Axis T8504-E vs Axis D8004: Specification Comparison
Both the Axis T8504-E and Axis D8004 are 4-port PoE gigabit switches designed to power IP cameras and similar surveillance edge devices. The T8504-E (SKU 01449-001) is a managed, outdoor-rated unit with an SFP fiber uplink and asymmetric PoE+ budgeting, while the D8004 (SKU 02101-004) is an unmanaged, indoor-rated unit intended for simple plug-and-play deployments. Buyers cross-shopping these two are typically deciding between a hardened field-deployment switch and a clean, low-complexity indoor closet or camera-mount switch—both within the same 4-port PoE switch class.
In This Guide
- How do the switching capacity, PoE power budget, and port capabilities compare?
- Which switch is built for harsher deployment environments, and what does each offer in terms of physical protection and power resilience?
- What management, security, and integration capabilities does each switch provide?
- Which should you choose: the T8504-E or the D8004?
- Side-by-Side Specs
- FAQ
How do the switching capacity, PoE power budget, and port capabilities compare?
The T8504-E delivers a 10 Gbps switching capacity at 7.44 Mpps and provides an SFP fiber uplink in addition to its 4× RJ45 PoE+ ports. Its PoE+ output is asymmetric: ports 1–2 supply up to 60W each, ports 3–4 supply up to 30W each, for a specified total PoE budget of 150W. This makes it capable of powering two high-draw PTZ or multi-sensor cameras simultaneously on ports 1–2. Pin assignment extends to 1/2, 3/6, 4/5, 7/8 on ports 1–2 (four-pair) and 1/2, 3/6 on ports 3–4 (two-pair).
The D8004 offers 4× RJ45 PoE ports plus one additional RJ45 uplink port, all at 10/100BASE-TX speeds—not gigabit on the PoE ports themselves, per the connector spec listing '10BASE-T/100BASE-TX PoE'. Its maximum PoE output is 60W total across all four ports (IEEE 802.3af/at), with a maximum system power draw of 62.4W. No SFP uplink is present, no switching capacity figure in Gbps or Mpps is specified, and MAC table or jumbo frame data are not provided in the supplied specs.
For bandwidth-intensive deployments—multiple HD or 4K streams, uplink aggregation, or fiber backhaul—the T8504-E's 10 Gbps fabric and SFP uplink offer substantially more headroom. The D8004's 60W total budget limits simultaneous high-power device support; the T8504-E's 150W budget allows far greater flexibility in mixed-device environments.
Which switch is built for harsher deployment environments, and what does each offer in terms of physical protection and power resilience?
The T8504-E is rated for outdoor use with an aluminum casing and a NEMA 250 Type 4X rating. Its operating temperature range spans -40°C to 60°C (per the spec field) or -40°C to 50°C (per the datasheet-sourced tilde field)—note this discrepancy exists in the provided spec data and should be confirmed against the official datasheet. All network ports and AC lines include 6kV surge protection. Storage conditions extend to 85°C. The unit is PVC-free and weighs 2.9 kg (6.39 lbs). Input is 100–240V AC, 50/60 Hz.
The D8004 is rated for indoor use only, with a metal casing and no stated IP or NEMA rating. Its operating temperature is 0°C to 50°C, and storage is -10°C to 50°C at 5–95% RH non-condensing. No surge protection rating is provided in the supplied specs. The unit weighs 172 g (0.38 lb) and measures 90 × 80 × 21 mm—markedly more compact. Input is also 100–240V AC, 50–60 Hz at a maximum of 62W.
For any outdoor, industrial, or harsh-climate installation, the T8504-E is the specified choice: it carries a defined surge protection rating, a wide sub-zero temperature floor, and an outdoor NEMA enclosure. The D8004's 0°C lower limit and indoor-only rating make it unsuitable for uncontrolled environments. Where space is constrained and conditions are controlled, the D8004's compact 172 g form factor is an installation advantage.
What management, security, and integration capabilities does each switch provide?
The T8504-E is a managed switch. Specified network protocols include IPv4, IPv6, HTTP, HTTPS, SSH, SNMP, DNS, TCP, and UDP. Security features include password protection, HTTPS encryption, and VLAN support. The datasheet-sourced field adds SNMP v1/v2c/v3 and RADIUS/TACACS. It is managed via AXIS Device Manager software, enabling centralized configuration, monitoring, and firmware management within the Axis ecosystem. MAC table capacity is 8k entries; jumbo frames are supported up to 10 KB. Optional accessories include AXIS T91M47, T8611, and T8612.
The D8004 is an unmanaged switch. No management protocols, CLI, SNMP, VLAN, or security features are listed in the provided specs. Configuration is zero-touch: connect power and uplink, and the switch operates automatically. No management software is specified. Regulatory approvals are CE, FCC Part 15 Class B, RoHS, and WEEE—a narrower set than the T8504-E's approvals (EMC, FCC, ICES, VCCI, RCM, EAC, UL/IEC 60950-1, IEC 62368-1).
For deployments requiring network segmentation (VLAN), remote monitoring (SNMP), secure access control (RADIUS/TACACS), or integration into AXIS Device Manager, the T8504-E is the only specified option between these two. The D8004's unmanaged design is appropriate where simplicity, low IT overhead, and minimal configuration are priorities—such as small branch closets or single-camera pendant installations—but it offers no visibility or control once deployed.
Which should you choose: the T8504-E or the D8004?
Our take: The T8504-E is the stronger choice when deploying in outdoor or environmentally demanding locations, when managed network control is required, or when PoE power budget exceeds 60W. Concretely: it provides a 150W PoE budget versus the D8004's 60W total; it operates from -40°C versus the D8004's 0°C floor; and it delivers full management capabilities—VLAN, SNMP v1/v2c/v3, HTTPS, RADIUS/TACACS, AXIS Device Manager—while the D8004 is unmanaged with no stated protocol support. Additionally, the T8504-E includes a 6kV surge protection rating on all ports and AC lines, and a 5-year warranty versus the D8004's 3-year warranty. The D8004 suits controlled-environment, low-complexity, cost-sensitive indoor installations where plug-and-play simplicity and a compact 172 g footprint outweigh the need for power headroom, environmental hardening, or network management.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Axis T8504-E | Axis D8004 |
|---|---|---|
| SKU | 01449-001 | 02101-004 |
| Environment Rating | Outdoor (NEMA 250 Type 4X) | Indoor only |
| PoE Standard | IEEE 802.3at (PoE+) | IEEE 802.3af/at (PoE/PoE+) |
| Total PoE Budget | 150W | 60W max |
| PoE per Port | 60W (P1–2) / 30W (P3–4) | Up to 30W per port (60W total shared) |
| PoE Ports | 4× RJ45 PoE+ | 4× RJ45 PoE |
| Uplink | 1× SFP Fiber | 1× RJ45 10/100BASE-TX |
| Switching Capacity | 10 Gbps / 7.44 Mpps | Not specified |
| Management | Managed (VLAN, SNMP, SSH, RADIUS/TACACS) | Unmanaged |
| Operating Temperature | -40°C to 60°C (spec) / 50°C (datasheet) | 0°C to 50°C |
| Surge Protection | 6kV (all network ports and AC lines) | Not specified |
| Casing | Aluminum | Metal |
| Weight | 2.9 kg (6.39 lbs) | 172 g (0.38 lb) |
| Dimensions | 240 × 166 × 72 mm | 90 × 80 × 21 mm |
| Warranty | 5 years | 3 years |
| Regulatory Approvals | EMC, FCC, ICES, VCCI, RCM, EAC, UL/IEC 60950-1, IEC 62368-1 | CE, FCC Part 15 Class B, RoHS, WEEE |
Frequently Asked Questions
Which should you choose: the T8504-E or the D8004?
The T8504-E is the stronger choice when deploying in outdoor or environmentally demanding locations, when managed network control is required, or when PoE power budget exceeds 60W. Concretely: it provides a 150W PoE budget versus the D8004's 60W total; it operates from -40°C versus the D8004's 0°C floor; and it delivers full management capabilities—VLAN, SNMP v1/v2c/v3, HTTPS, RADIUS/TACACS, AXIS Device Manager—while the D8004 is unmanaged with no stated protocol support. Additionally, the T8504-E includes a 6kV surge protection rating on all ports and AC lines, and a 5-year warranty versus the D8004's 3-year warranty. The D8004 suits controlled-environment, low-complexity, cost-sensitive indoor installations where plug-and-play simplicity and a compact 172 g footprint outweigh the need for power headroom, environmental hardening, or network management.
Can the T8504-E or D8004 power a PTZ camera that draws close to 60W?
The T8504-E can power up to two 60W devices simultaneously on ports 1 and 2 (IEEE 802.3at Type 2 Class 4, four-pair pin assignment), within its 150W total budget. The D8004's entire PoE output is capped at 60W across all four ports combined, so a single 60W device would consume the full budget, leaving no power for additional cameras. For high-draw PTZ cameras, the T8504-E is the specified fit.
Is either switch suitable for a rooftop or parking-lot camera installation?
The T8504-E is specified for outdoor use with a NEMA 250 Type 4X rating, an operating temperature floor of -40°C, and 6kV surge protection on all ports and AC lines—making it the appropriate choice for exposed outdoor installations. The D8004 carries an indoor-only rating and an operating temperature floor of 0°C; no IP or NEMA enclosure rating and no surge protection figure are provided in its specs. The D8004 should not be selected for uncontrolled outdoor environments based on the available specifications.
Which switch works with AXIS Device Manager, and does that matter for a small installation?
The T8504-E is explicitly listed as managed via AXIS Device Manager, supporting SNMP, VLAN, RADIUS/TACACS, and SSH. The D8004 is unmanaged and no management software compatibility is stated in its specs. For small installations with only a few cameras and no requirement for network segmentation or remote monitoring, the D8004's zero-configuration design may reduce deployment time and IT complexity. For sites already running AXIS Device Manager or requiring VLAN isolation between cameras and corporate LAN, the T8504-E is the only option between these two with the specified management capabilities.
More Network Switch Comparisons
- Vivotek GET-083A-120 vs TP-Link SG1005P
- Vivotek GET-083A-120 vs Axis T8504-E
- Vivotek GET-083A-120 vs Axis D8004
- Vivotek GET-083A-120 vs Ubiquiti N-SW
- TP-Link SG1005P vs Axis T8504-E
- TP-Link SG1005P vs Axis D8004
Network Switch Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.