |
| Power Factor | 1.0 | 0.67 |
| Topology | Line Interactive with AVR | Line Interactive |
| Output Waveform | Pure Sine Wave | Sine Wave |
| Input Voltage (Nominal) | 120 VAC | 100 VAC |
| Input Voltage Range | 78–149 VAC | 80–123 VAC (adj. 70–125 VAC) |
| Output Receptacles | 8 x NEMA 5-15R (4 critical priority) | 8 x NEMA 5-15R |
| Surge Energy Rating | 1,030 joules | 459 joules |
| Runtime @ 50% Load | 10.5 min @ 500W | — |
| Battery | 2 x 12V/12Ah SLA, user replaceable | Lead acid; Ah not specified |
| Recharge Time | 3 hr (quick) / 8 hr (eco) | 4 hours |
| Management Interfaces | USB, Serial, SNMP | USB; SmartSlot (card sold separately) |
| Display | Removable LCD, 4.5 ft cable | LCD display |
| Warranty | 3 years; $375,000 equipment guarantee | 2 years; no guarantee value stated |
| Certifications | UL1778, cUL 107.3, FCC DOC Class A, Energy Star, RoHS | UL 1449, VCCI Class A ITE, RoHS Exemption 7b, REACH |
| Weight | 44 lbs | 50.2 lbs |
| Market / Localization | North America (120V) | Japan (100V) |
Frequently Asked Questions
Which should you choose: the PR1000LCD or the SMT1000J?
The PR1000LCD is the stronger choice for North American 120V deployments where maximum real power output, surge absorption headroom, and management depth are priorities. At 1000W real power versus the SMT1000J's 670W, the CyberPower unit delivers 330W more usable capacity at identical VA — a decisive delta for high-power-factor loads such as servers or PoE switches. Its 1,030-joule surge rating is more than double the SMT1000J's 459 joules, and it includes SNMP connectivity and PowerPanel Business Edition software out of the box, where the APC unit requires an additional SmartSlot card for equivalent network management. The PR1000LCD also carries a 3-year warranty with a $375,000 equipment guarantee versus the SMT1000J's 2-year warranty with no stated guarantee value. The SMT1000J is a 100V Japan-market unit and is not a compatible substitute for North American infrastructure; it warrants consideration only for Japanese market deployments where its VCCI and 100V ratings are required.
Can I use the APC SMT1000J in a North American 120V installation instead of the PR1000LCD?
No. The SMT1000J is explicitly localized for Japan with a 100V nominal input voltage and VCCI Class A ITE certification. It is not rated or certified for 120V North American use. The PR1000LCD is the appropriate unit for North American deployments.
Which UPS supports network SNMP monitoring without buying extra hardware?
The PR1000LCD includes USB, serial, and SNMP connectivity plus PowerPanel Business Edition software in the box. The SMT1000J provides USB management only as specified; SNMP capability requires purchasing and installing a separate SmartSlot network management card, which is not included.
How do the warranties and connected equipment guarantees compare between these two units?
The PR1000LCD carries a 3-year limited warranty and a $375,000 Connected Equipment Guarantee as stated in its specifications. The SMT1000J carries a 2-year limited warranty; the provided spec data does not state a connected equipment guarantee value for the SMT1000J.
More UPS Comparisons
- CyberPower PR1000RTXL2UC vs APC by Schneider Electric SURT1000RMXLI
- CyberPower PR1000RTXL2UC vs APC by Schneider Electric SMT1000CUS
- CyberPower PR1000RTXL2UC vs Vertiv GXT5-1000LVRT2UXL
- CyberPower PR1000RTXL2UC vs APC by Schneider Electric SMT1000J
- CyberPower PR1000RTXL2UC vs CyberPower CP1000PFCLCD
- CyberPower PR1000RTXL2UC vs CyberPower PR1000LCD
UPS Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.