Altronix NETWAYSP4BTWPX vs Altronix NETWAY4EBTB: Specification Comparison
Both the Altronix NETWAYSP4BTWPX and NETWAY4EBTB are 4-port Gigabit PoE switches sharing an identical 240W total budget with 90W per port via IEEE 802.3bt (PoE++), single-mode fiber SFP uplink capability, and lifetime warranties. The critical divergence is form factor: the NETWAYSP4BTWPX ships as a self-contained NEMA 4/4X IP66 outdoor enclosure with integrated battery backup charging, while the NETWAY4EBTB is a bare switch board requiring an external enclosure and power source. Buyers choosing between them are typically deciding between a turnkey outdoor deployment and a cabinet-integrated board solution.
In This Guide
- Do both switches deliver the same PoE power capacity and standards compliance?
- Which unit is designed for outdoor or harsh-environment deployment?
- How do the two switches differ in uplink configuration and network management?
- Which should you choose: the NETWAYSP4BTWPX or the NETWAY4EBTB?
- Side-by-Side Specs
- FAQ
Do both switches deliver the same PoE power capacity and standards compliance?
Both models match on PoE budget: 240W total with a maximum of 90W per port across all 4 ports, and both conform to IEEE 802.3bt 4PPoE (PoE++). This means either unit can drive high-draw endpoints such as PTZ cameras, multi-radio access points, or pan-tilt-zoom housings at full per-port allocation.
The NETWAYSP4BTWPX includes an integrated LiFePO4 battery charger, enabling connection to a backup battery (ordered separately) so powered devices remain online during an AC outage. The NETWAY4EBTB specifies a 48–56V DC input, meaning it draws from an external DC power source or PDU; no battery backup or charger circuit is mentioned in its specifications.
For installations where uninterrupted PoE is a project requirement, the NETWAYSP4BTWPX's built-in charger is a concrete differentiator. The NETWAY4EBTB's 48–56V DC input makes it suited for cabinet environments where a separate UPS or PDU already handles power conditioning and backup.
Which unit is designed for outdoor or harsh-environment deployment?
The NETWAYSP4BTWPX is housed in a NEMA 4/4X IP66-rated outdoor enclosure measuring 17.53" x 15.3" x 6.67". It carries an operating temperature rating of -40°C to 60°C (-40°F to 140°F) and a storage rating of -30°C to 85°C. The enclosure supports wall, pole, and rack mounting, with stainless or powder-coat construction noted. It is a standalone weatherproof unit installable at the edge without a separate cabinet.
The NETWAY4EBTB is a switch board measuring 6.25" x 4.5" x 1.25" with a rack mount type. No IP rating, NEMA rating, or outdoor operating temperature range is specified for this model. Its storage temperature matches at -30°C to 85°C, but no ambient operating temperature floor or ceiling is provided in the available specifications.
For any installation exposed to weather, temperature extremes, or dust and moisture ingress, only the NETWAYSP4BTWPX carries verified environmental ratings. The NETWAY4EBTB is appropriate where it will be housed inside a conditioned or protected enclosure provided by the installer.
How do the two switches differ in uplink configuration and network management?
The NETWAYSP4BTWPX provides dual 1G SFP fiber uplinks alongside its 4 PoE++ downstream ports, supporting redundant or aggregated fiber backbone connections. It integrates with Altronix LINQ for remote monitoring and management and supports standard SNMP and a managed switch CLI. This positions it as a managed, remotely observable node in larger networked security systems.
The NETWAY4EBTB specifies a single-mode fiber SFP uplink (connectivity listed as Single-Mode Fiber) and is noted as LINQ compatible for supervision. The number of SFP uplink ports is not explicitly stated in the provided specifications beyond the single connectivity descriptor. No mention of SNMP or CLI management features appears in its spec data.
For integrators building managed, multi-node fiber backbones with redundancy requirements, the NETWAYSP4BTWPX's dual SFP uplinks and documented SNMP/CLI management provide more infrastructure flexibility. The NETWAY4EBTB's LINQ compatibility covers basic supervision but its uplink and management depth is less fully characterized in the available specifications.
Which should you choose: the NETWAYSP4BTWPX or the NETWAY4EBTB?
Our take: The NETWAYSP4BTWPX is the stronger choice when the installation point is exposed to outdoor conditions, requires battery backup capability, or demands dual fiber uplinks with full managed-switch features. Concretely: it carries a NEMA 4/4X IP66 rating and a -40°C to 60°C operating range versus no environmental rating or operating temperature spec on the NETWAY4EBTB; it includes an integrated LiFePO4 battery charger for backup power while the NETWAY4EBTB has no charger circuit specified; and it offers dual 1G SFP fiber uplinks with SNMP/CLI management versus a single fiber uplink descriptor and LINQ-only supervision on the NETWAY4EBTB. The NETWAY4EBTB is the appropriate choice for cabinet or PDU-integrated deployments where an external enclosure, DC power source, and upstream UPS already exist and a compact 6.25" x 4.5" board form factor is required. Both carry lifetime warranties and identical 240W PoE++ budgets.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Altronix NETWAYSP4BTWPX | Altronix NETWAY4EBTB |
|---|---|---|
| Product Type | PoE Switch | PoE Switch |
| PoE Standard | IEEE 802.3bt 4PPoE (PoE++) | IEEE 802.3bt 4PPoE (PoE++) |
| PoE Ports | 4x Gigabit PoE++ | 4x Gigabit PoE++ |
| Total PoE Budget | 240W | 240W |
| Max Power per Port | 90W | 90W |
| Fiber Uplinks | Dual 1G SFP (Single-Mode) | Single-Mode Fiber SFP (count not specified) |
| Form Factor | Outdoor Enclosure | Switch Board |
| Enclosure / IP Rating | NEMA 4/4X, IP66 | — |
| Operating Temperature | -40°C to 60°C (-40°F to 140°F) | — |
| Storage Temperature | -30°C to 85°C (-22°F to 185°F) | -30°C to 85°C (-22°F to 185°F) |
| Input Voltage | — | 48–56V DC |
| Battery Backup | Yes (LiFePO4 charger integrated) | — |
| Management | LINQ + SNMP + Managed CLI | LINQ compatible |
| Mount Type | Wall / Pole / Rack | Rack |
| Dimensions | 17.53" x 15.3" x 6.67" | 6.25" x 4.5" x 1.25" |
| Warranty | Lifetime | Lifetime |
Frequently Asked Questions
Which should you choose: the NETWAYSP4BTWPX or the NETWAY4EBTB?
The NETWAYSP4BTWPX is the stronger choice when the installation point is exposed to outdoor conditions, requires battery backup capability, or demands dual fiber uplinks with full managed-switch features. Concretely: it carries a NEMA 4/4X IP66 rating and a -40°C to 60°C operating range versus no environmental rating or operating temperature spec on the NETWAY4EBTB; it includes an integrated LiFePO4 battery charger for backup power while the NETWAY4EBTB has no charger circuit specified; and it offers dual 1G SFP fiber uplinks with SNMP/CLI management versus a single fiber uplink descriptor and LINQ-only supervision on the NETWAY4EBTB. The NETWAY4EBTB is the appropriate choice for cabinet or PDU-integrated deployments where an external enclosure, DC power source, and upstream UPS already exist and a compact 6.25" x 4.5" board form factor is required. Both carry lifetime warranties and identical 240W PoE++ budgets.
Can either switch power a 90W PoE++ device on every port simultaneously?
Yes. Both the NETWAYSP4BTWPX and NETWAY4EBTB specify a 240W total PoE budget with 90W per port across 4 ports, and both comply with IEEE 802.3bt 4PPoE (PoE++). Either switch can deliver the maximum 90W to all four ports simultaneously up to the 240W aggregate ceiling.
Is the NETWAYSP4BTWPX or NETWAY4EBTB better suited for a pole-mounted outdoor camera node?
The NETWAYSP4BTWPX is the only option specified for outdoor use. It carries a NEMA 4/4X IP66 enclosure rating, an operating temperature range of -40°C to 60°C, and supports wall and pole mounting. The NETWAY4EBTB is a bare board with no IP or NEMA rating and no outdoor operating temperature specification, making it unsuitable for direct outdoor exposure without a separately sourced weatherproof enclosure.
Does either switch include battery backup, and do I need to buy batteries separately?
Only the NETWAYSP4BTWPX includes an integrated LiFePO4 battery charger circuit, enabling battery backup for connected PoE devices during power outages. The specification notes battery backup as 'Yes' but compatible batteries are listed as ordered separately. The NETWAY4EBTB has no battery backup or charger circuit noted in its specifications.
More Network Switch Comparisons
- Vivotek GET-083A-120 vs TP-Link SG1005P
- Vivotek GET-083A-120 vs Axis T8504-E
- Vivotek GET-083A-120 vs Axis D8004
- Vivotek GET-083A-120 vs Ubiquiti N-SW
- TP-Link SG1005P vs Axis T8504-E
- TP-Link SG1005P vs Axis D8004
Network Switch Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.