APC by Schneider Electric BN1350M2-CA vs Vertiv PSA6-1350LVT: Specification Comparison
Both the APC BN1350M2-CA and the Vertiv PSA6-1350LVT are 1350 VA line-interactive desktop UPS units designed for 120 V North American environments, targeting workstations, networking gear, and small server applications. This comparison evaluates their power capacity and output configuration, runtime and battery characteristics, and physical and environmental specifications to help installers and IT buyers determine which unit better fits their deployment requirements.
In This Guide
- Which unit delivers more usable power and better output protection?
- How do the two units compare on battery life, recharge time, and runtime support?
- Which unit is better suited for space-constrained or environmentally demanding installations?
- Which should you choose: the BN1350M2-CA or the PSA6-1350LVT?
- Side-by-Side Specs
- FAQ
Which unit delivers more usable power and better output protection?
The APC BN1350M2-CA is rated at 1350 VA / 810 W, while the Vertiv PSA6-1350LVT is rated at 1350 VA / 850 W. The Vertiv unit's 850 W real-power rating represents a marginally higher power factor (0.63 vs 0.60), meaning it can support slightly heavier resistive loads before clipping.
On outlet configuration, the APC BN1350M2-CA provides 10 total outlets: 6 NEMA 5-15R with battery backup and 4 NEMA 5-15R with surge-only protection. It also includes 2 USB charging ports and coaxial data-line protection (CATV/SATV/modem). The Vertiv PSA6-1350LVT's outlet count and USB port configuration are not disclosed in the provided specifications.
Both units are line-interactive topology. The APC specifies a stepped-approximation sinewave output waveform; the Vertiv's output waveform type is not specified in the provided data. The APC lists a transfer time of 8 ms typical / 10 ms maximum; Vertiv's transfer time is not provided. APC also specifies 1080 J surge energy rating and full-time multi-pole noise filtering; equivalent figures are absent from the Vertiv spec sheet.
How do the two units compare on battery life, recharge time, and runtime support?
The APC BN1350M2-CA uses a sealed lead-acid battery with a stated service life of 3–5 years and a recharge time of 16 hours. Battery charger power is rated at 10 W. No runtime curve data was provided in the supplied specifications for either unit, so protected runtime at specific load levels cannot be directly compared here.
The Vertiv PSA6-1350LVT's battery chemistry, recharge time, battery life, and charger wattage are not disclosed in the provided specifications. Buyers requiring battery longevity or recharge-cycle data for the Vertiv unit should consult the manufacturer's full datasheet (referenced as PSA6-1350LVT.pdf).
A notable differentiator is warranty coverage of the battery itself: Vertiv explicitly states '3-year full unit coverage including battery with advanced replacement,' meaning the battery is covered under the same term as the unit. APC's warranty is '3 years repair or replace' but does not explicitly call out battery inclusion in the provided spec data, which is a common point of variation between UPS vendors and warrants buyer verification.
Which unit is better suited for space-constrained or environmentally demanding installations?
The APC BN1350M2-CA measures 26 cm H × 10 cm W × 36.8 cm D and weighs 10.4 kg (approximately 22.9 lbs). The Vertiv PSA6-1350LVT measures 11.42 in H × 4.72 in W × 16.93 in D (approximately 29.0 cm × 12.0 cm × 43.0 cm) and weighs 25.8 lbs (approximately 11.7 kg). The Vertiv unit is taller, wider, and deeper, and approximately 1.3 kg heavier.
The APC BN1350M2-CA provides detailed environmental ratings: operating temperature 0–40 °C, operating relative humidity 0–95% non-condensing, operating altitude up to 10,000 ft, and acoustic level of 45 dBA. Storage temperature is rated at –15 to 40 °C. None of these environmental parameters are provided in the Vertiv PSA6-1350LVT specification data supplied.
APC holds certifications including ENERGY STAR V2.0, NOM, and TUV C-US. The Vertiv PSA6-1350LVT's certifications are not listed in the provided specifications. The Vertiv is described as a Desktop/Tower form factor; APC's form factor designation is not stated in the provided data, though its physical dimensions suggest desktop or tower use.
Which should you choose: the BN1350M2-CA or the PSA6-1350LVT?
Our take: The BN1350M2-CA is the stronger choice when outlet count, documented environmental ratings, and fully disclosed battery specifications are decision factors. APC specifies 10 outlets (6 battery-backed, 4 surge-only) vs. Vertiv's undisclosed outlet count, a transfer time of 8 ms typical vs. Vertiv's unstated figure, and a battery service life of 3–5 years vs. no published Vertiv battery life data. The Vertiv PSA6-1350LVT edges ahead on real-power output at 850 W vs. APC's 810 W, and its warranty explicitly covers the battery with advanced replacement — a meaningful advantage for buyers who prioritize RMA simplicity. The Vertiv is also larger and heavier. Where environmental compliance, noise filtering, coaxial data-line protection, and USB charging ports matter — typical for AV or mixed-use workstation deployments — the APC spec sheet is substantially more complete. Buyers evaluating the Vertiv should obtain the full datasheet before specifying.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | APC by Schneider Electric BN1350M2-CA | Vertiv PSA6-1350LVT |
|---|---|---|
| VA Rating | 1350 VA | 1350 VA |
| Watt Rating | 810 W | 850 W |
| UPS Topology | Line interactive | Line interactive |
| Output Waveform | Stepped approximation to sinewave | — |
| Input Voltage | 120 V | 120 VAC |
| Input Voltage Range | 88–139 V | — |
| Transfer Time | 8 ms typical / 10 ms maximum | — |
| Total Outlets | 10 (6 battery + 4 surge) | — |
| USB Charging Ports | 2 | — |
| Surge Energy Rating | 1080 J | — |
| Battery Type | Lead-acid | — |
| Battery Life | 3–5 years | — |
| Battery Recharge Time | 16 h | — |
| Acoustic Level | 45 dBA | — |
| Dimensions (H × W × D) | 26 × 10 × 36.8 cm | 29.0 × 12.0 × 43.0 cm (approx.) |
| Weight | 10.4 kg (22.9 lbs) | 11.7 kg (25.8 lbs) |
| Operating Temp | 0–40 °C | — |
| Warranty | 3 years repair or replace | 3-year full unit incl. battery, advanced replacement |
| Certifications | ENERGY STAR V2.0, NOM, TUV C-US | — |
Frequently Asked Questions
Which should you choose: the BN1350M2-CA or the PSA6-1350LVT?
The BN1350M2-CA is the stronger choice when outlet count, documented environmental ratings, and fully disclosed battery specifications are decision factors. APC specifies 10 outlets (6 battery-backed, 4 surge-only) vs. Vertiv's undisclosed outlet count, a transfer time of 8 ms typical vs. Vertiv's unstated figure, and a battery service life of 3–5 years vs. no published Vertiv battery life data. The Vertiv PSA6-1350LVT edges ahead on real-power output at 850 W vs. APC's 810 W, and its warranty explicitly covers the battery with advanced replacement — a meaningful advantage for buyers who prioritize RMA simplicity. The Vertiv is also larger and heavier. Where environmental compliance, noise filtering, coaxial data-line protection, and USB charging ports matter — typical for AV or mixed-use workstation deployments — the APC spec sheet is substantially more complete. Buyers evaluating the Vertiv should obtain the full datasheet before specifying.
Does the APC BN1350M2-CA or the Vertiv PSA6-1350LVT provide more backup outlets?
The APC BN1350M2-CA provides 10 total outlets: 6 NEMA 5-15R with battery backup and 4 NEMA 5-15R with surge-only protection. The Vertiv PSA6-1350LVT's outlet count is not disclosed in the provided specifications, so a direct comparison cannot be made from available data alone.
Which UPS has better battery warranty coverage — the BN1350M2-CA or the PSA6-1350LVT?
The Vertiv PSA6-1350LVT explicitly states '3-year full unit coverage including battery with advanced replacement,' which covers the battery under the same term as the unit. The APC BN1350M2-CA carries a '3 years repair or replace' warranty, but the provided specification does not explicitly state whether the battery is included under that coverage. Buyers should confirm APC battery warranty terms directly before specifying.
Which unit is more compact — the APC BN1350M2-CA or the Vertiv PSA6-1350LVT?
The APC BN1350M2-CA is smaller: 26 cm H × 10 cm W × 36.8 cm D and 10.4 kg. The Vertiv PSA6-1350LVT measures approximately 29.0 cm H × 12.0 cm W × 43.0 cm D and weighs 25.8 lbs (approximately 11.7 kg), making it taller, wider, deeper, and roughly 1.3 kg heavier than the APC unit.
More UPS Comparisons
- APC by Schneider Electric BN1350M2-CA vs CyberPower CP1350PFCLCD
- APC by Schneider Electric BN1350M2-CA vs APC by Schneider Electric BN1350M2
- APC by Schneider Electric BN1350M2-CA vs APC by Schneider Electric BR1350MS
- CyberPower CP1350PFCLCD vs APC by Schneider Electric BN1350M2
- CyberPower CP1350PFCLCD vs APC by Schneider Electric BR1350MS
- CyberPower CP1350PFCLCD vs APC by Schneider Electric BX1350M
UPS Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.